on2 PETS 5 FT. INTERCHANGEABLE LEAF BRANCHES CAT TREE User manual

ROUND BASE SQUARE BASE
For inquiries or assistance, please contact us at [email protected].
5 FT. INTERCHANGEABLE
LEAF BRANCHES CAT TREE
@On2Pets
MADE IN THE USA

PARTS
Cap for Leaves (x24) Leaf Branch (x24)
A1
B1
D1
B2
E1
B3 C1, C2, C3
A2 A3 A4 A5
Large Rod (x1)
Round or Square Base (x1) Base Trunk (x1) Middle & Top
Trunks (x2)
C1 - Large Perch (x1)
C2 - Medium Perch (x1)
C3 - Small Perch (x1)
Medium Rod (x1) Small Rod (x1) Leveling Glide (x4) Connector (x2)
STEP 1
1.1 1.2 1.3
Insert Leveling Glides (A4)
into Base (B1). Adjust to
ensure Base (B1) is stable
and level.
Screw Large Rod (A1)
into Base (B1) until tight.
Place Base Trunk (B2)
on top of Base (B1). Make
sure the small wood
gasket ts inside trunk.
Place Large Perch (C1)
over Base Trunk (B2).
Rotate Large Perch (C1)
clockwise until tight.
A1
B2 C1
A4
B1
B1
B2
Disclaimer: Some items may not be drawn to scale

STEP 3
STEP 2
2.1 2.2 2.3
Screw Connector (A5)
half way into the remaining
part of Large Rod (A1).
NOTE: Hold Connector (A5)
steady while rotating Rod.
Screw Medium Rod (A2)
onto remaining half of
Connector (A5) until tight.
Place Middle Trunk (B3)
on top of Perch (C1). Make
sure the small wood gasket
ts inside trunk.
B3
A5
A2
A5
C1
3.1 3.2
Place Medium Perch (C2)
over Middle Trunk (B3).
Rotate Medium Perch (C2)
clockwise until tight.
Screw Connector (A5)
half way onto remaining
part of Medium Rod (A2).
C2
A5
A3
B3
A5
A2
NOTE: Hold Connector (A5)
steady while rotating rod.
3.3
Screw Small Rod (A3) into
the remaining half of
Connector (A5) until tight.

Love your cat furniture? Share a review on On2Pets.com.
PLEASE BE REMINDED: Product not intended for the use of children. Be aware some components may be
swallowed. If such event occurs, stop use of the product immediately and check our return and warranty policies.
This product is protected by the following USPTO codes: D668,006 / D700,754 / 8,695,533B1 / D688,002
STEP 4
4 .1 4.2 4.3
Place Top Trunk (B3)
on top of Medium Perch (C2).
Make sure the small wood
gasket ts inside trunk.
Place Small Perch (C3)
over Top Trunk (B3). Rotate
Small Perch (C3) clockwise
until tight.
Rearrange perches
so your cat is able
to climb easily.
STEP 5
5.1 5.2
Insert each Cap (D1) into
the slots from underneath
on all three perches with
open end facing up.
Push Branch (E1) into
Cap (D1). Press down
rmly to secure branch.
Change branch colors easily
and customize to your liking.
NOTE: Additional leaf sets
are sold separately and come
with their own cap system.
B3
B3
C2
C3
NOTE: If Small Rod (A3) does not reach the Top Small Perch (C3), unscrew Small Rod (A3)
until it screws into Top Perch (C3).
D1
E1
D1