Omega Omega Pro 80600 Instructions for use

Portable Power Supply & Jump Starter
Model
80600, 80600R
Operating Instructions & Parts Manual
Read this manual and follow all the Safety Rules and Operating Instructions before using this product.
Capacity
6,000 mAh
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
!
SFA Companies
• Read,understandandfollowtheinstructionsbeforeusingtheproduct.
• Theoperatingmanualandsafetyinformationshouldbecommunicatedinthenative
language of the operator before use.
• Failuretodosomaycausepersonalinjuryandorpropertydamage.
USPatentNo.6,531,789B1
USPatentNo.7,498,798B2
WARNING
!

2
SAFETY AND GENERAL INFORMATION
Foryoursafety,read, understand, and follow the information provided with and on this Intelligent
Jumpstarter. The owner and operator shall have an understanding of this product and safe operating
procedures before attempting to use. Make certain that the operator thoroughly understands the
inherent dangers associated with the use and misuse of the product. If any doubt exists as to
thesafeandproperuseofthisproduct,removefromservice immediately. To avoid the host unit
burning,pleasetakeoffjumpstartclampsfromthecarbatterywithinlessthan15secondsonce
the car engine is started.
Inspect before each use. DO NOTuseiftherearebroken,bent,crackedordamagedparts
(includinglabels).Any Intelligentjumpstarter that appears damaged in any way, or operates
abnormally shall be removed from service immediately.
Lithium Polymer batteries are volatile. FAILURE to read and follow the use and operating
instructionsmayresultinre,personalinjuryanddamagetopropertyifchargedorusedimproperly.
Li-Polymerbatterymayexplodeandcausereifmisusedordefective.
When charging Intelligent Jumpstarter, place on a hard level surface and keep away from
combustible materials. DO NOT leave unattended while charging OR FIRE COULD RESULT!
Always use Intelligent Jumpstarter in a well ventilated area and keep out of reach of children and
away from combustible materials and all liquids OR CHILDREN COULD BE INJURED!
The Intelligent Jumpstarter is designed to be used only on vehicles or boats with 12V electrical
systems. USEonothersystemscancausedamagetounitoryourbatteryand/orresultinre
and CAUSE INJURY.
The unit is not designed to be used in place of a vehicle battery.
DO NOTinsertforeignobjectsintoanysockets,vents,oranyopeningintheunit;otherwise
damage,reorinjurycouldresult.
NEVERdisassembleormodifytheunit.Onlycertiedrepairtechnicianshouldrepairthisunit;
otherwisedamage,reorinjurycouldresult.
DO NOT storeinanylocationwheretemperaturemayexceed150°For70°C,Chargeonlyat
ambienttemperaturesbetween32°For0°C-140°For60°C;otherwisedamage,reorinjury
could result.
PRODUCT DESCRIPTION - Intelligent Jumpstarter
The Intelligent Jumpstarter is a high performance electrical product with many innovative features
andbenets.Increased Safety: Reverse polarity protection- output short circuit protection - exces-
sive voltage protection - excessive current protection - no sparking to ensure safety and inverse
chargeprotection-basedonanarticialintelligence(AI)platformprovidingusersafety.Low Power
Starting:Thisproductcansuccessfullyjumpstartvehiclesevenwithonly3powerstatuslights
showing. Low Voltage Detection: Even with internal voltage of the car battery as low as 0.06V an
engine can be started using this unique product. Low Inner Resistance: The low inner resistance
andsmallsizeofthisunitisuniqueequipment,outperformsothersimilarlookingproductsandcan
jumpstart12Vvehiclewithgasolineenginesupto5.0Ldependingonmodel.
STANDARD PACKAGE
1. Host unit
2. Smart Jump Start Cable
3. USBconnectioncable
4. USBWallAdapter
5. UserManual
!
WARNING If the unit swells or is cracked or damaged DO NOT USE. Immediately
disconnect from charging source or devices or batteries undergoing charge. Useofswollen
ordamagedunitcancausefire,propertydamageorinjury. Rechargeable batteries should
be recycled at battery recycling drop-off facilities which can be found in many locations.
!WARNING

3
CHARGING THE JUMPSTARTER
* At Home
1. Insert the USB wall adapter provided into an outlet and insert the USB plug into the wall
adapter.InsertthemicroUSBplugintotheJumpStarterchargingport.
2. TheLED'sashindividuallyduringcharging.Theunitisfullychargedonceall4powerLED's
are on.
3. Chargetimetofullcapacityisbasedonsize,seeSpecicationstablefordetails.
* In A Vehicle
1. Ensurethatthevehicleelectricalsystemis12V.DoNotattempttochargetheunitfroma24V
vehicle system.
2. InserttheUSBplugintoanappropriate12VchargingsocketwithUSBoutput(notincluded).
InsertthemicroUSBplugintotheJumpStarterchargingport.
3. TheLED'sashindividuallyduringcharging.Theunitcellisfullychargedonceall4power
LED's are on.
*From A Desktop Computer or Laptop
1. InserttheUSBplugintotheUSBportofthecomputerwiththecomputerturnedon.Insert
microUSBplugintotheJumpStarterchargingport.
NOTICE:Tomaintaintheinternalbatteryoftheequipment,chargetheunitassoonaspossible
after using to start a vehicle or to charge batteries in other electrical equipment.
NOTICE: Iftheproductisnotusedforalongperiodoftime,fullychargetheunitthenstoreit.
Chargeonceevery3months.
OPERATIONAL GUIDANCE
* Power Indicator
1. Pressthepowerbuttontoshowpowerindicatorlight,seebelow.
Power Indicator Lightless LED Flash 1 LED 2 LED 3 LED 4 LED
BatteryCapacity 0% 10% 25% 50% 75% 100%
2. Toensureoptimumconditionofunitbattery,chargefullyassoonaspossibleafteruse.
3. Ifthepowerindicatorlightremainsoffafterswitchingtothe"on"position,theunitcellisfully
discharged. Please charge the unit as soon as possible to avoid damage.
Jump Start 12V for Gasoline Engines under 5 Liters (310 in³)
1. Withaminimumof3powerindicatorLEDalight,thisunitcansuccessfullyjumpstarta12V
petrolvehiclewithenginesupto5L.Chargetheunitimmediatelyafteruse.
2. Beforeattemptingtojumpstartavehicle,itisadvisabletoturnoffallvehicleelectricalappli-
ances,suchasradio,airconditioning,internalandexternallightsetc.
3. InsertthelargerJumpStartercableblockintothe12VJumpStartersocket.
4. ConnecttheredclampoftheJumpStartercabletotheREDpositive(+)batterycableand
theblackclamptotheBLACKnegative(-)batterycable.Thegreenlightonthecabletop-box
willlightwhentheclampsarecorrectlyttedtothevehiclebatterycables.Theredlightonthe
cabletop-boxwilllightiftheclampsareincorrectlyttedtothevehiclebatterycables.
IMPORTANT:Iftheredlightisonthecabletop-boxthencheckandre-ttheclampstothe
vehicle battery before attempting to start the engine.
5. Ifthegreenlightisonthecabletop-boxthenyoucanturnthevehicleignitiononandstartthe
engine.
6. Afterthevehicleengineisstarted,thecabletop-boxashesandcutsoffthepowercircuitto
invoke inverse charge protection.
7. OncetheJumpStarterisconnectedtothevehiclebattery,thecabletop-boxbeginstocount.
Ifthetimeexceeds45secondsandthecabletop-boxentersdormancymodeshowinga
slowashredlight.Justremovetheredclampfromavehiclebatteryandconnectitback.
The green light illuminates again and then users can start the vehicle engine.
IMPORTANT: Operational guidance is continued on the next page. Please read ALL the
instructions before using the unit to avoid damage to the unit or property and injury.

4
OPERATIONAL GUIDANCE CONTINUED
8. Remove the blue plug of Jump Starter cable block from the 12 V Jump Starter socket of the
host and then remove the clamps of Jump Starter from the car battery.
!
WARNING: DONOTleavethehostunitconnectedtoacarbatteryformorethan15seconds
ortheunitcancatchre.DISCONNNECTtheunitwithinlessthan15secondsofusewhether
or not the car starts OR FIRE AND/OR INJURY COULD RESULT!
NOTICE
If the red and green lights on the black box of the Smart Jump Starter cable are not working during
jumpstartingthevehicle,pleaseresetthejumpstarterasfollows:
1. Removetheredclampfromthepositive(+)terminalofthecarbattery.
2. Connecttheredclampbackonthepositive(+)terminal.Nowthegreenlightisonagainand
the product is ready for use.
NOTICE:
1. Beforeattemptingtostarttheengineofavehicle,checkthatthebluecableplugisfullyinserted
into the unit's 12 V Jump Starter socket. Failure to have this properly connected to the unit can
cause a bad connection which may result in failure to start or damage to the unit/plug.
2. Iftheenginefailstostart,(1)checkthattheJumpStarterpowerLEDshaveatleast3barslit,
(2) checkthatthevehicleisinfullworkingorder,(3)checkthatthevehicle'sbatteryhasenough
charge,(4)checkthattheclampsarefullyconnectedtothevehicle'sbattery.
3. Iftheenvironmentambienttemperatureislowerthan14°F/-10°Catthelocationofthecarbat-
tery,thevehicleenginemaynotstartonthersttry.
The vehicle's battery will need to reach a
working temperature in order to be started smoothly.
OUTPUT: USB DC5V/2A
1. UseaUSBconnectioncabletocharge5Vmobilephonesandotherelectronicproductsfrom
theUSB5V2AoutputportoftheJumpStarter.
2. Connect the product to the Jump Starter and then press the power switch. The power LEDs
arealight;meantheJumpStarterischargingtheproduct.
LED TORCH
Switch button operating cycle is as follows:
1. Press twice the power switch to start the LED torch.
2. Press once more to enter S.O.S. mode.
3. Pressagaintoturnoffthelight.
Specication 80600,80600R
Output
USB-DC5V/2A
Jumpstartport(EC5)-DC12V
Input DC5V/1A
Charge Time 6hourson5V/1A
Capacity 6,000mAh
Weight 8.47oz.
Dimensions 5.43x2.95x
.63in
Starting Current 350A
Peak Current 700 A
Suitable Engine 12V/GasolineEngine<5.0L
Operating Temp.
Storage Temp.
-4°F~140°F(-20°C~60°C)
-4°F~176°F(-20°C~80°C)
SPECIFICATIONS
LED Torch
12 V Jumpstart
Socket
USB5V/2A
Output
MicroUSB
Input Charge Port
Power
Switch
Power
Indicator

Item Part No. Description Qty
1 80600-1 Host Unit 1
2 80600-2 Smart Jump Start Cable 1
3 80600-3 USBCable 1
4 80600-5 EVA Case 1
5 80600-6 USBWallAdapter 1
- - User Manual 1
REPLACEMENT PARTS
Available Parts: Please refer to the Parts drawing when ordering parts. Not all components of the
productarereplacementitems,butareillustratedasaconvenientreferenceoflocationandposition
intheassemblysequence.Whenorderingparts,givemodelnumber,partnumberanddescription.
MODEL Intelligent Jumpstarter
Looking for dependable automotive tools?
Rely on Omega Lift Equipment for quality and long-lasting products.
ONE YEAR LIMITED WARRANTY
Foraperiodofone(1)yearfromdateofpurchase,SFA Companieswillrepairorreplace,atits
option,withoutcharge,anyofitsproducts,whichfailsduetoadefectinmaterialorworkmanship
under normal usage. This limited warranty is a consumer's exclusive remedy.
Exceptwhere suchlimitationsand exclusionsarespecifically prohibitedbyapplicable law,(1)
THE CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR
REPLACEMENT OF DEFECTIVE PRODUCTS AS DESCRIBED ABOVE. (2) SFA
CompaniesSHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGEORLOSSWHATSOEVER.(3)ANYIMPLIEDWARRANTIES,INCLUDINGWITHOUT
LIMITATIONTHE IMPLIED WARRANTIES OF MERCHANTABILITYAND FITNESS FORA
PARTICULAR PURPOSE, SHALL BE LIMITEDTO ONE YEAR, OTHERWISE THE REPAIR,
REPLACEMENTORREFUNDASPROVIDEDUNDERTHISEXPRESSLIMITEDWARRANTY
ISTHE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEUOFALL
OTHER WARRANTIES, EXPRESS OR IMPLIED. (4) ANY MODIFICATION,ALTERATION,
ABUSE, UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS THIS WARRANTY
ANDISNOTCOVEREDBYTHISWARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so the above
limitationmay not apply to you. Some states do not allow the exclusion or limitation of
incidental or consequentialdamages,sotheabovelimitationorexclusionmaynotapplytoyou.
This warranty gives you specific legal rights, and you may also have other rights, which vary
fromstatetostate.
This manual suits for next models
1
Table of contents
Other Omega Power Supply manuals
Popular Power Supply manuals by other brands

Comelit
Comelit 1537 manual

Amada
Amada IP-500A Operation manual

Somogyi
Somogyi home MX 655/2 instruction manual

Rockwell Automation
Rockwell Automation Allen-Bradley PowerFlex SCR user manual

Technical Pro
Technical Pro PS9U operating instructions

Bellcome
Bellcome Touch Line SCU.VDR03.BLG14 Technical instructions