ix
About this Manual:
This manual describes the installation and operation of the Slice I/O Units and includes the sections
described below. Please read this manual carefully and be sure you understand the information pro-
vided before attempting to install or operate Slice I/O Units. Be sure to read the precautions pro-
vided in the following section.
The following manuals also cover information related to DeviceNet applications in which Slice I/O Ter-
minals are used. Use the DeviceNet Operation Manual together with other required manuals.
Precautions provides general precautions for planning, installing, and operating the Slice I/O Units
and related devices.
Section 1 describes the features of GRT1-series Slice I/O Units and lists the available Units.
Section 2 describes the specifications and functions that are shared by all of the Slice I/O Units.
Section 3 explains how to install and wire the Slice I/O Units.
Section 4 provides the specifications and shows the components, terminal arrangements, wiring dia-
grams, and dimensions for the Digital Slice I/O Units.
Section 5 provides the information required to operate Analog Input Units and Analog Output Units,
including functions, status areas, windows, specifications, wiring, data allocation, and settings.
Section 6 provides the information required to operate the Temperature Input Unit, including functions,
status areas, windows, specifications, wiring, data allocation, and settings.
Manual Contents Cat. No.
SmartSlice GRT1 Series
Slice I/O Units
Operation Manual
(this manual)
Describes the models, specifications, functions, operating proce-
dures, and applications of GRT1-series Slice I/O Units.
W455
DeviceNet Communications Unit
for Slice I/O Terminals
Operation Manual
Describes the specifications, functions, operating procedures, and
applications of the DeviceNet Communications Unit, which allows
Slice I/O Units to be set, controlled, and monitored through
DeviceNet.
W454
DeviceNet
Operation Manual
Describes the configuration and construction of a DeviceNet network,
including installation procedures and specifications for cables, con-
nectors, and other connection devices, as well as information on
functions, operating procedures, and applications.
Read this manual carefully and be sure you understand the informa-
tion provided before attempting to use DeviceNet.
W267
CS/CJ Series
DeviceNet Units
Operation Manual
Describes the specifications, functions, operating procedures, and
applications of CS-series and CJ-series DeviceNet Units. (A CS/CJ-
series DeviceNet Unit can operate as both a DeviceNet Master and
DeviceNet slave at the same time.)
W380
DeviceNet Configurator Ver. 2.@
Operation Manual
Describes the operating procedures of the DeviceNet Configurator.
The DeviceNet Configurator can be used to configure, set, and main-
tain a DeviceNet system through an easy-to-use graphical interface.
Refer to this manual when necessary.
W382
SmartSlice PROFIBUS
Communications Unit
Operation Manual
Describes the specifications, functions, operating procedures, and
applications of the GRT1-PRT PROFIBUS Communications Unit,
which allows Slice I/O Units to be set, controlled, and monitored
through PROFIBUS.
W04E
PROFIBUS Master Units
Operation Manual
Describes the specifications, functions, operating procedures, and
applications of CS-series and CJ-series PROFIBUS Master Units.
W409
CX-Profibus Ver. 1.0
Operation Manual
Describes the operating procedures of CX-Profibus. The CX-Profibus
can be used to configure, set, and maintain a PROFIBUS system
through an easy-to-use graphical interface.
Refer to this manual when necessary.
W05E