on stage Deluxe Keyboard Tier KSA8500 User manual

Deluxe Keyboard Tier
KSA8500
©2018 The Music People On-Stage.com
Note: If using a Z stand, remove plastic end
caps from Z stand. Drill hole in stand to secure
Z stand adapters with screw.
1. Remove plastic end caps from back of
keyboard stand, and adjust width of KSA8500 to
t peg inserts into back of keyboard stand.
Contents in box:
• Deluxe Keyboard Tier
• Z stand adapters
2. Insert KSA8500 into back of keyboard stand
and tighten round knobs behind the inserts to
secure KSA8500.
3. Adjust position of arms horizontally using
small cat’s eye knobs on back and bottom of
lower arm brackets.
Z stand adapters
Deluxe Keyboard Tier

4. Adjust the angle of each arm with
the posi-lok knob adjustment.
6. Adjust height of arms using knob
adjustment.
5. Adjust depth of arms using small knob
adjustment on the side of the arm bracket.
7. Make sure all knobs are fully tightened before
placing any gear on the KSA8500. Finished
product should look like the gure below.
Note: Outer arms can be moved to the inner
portion of the stand if dissasembled
©2018 The Music People On-Stage.com