Omni OL603B User manual

OL603B (BLE) Cabinet Lock
User Manual
Furniture application type:
Drawer，cupboard，Forward slip,
Sliding drawer, under desk
Size
Weight
Environment
temperature
Humidity
Battery
Battery
lifespan
Bluetooth
Operation
way
63mm*58mm*20mm
55g (without battery)
+5°~+35°C
20%~75% relative humidity, no consendation
CR123A, 3V, Lithium battery
1 year or 1000 unlocking times
Radio distance 10meters
APP, smart phone number registration account
Activation
APP Operation Description：
Installation
1. Insert in a Sony or Panasonic batteryCR123A，3V，lowest power
capacity is 1400mAh and make sure the electrode correct. After
installed the battery, the master lock will spread out buzzer sound.
2. Using screwdriver to install the battery coverback.
Before install，please test the master with lock and
unlock function normally.
Download APP, create an new account and log in
APP Operation Step: firstly, open Bluetooth in your phone.
The operation during the process of storehouse and shipment. 1.Setting
2.Enter my cabinet lock
5.Press the nearest lock beside
your smart phone, -90 is the
farthest distance.
6.Then save it
7.Unlocking or home page
to scan the QR code
power reminding
Scan to unlock
3.Add my cabinet lock
The lock only can be installed in the wooden, plastic and non-
magnetic material and the the maximum thickness should be
25mm. The storehouse, front gate, drawer and sliding door
must be put in parallel, the pin seat and lock must be frame straight.
When you pulled up two pairs of screw, you need to check the
position correct and must make the necessary adjustment before
fixing up the screws.
4.Press for scanning
After changed the battery, please confirm the lock works
normally before close the battery cover, if battery lost or
damaged, you can not unlock it again.
We warmly suggest you to change battery in a regular
time, like once per year.

FCC Warning Statement
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.