Omron G70A User manual

I/O Block Base G70A 1
I/O Block Base
G70A
Reduces Wiring while Providing I/O
Flexibility
• Mount I/O relays and I/O SSRs freely.
• Electric-shock preventive (finger-touch protection) terminal
block incorporated conforming to VDE 0160.
• Connects to the PC and SBC easily via a connector.
• DIN track mounted.
• I/O Block conforming to VDE 0160.
Ordering Information
■List of Models
Note: Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range.
■Suitable Relay/SSR
Note: G2R-13-SN has twin cross-bar contacts.
■Connecting Sockets for I/O Terminal Expansion
■Accessories (Order Separately)
G78-16-E Short Bar
Classification Internal I/O circuit common Rated voltage Model
Output NPN (+ common) 24 VDC G70A-ZOC16-3
PNP (– common) 24 VDC G70A-ZOC16-4
Input NPN/PNP 110 VDC max., 240 VAC max.
(See note)
G70A-ZIM16-5
Classification I/O Block Base PCB Relay Solid State Relay
Output NPN:G70A-ZOC16-3
PNP:G70A-ZOC16-4
G2R-1-S
G2R-1-SN
G3R-OA202SZN
G3R-OA202SLN
G3R-ODX02SN
G3R-OD201SN
G3RZ-201SLN
H3RN-1
H3RN-11
Input G70A-ZIM16-5 G2R-1A3-SN
G2R-13-SN
G2R-1A3-SND
G2R-13-SND
G3R-IAZR1SN
G3R-IDZR1SN
G3R-IDZR1SN-1
Model Number of poles
P2RF-05-E 1 pole (G2R: 1 pole usage)
P2RF-08-E 2 poles (G2R: 2 poles usage)
Applicable model Model
G70A-ZOC16-3
G70A-ZOC16-4
G78-16-E
G70A-ZIM16-5

2I/O Block Base G70A
Specifications
■Ratings/Characteristics
Note: Use a DC relay with a built-in diode because a DC relay without a built-in diode does not absorb any coil surge.
■Relay (G2R-1-S, G2R-1-SN)
Coil Ratings
Contact Ratings
Item G70A-ZOC16-3 G70A-ZOC16-4 G70A-ZIM16-5
Contact resistance 10 mΩ(excluding the resistance of the relay to be used)
Permissible current 10 A 100 mA
Max. operating voltage 380 VAC, 125 VDC 30 VDC
Dielectric strength 4,000 VAC, 50/60 Hz for 1 min between connector and
output terminals
2,000 VAC, 50/60 Hz for 1 min between output termi-
nals
250 VAC, 50/60 Hz for 1 min between connectors
4,000 VAC, 50/60 Hz for 1 min between connector and
input terminals
2,000 VAC, 50/60 Hz for 1 min between coil terminals
250 VAC, 50/60 Hz for 1 min between connectors
Insulation resistance Between connector and I/O terminals: 1,000 MΩ(at 500 V)
Other: 100 MΩ(at 500 V)
Vibration resistance Malfunction: 10 to 61.2 to 10 Hz, 0.1-mm single amplitude (0.2-mm double amplitude); 61.2 to 150 to 61.2 Hz,
14.7 m/s2
Shock resistance Malfunction: 200 m/s2
Noise immunity Noise level: 2.0 kV; pulse width: 100 ns to 1 µs
Ambient temperature Operating: 0°C to 55°C (with no icing)
Ambient humidity Operating: 35% to 85%
Coil surge absorption element Diode: 1 A, 400 V Varistor (see note)
Protection diode for inverse
connection
Diode (2 A, withstand inverse voltage: 40 V)
Tightening torque 0.59 N·m
Rated voltage 24 VDC
Rated current 21.8 mA
Coil resistance 1,100 Ω
Coil inductance Armature OFF 4.27
(H) (ref. value) Armature ON 8.55
Must operate voltage 70% min. of rated voltage
Must release voltage 15% min. of rated voltage
Max. voltage 110% of rated voltage
Power consumption Approx. 0.53 W
Number of poles 1 pole
Load Resistive load (cosφ= 1) Inductive load (cosφ= 0.4; L/R = 7 ms)
Rated load 10 A at 250 VAC; 10 A at 30 VDC 7.5 A at 250 VAC; 5 A at 30 VDC
Rated carry current 10 A
Max. operating voltage 380 VAC, 125 VDC
Max. operating current 10 A
Max. switching capacity 2,500 VA, 300 W 1,875 VA, 150 W
Min. permissible load 100 mA at 5 VDC

I/O Block Base G70A 3
■Relay (G2R-1A3-SN (SND), G2R-13-SN (SND))
Coil Ratings
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of +15%/–20% (AC rated current) or ±10%
(DC coil resistance).
2. LEDs are used for the built-in operation indicator. For models equipped with these indications, the VAC rated current must be increased
by approximately 1 mA; the VDC rated current, by approximately 4 mA.
3. Operating characteristics are measured at a coil temperature of 23°C.
Contact Ratings
Refer to Ratings/Characteristics of G70A-ZIM16-5.
■SSR
Ratings
Input Module
Input
Output
Output Module
Input
Output
Note: The minimum current value is measured at 10°C min.
Rated voltage 230 VAC 12 VDC 24 VDC
Rated current 50 Hz 3.7 mA 43.6 mA 21.8 mA
60 Hz 3.1 mA
Coil resistance 30,000 Ω275 Ω1,100 Ω
Must operate voltage 80% max. of rated voltage 70% max. of rated voltage
Must release voltage 30% min. of rated voltage 15% min. of rated voltage
Max. voltage 110% of rated voltage
Power consumption Approx. 0.7 W (60 Hz) Approx. 0.53 W
Model Rated voltage Operating voltage Input current Must operate voltage Must release voltage
G3R-IAZR1SN 100 to 240 VAC 60 to 264 VAC 15 mA max. 60 VAC max. 20 VAC min.
G3R-IDZR1SN 5 VDC 4 to 6 VDC 8 mA max. 4 VDC max. 1 VDC min.
12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min.
G3R-IDZR1SN-1 5 VDC 4 to 6 VDC 4 VDC max. 1 VDC min.
12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min.
Model Logic level supply voltage Logic level supply current
G3R-IAZR1SN 4 to 32 VDC 0.1 to 100 mA
G3R-IDZR1SN
G3R-IDZR1SN-1
Model Rated voltage Operating voltage Input current Must operate voltage Must release voltage
G3R-OA202SZN 5 to 24 VDC 4 to 32 VDC 15 mA max.
(at 25°C)
4 VDC max. 1 VDC min.
G3R-OA202SLN
G3R-ODX02SN 8 mA max.
G3R-OD201SN
Model Load voltage Load current (see note) Inrush current
G3R-OA202SZN 75 to 264 VAC 0.05 to 2 A 30 A (60 Hz, 1 cycle)
G3R-OA202SLN
G3R-ODX02SN 4 to 60 VDC 0.01 to 2 A 8 A (10 ms)
G3R-OD201SN 40 to 200 VDC 0.01 to 1.5 A 8 A (10 ms)

4I/O Block Base G70A
■Characteristics
Input Module
Output Module
Engineering Data
■When Mounted to a G2R
Item G3R-IAZR1SN G3R-IDZR1SN G3R-IDZR1SN-1
Operate time 20 ms max. 0.1 ms max. 15 ms max.
Release time 20 ms max. 0.1 ms max. 15 ms max.
Response frequency 10 Hz 1 kHz 10 Hz
Output ON voltage drop 1.6 V max.
Leakage current 5 µA max.
Insulation resistance 100 MΩmin. between input and output
Dielectric strength 4,000 VAC, 50/60 Hz for 1 min between input and output
Vibration resistance 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Shock resistance 1,000 m/s2
Ambient temperature Operating: –30°C to 80°C (with no icing)
Storage: –30°C to 100°C (with no icing)
Approved standards UL508 File No. E64562
CSA C22.2 (No. 14, No. 950) File No. LR35535
TÜV File No. R9650094 (EN60950)
Ambient humidity Operating: 45% to 85%
Weight Approx. 18 g
Item G3R-OA202SZN G3R-OA202SLN G3R-ODX02SN G3R-OD201SN
Operate time 1/2 of load power source
cycle + 1 ms max.
1 ms max.
Release time 1/2 of load power source cycle + 1 ms max. 2 ms max.
Response frequency 20 Hz 100 Hz
Output ON voltage drop 1.6 V max. 2.5 V max.
Leakage current 1.5 mA max. 1 mA max.
Insulation resistance 100 MΩmin. between input and output
Dielectric strength 4,000 VAC, 50/60 Hz for 1 min between input and output
Vibration resistance 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Shock resistance 1,000 m/s2
Ambient temperature Operating: –30°C to 80°C (with no icing)
Storage: –30°C to 100°C (with no icing)
Approved standards UL508 File No. E64562
CSA C22.2 (No. 14, No. 950) File No. LR35535
TÜV File No. R9650094 (EN60950)
Ambient humidity Operating: 45% to 85%
Weight Approx. 18 g
0 2 4 5 6 7.5 8 10 12 14
5
10
50
100
500
0 5 10 20 30 50 100 500
0.1
0.5
1
5
10
G2R-1A-S (24 VDC)
250 VAC resistive load
30 VDC resistive load
250 VAC inductive load
(cosφ=0.4)
30 VDC inductive load
(L/R=7ms)
Switching current (A)
Endurance (×104operations)
Endurance
DC inductive load
(L/R=7ms)
DC resistive load
AC resistive load
AC inductive load
(cosφ=0.4)
Switching current (A)
Switching voltage (V)
Maximum Switching Power
Note: The characteristics shown here are for 16-point mounting.
This data was produced from actual values sampled on
production lines, and should be used for reference
purposes only.
Since relays are mass-produced, a certain amount of
tolerance is generally allowed in their application.

I/O Block Base G70A 5
■When Mounted to a G3RZ
■When Mounted to a G3R
−30 −20 0 20 40 55 60 80 100
0.4
0.6
0.7
0.8
1
1.2
1.4
0.2
0
G3RZ-201SLN
G3RZ-201SLN
5 10 30 50 100 300 500 1,000 3,000 5,000 10,000
14
12
10
8
6
4
2
0
Load current (A)
Ambient temperature (°C)
Load Current vs. Ambient
Temperature
Inrush Current Resistivity
Inrush current (A. peak)
Energizing time (ms)
Non-repetitive (Keep the inrush current to half the
rated value if it occurs repetitively.)
−30 −20 0 20 4030 55 60 80 100
1
1.5
2
2.5
3
0.5
0.7
0
G3R-ODX02SN
G3R-OA202SZN
G3R-OA202SLN
−30 −20 0 20 40 55 60 80 100
1
1.5
2
2.5
3
0.5
0
G3R-OD201SN
−30 −20 0 20 40 55 60 80 100
1
1.5
2
2.5
3
0.5
0.6
0
G3R-ODX02SN
G3R-OA202SZN
G3R-OA202SLN
G3R-OD201SN
10 30 50 100 200 500 1,000 5,000
10
20
30
02,0001,000500300100503010
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2,0001,000500300100503010
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Load current (A)
Ambient temperature (°C)
16-point mounting
Single mounting
16-point mounting
Single mounting
16-point mounting
Single mounting
Inrush current (A. peak)
Energizing time (ms)
Inrush Current Resistivity
Load current (A)
Ambient temperature (°C) Ambient temperature (°C)
Load current (A)
Non-repetitive (Keep the inrush current to half the
rated value if it occurs repetitively.)
Inrush current (A)
Inrush current (A)
Energizing time (ms) Energizing time (ms)
Load Current vs. Ambient Temperature

6I/O Block Base G70A
Dimensions
Note: All units are in millimeters unless otherwise indicated.
234
75
10.2
9.2 19.6
M3.5
48.7
35.5−8.2
20.7
34.2
54
234
75 35.5−8.2
20.7
34.2
48.7
9.2 19.6
28.6
M3.5
64
G70A-ZOC16 (Output)
G70A-ZIM16 (Input)

I/O Block Base G70A 7
Terminal Arrangement/Internal Connection
G70A-ZOC16-3 (NPN)
G70A-ZOC16-4 (PNP)
(+)* (−)*
Connector Terminal
Arrangement
(Top View) *Recommended DC power supply; eg OMRON S8VS
(+)* (−)*
Connector Terminal
Arrangement
(Top View) *Recommended DC power supply; eg OMRON S8VS

I/O Block Base G70A
G70A-ZIM16-5 (NPN/PNP)
When mounted to a G2R-1-S
Note: The above diagram shows the Unit mounted to a G2R-1-S.
When mounting to a G3R-OA@or G3RZ-201SLN, pins 11 to 14 are output terminals.
When mounting to a G3R-OD@, pin 14 is a plus terminal and pin 11 is a minus terminal. When mounting to
G3RZ-201SLN, there is no polarity.
COM. 1A2 2A2 3A2 4A2 5A2 6A2 7A2 8A2 9A2 10A2 11A2 12A2 13A2 14A2 15A2 16A2
9A1 10A1 11A1 12A1 13A1 14A1 15A1 16A15A1 6A1 7A1 8A11A1 2A1 3A1 4A1
Connector Terminal
Arrangement
(Top View)
+−11 21 31 41 51 61 71 81 91 101 111 121 131 141 151 161
14 24 34 44 54 64 74 84 94 104 114 124 134 144 154 164
12 22 32 42 52 62 72 82 92 102 112 122 132 142 152 162
L1 L2 L3 L4 L5 L6 L7 L8 L9
L10 L11 L12 L13 L14 L15 L16 L17 L18 L19 L20 L21 L22 L23 L24 L25 L26 L27 L28 L29 L30 L31 L32
24 VDC
(Power supply) Recommended Power supply; eg. OMRON S8VS
AC
(DC power also possible)
Independent common also possible
In the interest of product improvement, specifications are subject to change without notice.Cat. No. J087-E1-03
OMRON EUROPE B.V.
Wegalaan 67-69,
NL-2132 JD, Hoofddorp,
The Netherlands
Phone: [phone]
Fax: [phone]
www.eu.omron.com