Omron MCH User manual

293MCH-Tool
Software
Programming Software for Mechatrolink-II Motion Controllers
MCH-Tool
Functions
Operating Enviroment
Compatible Units
Software
Specifications
System setting Setting communication parameters
Data input
- Editing of system parameters
- Programming in BASIC type Motion Control language
- Load, save, delete parameter files, etc.
- Imports CAM tables
Test options/Online operation - Transfer Motion Controller unit data
- On-line monitor
- Transfer of Servo Drives parameter data
Operating systems Windows 2000/NT
Processor Pentium class at 300 Mhz or higher
Memory requirements Hard disk 100 MB free memory space
RAM 64 MB min.
Screen 800x600 resolution or higher
Peripheral connections CD-ROM drive, serial port
Specification
Motion Controllers CS1W-MCH71
Ordering Information
Description Model
MCH-MIel MOTION TOOLS CD
Programming tool for Programming the Motion
Cotrol Unit, and configuring all Drives connected to
the MECHATROLINK-II motion link
• Acccess to all system programming, configuration and
monitoring from one connecting point.
• Complete configuration of the MCH and the servo drives
• Programming in Basic type Motion
Control language
• On-line Monitoring
• Imports CAM tables
Y203-EN2-01.book Seite 293 Montag, 29. März 2004 12:52 12

294 Programming Software for Mechatrolink-II Motion Controllers
In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. I29E-EN-01
Y203-EN2-01.book Seite 294 Montag, 29. März 2004 12:52 12