on2 PETS 2 FT. INTERCHANGEABLE LEAF BRANCHES CAT TREE User manual

For inquiries or assistance, please contact us at [email protected].
@On2Pets
2 FT. INTERCHANGEABLE
LEAF BRANCHES CAT TREE
MADE IN THE USA

PARTS
Cap for Leaves (x8) Leaf Branch (x8)
A1 B1
D1
B2
E1
A2
Large Rod (x1) Square Base (x1) Base Trunk (x1) Leveling Glide (x4)
STEP 1
1.1 1.2 1.3
Insert Leveling Glides (A2)
into Base (B1). Adjust to
ensure Base (B1) is stable
and level.
Screw Large Rod (A1)
into Base (B1) until tight.
Place Base Trunk (B2)
on top of Base (B1). Make
sure the small wood
gasket ts inside trunk.
Place Perch (C2)
over Base Trunk (B2).
Rotate Perch (C2)
clockwise until tight.
A1
B2 C2
A2
B1
B1
B2
C2
Perch (x1)
Disclaimer: Some items may not be drawn to scale

STEP 2
2.1 2.2
Insert each Cap (D1)
into the slots from
underneath Perch (C2)
with open end facing up.
Push Branch (E1) into Cap
(D1). Press down rmly
to secure branch.
Change branch colors easily
and customize to your liking.
NOTE: Additional leaf sets
are sold separately and come
with their own cap system.
D1 E1

Love your cat furniture? Share a review on On2Pets.com.
PLEASE BE REMINDED: Product not intended for the use of children. Be aware some components may be
swallowed. If such event occurs, stop use of the product immediately and check our return and warranty policies.
This product is protected by the following USPTO codes: D668,006 / D700,754 / 8,695,533B1 / D688,002