One Forall URC-9966 User manual

8-Device
Universal Remote Control
With IR/RF Base Station
Télécommande universelle
à 8 composants
avec station de base IR/RF
URC-9966
User’s Guide
Guide d'utilisation
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 1 Friday, May 6, 2005 8:03 PM

KAMELEON 8-DEVICE REMOTE WITH RF
2Table of Contents
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Installing Batteries . . . . . . . . . . . . . . . . . . . . . .4
How Kameleon™ Works. . . . . . . . . . . . . . . . . .5
How Kameleon™ Works. . . . . . . . . . . . . . . . . .5
Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . .7
Device Table . . . . . . . . . . . . . . . . . . . . . . .12
Adjusting The Display . . . . . . . . . . . . . . . . . . .13
Adjusting Brightness . . . . . . . . . . . . . . . . .13
Adjusting How Long The Screen Light
is On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Setting the Vibration Switch . . . . . . . . . . .15
Programming Device Control. . . . . . . . . . . . .15
Programming Combo Device Control. . . . . . .18
Searching For Your Code . . . . . . . . . . . . . . . .19
Checking The Codes . . . . . . . . . . . . . . . . . . . .20
Using The Home Theater Mode. . . . . . . . . . . .22
Control Organization . . . . . . . . . . . . . . . . .22
Factory Default Settings . . . . . . . . . . . . . .22
Programming The Home Theater
Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Using the IR/RF Base Station . . . . . . . . . . . . .24
Setting Up the IR/RF Base Station . . . . . .25
Adding the IR Signal Extension Cord. . . . .26
Optimizing IR/RF Base Station
Reception . . . . . . . . . . . . . . . . . . . . . . . . .27
Changing Volume Lock . . . . . . . . . . . . . . . . . .27
Locking Volume Control to One Mode
(Global Volume Lock) . . . . . . . . . . . . . . . .27
Unlocking Volume Control For A Single
Device (Individual Volume Unlock). . . . . .28
Unlocking All Volume Control
(Restoring Default Setting) . . . . . . . . . . . .29
Using Macros . . . . . . . . . . . . . . . . . . . . . . . . .29
Programming a Favorite Channel
Macro. . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Programming a Master Power Macro in the
Home Theater Mode . . . . . . . . . . . . . . . . .31
Clearing a Macro. . . . . . . . . . . . . . . . . . . .32
Using Learning . . . . . . . . . . . . . . . . . . . . . . . .32
Learning Precautions . . . . . . . . . . . . . . . .32
Programming a Learning Key . . . . . . . . . .33
Deleting a Single Learning Key . . . . . . . . .34
Deleting All Learned Keys in a Specific
Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Reassigning Device Keys . . . . . . . . . . . . . . . .36
Using Keymover . . . . . . . . . . . . . . . . . . . . . . .36
Programming Keymover . . . . . . . . . . . . . .37
Restoring a Single Keymoved Key. . . . . . .38
Restoring All Keymoved Keys in a
Single Mode . . . . . . . . . . . . . . . . . . . . . . . 38
Using Channel Scan. . . . . . . . . . . . . . . . . . . . 39
Programming Favorite Channel Scan. . . . . . 39
Restoring Factory Default Settings . . . . . . . 40
Clearing All Custom Programming . . . . . . . . 41
About Upgrading . . . . . . . . . . . . . . . . . . . . . . 42
Upgrade Procedure . . . . . . . . . . . . . . . . . 43
Upgrade Exclusions . . . . . . . . . . . . . . . . . 43
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . 44
Device Menu Screens . . . . . . . . . . . . . . . . . . 46
Customer Support . . . . . . . . . . . . . . . . . . . . . 55
Compliance with FCC Rules and
Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Limited Warranty. . . . . . . . . . . . . . . . . . . . . . 55
Battery Use And Safety . . . . . . . . . . . . . . . . . 56
About Battery Life . . . . . . . . . . . . . . . . . . . . . 57
Specifications . . . . . . . . . . . . . . . . . . . . . . . . 57
Additional Information . . . . . . . . . . . . . . . . . 58
Table Des Matières . . . . . . . . . . . . . . . . . . . . 59
Manufacturer’s Codes. . . . . . . . . . . . . . . . . 129
Setup Codes for Audio Amplifiers . . . . . 129
Setup Codes for Audio Receivers . . . . . 129
Setup Codes for Cable Boxes . . . . . . . . 130
Setup Codes for CD Players. . . . . . . . . . 130
Setup Codes for DVD Players. . . . . . . . . 131
Setup Codes for DVD Player/PVR
Combos . . . . . . . . . . . . . . . . . . . . . . . . . 132
Setup Codes for DVD Player/VCR
Combos . . . . . . . . . . . . . . . . . . . . . . . . . 132
Setup Codes for Home Automation . . . . 132
Setup Codes for Home-Theater-in-a-Box
Systems . . . . . . . . . . . . . . . . . . . . . . . . . 132
Setup Codes for Mini-Disc Players . . . . 133
Setup Codes for PVRs . . . . . . . . . . . . . . 133
Setup Codes for Satellite Receivers . . . 133
Setup Codes for Satellite Receivers/PVR
Combos . . . . . . . . . . . . . . . . . . . . . . . . . 134
Setup Codes for TVs. . . . . . . . . . . . . . . . 134
Setup Codes for TV/DVD Player
Combos . . . . . . . . . . . . . . . . . . . . . . . . . 136
Setup Codes for TV/VCR Combos. . . . . . 137
Setup Codes for TV/VCR/DVD Player
Combos . . . . . . . . . . . . . . . . . . . . . . . . . 137
Setup Codes for VCRs . . . . . . . . . . . . . . 137
Setup Codes for Video Accessories. . . . 139
Setup Codes for Cable/DVR Combos . . . 139
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 2 Friday, May 6, 2005 8:03 PM

USER’SGUIDE
Introduction 3
INTRODUCTION
T he OFA Kameleon™ 8-Device Remote with RF (URC-9966) is a revolutionary
universal remote control that uses Universal Electronics’ Kameleon Technology.
Moreover, it allows you to consolidate the clutter of all of your original remote
controls into one easy-to-use product.Advanced features include
:
•Kameleon Technology – dynamic menu screens that respond to device
selection and illuminate only active keys
•Home Theater Mode – a custom mode that groups the most-often-
used keys together for operating convenience in one mode
•Macros – for instant activation of favorite key sequences
•Learning – to capture unique functions from your devices’ original
remote controls
•Key Mover – for copying keys from one device to another, or to a
different position in the same mode
•Direct Code Setup – for easy device programming with setup codes
•Innovative Code Search – allows setup ofyour devices without looking
up codes
• IR/RF Base station–for extended remote control signal range
•Favorite Channel Scan – for easy channel surfing of favorite channels
•Vo l u me L o c k – to assign volume controls to individual devices or to
one global device
•Extensive Code Library – largest and most efficient group of IR
remote control codes for virtually every current brand and make
•Upgradeability – our unique telephone upgrade system ensures your
remote control always has the latest setup codes when adding new
devices in the future
After installing four (4) new AAA alkaline batteries (not included, see next
page), you can immediately use the unit to control a Motorola Cable Box, a
Toshiba DVD Player, a Philips Tivo PVR (DVR), a Pioneer CD Player and
Audio Receiver, and a RCA TV,VCR, and Satellite Receiver. To control other
brands than the default ones, see “Programming Device Control” on page 15.
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 3 Friday, May 6, 2005 8:03 PM

KAMELEON 8-DEVICE REMOTE WITH RF
4Installing Batteries
INSTALLING BATTERIES
1. On the remote control’s back, push the tab and lift off the battery cover.
2. Obtain four (4) new AAA alkaline batteries. Match the + and – marks
on the batteries to the + and – marks in the battery case, then insert the
new batteries.
3. Press the battery cover back into place. The tab should click when the
cover is locked.
4. Once the batteries are inserted correctly, press anywhere in the middle part
of the screen. The display will turn on and show all keys. If a key is not
pressed after the display turns on, the display will turn off. The display can
be turned on by moving the unit or by pressing on the center of the screen.
❶
❸
❷
NOTE: The two bottom segments of
the IR indicator flash when the
batteries are running low. The
batteries need replacement if one of
the following conditions occurs:
• Pressing any key turns on all
keys and icons.
• The vibration switch no longer
activates the display (if the
vibration switch feature is still
enabled).
• Pressing a key while the screen
is off causes all of the keys and
icons to turn on.
See “Battery Use And Safety” on
page 56 for additional information.
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 4 Friday, May 6, 2005 8:03 PM

USER’SGUIDE
How Kameleon™ Works 5
HOW KAMELEON™ WORKS
Kameleon™ allows wireless controllers to dynamically change their
appearance and functionality, to match the home entertainment
environment.Moreover, this technology provides unparalleled ease-of-use
and superior control by delivering a uniquely intuitive, graphical interface
that intelligently illuminates only the active keys.
The OFA Kameleon 8-Device Remote with RF uses Kameleon technology to
provide the versatility of an LCD remote control with the feel of a traditional
push button unit. The result is a stunning, bright display with engaging
animation and touch-sensitive graphics for the user.
The remote control includes convenient Menu Driven programming.The
displays are divided into two types of interactive screens: Device Menus for
normal remote control use, and Programming Menus for feature
setup.Acting like its namesake, Kameleon changes the Device Menu for the
device being selected. For example, selecting TV displays a main menu that
contains channel selection, volume control, and a keypad.However, selecting
a DVD player still displays a menu with those same keys as the TV, but now
navigation keys and transport controls are added for the DVD device.
Several devices have additional menus that can be accessed using SCROLL
(see “Device Menu Screens” starting on on page 46. For example, TV has
three menus: a main menu with keys for a general purpose TV, a second
menu screen that adds navigation keys and removes FORMAT, INPUT and
ENTER keys, and a third menu screen that adds INPUT, ENTER, and PIP keys.
Depending on desired features, a user has the flexibility to use any menu
screen that works best for the selected device.
NOTE: The CD, DVD, and PVR modes do not have additional menu
screens even though SCROLL is displayed.
Animated key graphics also provided enhanced operational feedback, so the
user can easily see what mode is active and when the commands are
communicating with a device. The end result of Kameleon technology is a
simple, elegant, and intelligent way of organizing a large number of remote
control keys for eight different devices in a relatively small case.
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 5 Friday, May 6, 2005 8:03 PM

KAMELEON 8-DEVICE REMOTE WITH RF
6Features And Functions
FEATURES AND FUNCTIONS
Use the illustration to the right to locate
features on the OFA Kameleon 8-Device
Remote with RF (URC-9960) and then refer
to the “Key Charts” (starting on page 7) to
learn how they function.
NOTE: The illustration shows all remote
control keys. In actual operation, only
active keys used by the selected device are
displayed and non-active keys are hidden.
To find out what type of devices can be
controlled by each device key after
programming, see the “Device Table” on
page 12.
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 6 Friday, May 6, 2005 8:03 PM

USER’SGUIDE
Features And Functions 7
KEY CHARTS
When a key is pressed, the IR Segments animate.
Outgoing animation (see arrows) indicates the remote
control is sending IR signals to a selected device.
Incoming animation (see arrows) indicates the remote
control is receiving IR signals from a device being
learned (see “Using Learning” on page 32)
Press a Device Key once to select a home
entertainment device to control (e.g., DVD).When
selected, the Device Key animates to indicate it is
currently active.Also see the “Device Table” on
page 12.
After programming, press the Home Theater key once
to select the home theater mode (see ““Using The
Home Theater Mode” on page 22).
Press POWER once to turn on or off a selected device.
During programming, the HOME key appears. Use it to
exit the program screen or to return to the last-
selected device key screen.
In the AUX, CBL/SAT, and TV modes, use FAV to scan
through all channels, or after programming, to scan
through 10 favorite channels.
In the AUX, CBL/SAT, TV, AUDIO, and VCR modes, use
SCROLL to view additional key screens for the selected
device.
Use VOL S(or VOL T) to raise (or lower) the sound
volume for the selected device (also see “Changing
Volume Lock” on page 27).
Press MUTE once to turn the sound off or on.
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 7 Friday, May 6, 2005 8:03 PM

KAMELEON 8-DEVICE REMOTE WITH RF
8Features And Functions
In the AUX and CBL/SAT modes, use PVR/VOD to access
PVR/VOD programs (if available on your cable or
satellite service).
In the AUDIO mode, use PRESET to access preset
stations on your audio device.
In the TV mode, use FORMAT to change the aspect ratio
or zoom (if feature is available on your TV).
In the DVD or PVR mode, press REPLAY once to replay a
DVD chapter or a recorded program on your PVR (or
DVR).
In the CBL/SAT and AUX modes, press SCROLL once to
display REPLAY and then press REPLAY once to replay a
VOD program (if available on your cable or satellite
service).
Use CH S(or CH T) to select the next higher (or
lower) channel.
In all modes except CD, DVD, and PVR, press LAST once
to recall the last channel.
In the PVR mode, use LAST to select live or recorded
video.
In the CD or DVD modes, press RAND to play random
tracks or chapters.
In the AUX and CBL/SAT modes, use PAGE+ or PAGE–
to page up or down through channels in the program
guide.
In the DVD mode, press AUDIO once to access DVD
audio formats (if available).
In all modes except AUDIO, use GUIDE to display your
selected device’s program guide or setup menu.
In the AUDIO mode, use DSP to access DSP features (if
available) on your audio device.
Use INFO to display the current channel and program
information.
or
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 8 Friday, May 6, 2005 8:03 PM

USER’SGUIDE
Features And Functions 9
In the AUX, CBL/SAT, CD, DVD, and PVR modes, use the
Cursor Keys to move the cursor in the program guide
and menu screens.
Use OK to choose options from your selected device’s
menu or guide.
In the TV or VCR mode, press SCROLL once to access
the Cursor and OK Keys.
In the AUDIO mode, press SCROLL twice to access the
Cursor and OK Keys.
In the AUDIO mode, use the Cursor Keys to move the
cursor to select or test surround sound channels on
your audio device.Also see VOL keys (above left).
Use OK to choose options from your audio device’s
menu or guide.
Press MENU once to display your selected device’s main
menu.
Use EXIT to exit from your selected device’s guide or
menu.
In the DVD or AUDIO mode, press SUBTITLE once to
display (or turn off) subtitles, if available on your DVD
or audio device.
In all modes except AUDIO, use the Number Keys (1– 9
and 0) to directly select channels (e.g., 009 or 031) or
enter numbers. In the AUDIO mode, use the Number
Keys to directly select inputs 1– 9and 10. To enter
channels in the AUDIO mode, press SCROLL three times
to view channel Number Keys (see above)
Use INPUT to change the input source for a selected
device.
For certain brands in all modes except CD and AUDIO,
press ENTER once after entering numbers (if required
on your original remote control).
or
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 9 Friday, May 6, 2005 8:03 PM

KAMELEON 8-DEVICE REMOTE WITH RF
10 Features And Functions
For CD or AUDIO modes, press SKIP once to skip to the
next track on your audio device.
After programming, press Macro Key 1 – 4once to run
a macro (see “Using Macros” on page 29).
In the CD, DVD, AUDIO, and VCR modes, use the
Transport Keys to control the device’s transport.
In the PVR mode, use the LIVE Transport Keys to
control PVR/DVR video.
In the CBL/SAT or AUX mode, press SCROLL once to
display and use the LIVE Transport Keys to control
VOD (Video On Demand) if available on your cable/
satellite service.
In all modes except TV, press l twice to record a
program on your device (if function is available).
In the TV mode, press PIP once (or press SCROLL
twice) to display the PIP Keys.Use them to control the
following Picture-In-Picture features (if available) on
your TV:
Use PIP to switch the Picture-In-Picture feature on or
off.
Use SWAP to switch images and sound between the
main and window pictures.
Use SIZE to select a different picture window size.
Press FREEZE once to capture a frame of video in the
main picture. Press it again to resume normal viewing.
Use MOVE to move the window picture to different
places in the main picture.
Use SETUP to enable the programming screen.
or
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 10 Friday, May 6, 2005 8:03 PM

USER’SGUIDE
Features And Functions 11
In the program mode, use the Program Keys to
personalize the remote control as follows:
Use DEV SET to program your device codes.See
“Programming Device Control” on page 15.
Use SEARCH as an alternate way to set up a device by
searching available codes. See “Searching For Your
Code” on page 19.
Use THEATER to create a custom mode with favorite
remote control keys from different devices in your
home theater system.See “Using The Home Theater
Mode” on page 22.
Use VOL (Volume Lock) to set volume controls for
individual or global device use. See “Changing Volume
Lock” on page 27.
Use MACRO to program a series of commands on five
available macro keys. See “Using Macros” on page 29.
Use (Brightness) to adjust the brightness level of
the EL display. See ““Adjusting Brightness” on page 13.
Use IR LRN and IR DEL to add and delete key functions
learned from your original device remote controls.See
“Using Learning” on page 32.
Use MODE to reassign an unused device key to
control a second device.See “Reassigning Device Keys”
on page 36.
Use OTHER to program other functions. See the “Table
of Contents” on page 2 for sections on Checking The
Codes, Programming Favorite Channel Scan, Using
Keymover, or Upgrading.
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 11 Friday, May 6, 2005 8:03 PM

KAMELEON 8-DEVICE REMOTE WITH RF
12 Features And Functions
DEVICE TABLE
NOTE: Please refer to the table below when performing the instructions in
“Programming Device Control” on page 15.
After programming, the OFA Kameleon 8-Device Remote with RF will be
able to control the following types of devices:
Note: When programming a code, make sure that the correct mode key is
selected, and that a valid code is programmed for that device (see above).
DEVICE KEY CONTROLS THESE DEVICES
Video Accessory or second device (e.g., Cable Box, Satellite
Receiver, DVD Player, etc.) by reassigning device keys (see
“Reassigning Device Keys” on page 36)
Cable Box (converter), Cable/DVR Combo, Satellite receiver,
Satellite/PVR Combo
CD Player, Mini Disc player or Home Automation
Television (including HDTV, Plasma and LCD), TV/DVD
Combo (listed as TV Codes), TV/VCR Combo (listed as TV
Codes).
DVD players, Home-Theater-In-A-Box devices (listed as
DVD codes), TV/DVD Player Combo, TV/DVD/VCR Player
Combo, DVD/VCR Player Combo (listed as DVD Codes) or
DVD/PVR Combo
Audio Amplifier, Audio Receiver or Home-Theater-In-A-
Box devices (listed as Receiver codes)
VCR, TV/VCR Combo (listed as VCR Codes) or VCR/DVD
Combo (listed as VCR Codes)
PVR
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 12 Friday, May 6, 2005 8:03 PM

USER’SGUIDE
Adjusting The Display 13
ADJUSTING THE DISPLAY
Your new remote has several ways to adjust the display for your comfort and
best use.
ADJUSTING BRIGHTNESS
The OFA Kameleon 8-Device Remote with RF has five levels of brightness
adjustment and is set to the middle one at the factory. To increase or decrease
the brightness, perform the following steps:
NOTE: Increasing the brightness of the display can decrease battery life.
1. Press and hold SETUP until the two bottom IR segments flash twice. The
Program Keys appear.
2. Press (Brightness) once.The Brightness programming screen
appears:
NOTE: . If the display turns off because of
inactivity, you must start the programming
sequence again by repeating this step.
• To increase brightness, press S
one or more times.
• To decrease brightness, press T
one or more times.
3. When the desired brightness is
achieved, press HOME twice to exit
programming and return to the last-
selected device menu screen.
NOTE: Otherwise, to program other features,
press HOME only once to return to the
Program Keys.
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 13 Friday, May 6, 2005 8:03 PM

KAMELEON 8-DEVICE REMOTE WITH RF
14 Adjusting The Display
ADJUSTING HOW LONG THE SCREEN LIGHT IS ON
The OFA Kameleon 8-Device Remote with RF allows you to control how long
the screen light remains on after the last button is pressed. The display-on
time is set at the factory to run for about 8 seconds. To increase or decrease
that time, perform the following steps:
NOTE: Increasing the display on time can decrease battery life.
1. Press and hold SETUP until the two bottom IR segments flash twice. The
Program Keys appear.
2. Press OTHER once.The Other programming screen appears:
5. Press HOME twice to exit programming and return to the last-selected
device menu screen.
NOTE: . If the display turns off because of
inactivity, you must start the programming
sequence again by repeating this step
.
3. Using the Number Keys, enter 9 7
8.The bottom two IR segments flash
twice and display the Other screen
again.
4. Use the following table to choose the
“light on” time:
Press… …to set the light for
14seconds
28seconds
3 12 seconds
4 16 seconds
5 20 seconds
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 14 Friday, May 6, 2005 8:03 PM

USER’SGUIDE
Programming Device Control 15
SETTING THE VIBRATION SWITCH
The OFA Kameleon 8-Device Remote with RF is set at the factory to turn the
display on when you pick it up, before you even press a button (the vibration
switch is on). To turn vibration off, perform the following steps.
1. Press and hold SETUP until the two bottom IR segments flash twice. The
Program Keys appear.
2. Press OTHER once.The Other programming screen appears:
PROGRAMMING DEVICE CONTROL
The OFA Kameleon 8-Device Remote with RF is preset at the factory to
operate the following devices:
NOTE: Turning off the vibration switch can
significantly extend battery life.
NOTE: If the display turns off because of
inactivity, you must start the programming
sequence again by repeating this step.
3. Using the Number Keys, enter 9 8 5.
The bottom two IR segments flash four
times, to indicate vibration switch has
been turned off.
4. Press HOME twice to exit programming
and return to the last-selected device
menu screen.
To turn vibration switch back on, repeat
steps 1 to 4 above. Note that the bottom two
IR segments flash twice (in step 3), to
indicate that the vibration switch is back on.
•MotorolaCableBox(using
the AUX key)
•PhilipsTivoPVR(DVR)
• Pioneer CD Player and Audio
Receiver
• RCA TV,VCR, and Satellite
Receiver
•ToshibaDVDPlayer
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 15 Friday, May 6, 2005 8:03 PM

KAMELEON 8-DEVICE REMOTE WITH RF
16 Programming Device Control
To control devices other than the default brands, perform the following steps;
otherwise skip this section.
NOTE: . To control a Combo device, perform the instructions in “Programming
Combo Device Control” on page 18.
1. Turn on a device (e.g.,VCR or DVD player) and, if applicable, insert
media (e.g., cassette or disc).
NOTE: Read steps 2 through 9 completely before proceeding. Before
starting step 2, review the “Manufacturer’s Codes” (starting on page 129).
Brands are listed alphabetically in order of most popular ones first.
Highlight or write down the devices and the codes you wish to program.
2. Press and hold SETUP until the two bottom IR segments flash twice. The
Program Keys appear as SETUP flashes repeatedly
3. Press DEV SET once. The Device Setup programming screen appears:
NOTE: . If the display turns off due to
inactivity, the remote control exits
programming and return to the last-selected
device menu screen. To start programming
again, repeat this step. To stop programming at
any time, press HOME once to return to the
Program Keys screen. Press HOME once more
to exit completely.
4. Press a device key once (i.e., AUX, CBL/
SAT, CD, TV, DVD, AUDIO, VCR, or PVR).
The selected device key animates.
NOTE: Refer to the “Device Table” on
page 12 when choosing a device key for
programming.
5. Use the “Manufacturer’s Codes”
(starting on page 129) to locate the type
of device and brand name and then use
the Number Keys to enter the first code
for your device. The bottom two IR
segments flash twice.
NOTE: If the bottom two IR segments
displayed one long flash, a mistake has
occurred. Try entering the code again.
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 16 Friday, May 6, 2005 8:03 PM

USER’SGUIDE
Programming Device Control 17
6. Aim the remote control at the device and press POWER once.The device
should turn off. If it does not, repeat steps 5 and 6, trying each code for
your brand until you find one that works. If it still doesn’t work, try
“Searching For Your Code” on page 19.
NOTE: If the device does not have a POWER key, press the X(Play) key.
7. If the code works, press OK once.The two bottom IR segments display
one long flash.
8. If necessary, repeat steps 4 through 7 for each device you want to
control. Iffinished, press HOME twice to exit programming and return to
the last-selected device menu screen.
9. For future reference, write down each working device code in the
following boxes:
AUX Code:
Device Type:______________________________________
CBL/SAT Code
:
Device Type:______________________________________
CD Code
:
Device Type:______________________________________
DVD Code
:
Device Type:______________________________________
TV Code:
AUDIO Code
:
Device Type:______________________________________
VCR Code:
Device Type:______________________________________
PVR Code:
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 17 Friday, May 6, 2005 8:03 PM

KAMELEON 8-DEVICE REMOTE WITH RF
18 Programming Combo Device Control
PROGRAMMING COMBO DEVICE CONTROL
You can set the OFA Kameleon 8-Device Remote with RF to control your
combo devices such as TV/VCR, TV/DVD, Satellite/DVR, Home-Theater-In-
A-Box, and many others. For a complete list of combo devices, refer to the
“Device Table” on page 12. To program a DVD Player/VCR combo, follow the
steps below.
NOTE: Some combo device types have codes that you can program on separate
device keys. For example, you can program DVD Player/VCR Combo codes
under the VCR or DVD mode keys. Refer to the Setup Codes for DVD Player/
VCR Combos section. You only need to program one code to control your combo
device.
1. Turn on the DVD Player/VCR Combo and insert a DVD.
NOTE: Please read steps 2 through 8 completely before proceeding. Before
starting step 2, review the “Setup Codes For DVD Player/VCR Combos”
(on page 132). Brands are grouped by VCR codes or DVD codes, and are
listed alphabetically in order of most popular ones first. Highlight or write
down the devices and the codes you wish to program.
2. Press and hold SETUP until the two bottom IR segments flash twice. The
Program Keys appear as SETUP flashes repeatedly.
NOTE: . If the display turns off due to
inactivity, the remote control exits
programming and return to the last-selected
device menu screen. To start programming
again, repeat this step. To stop programming at
any time, press HOME once to return to the
Program Keys screen. Press HOME once more
to exit completely.
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 18 Friday, May 6, 2005 8:03 PM

USER’SGUIDE
Searching For Your Code 19
3. Press DEV SET once.The Device Setup programming screen appears:
7. If the code works, Press OK once. The two bottom IR segments will flash
twice.
8. To exit programming, press HOME twice. The display returns to the last-
selected device menu screen.
SEARCHING FOR YOUR CODE
If your device does not respond after trying all codes listed for your brand, or
if your brand is not listed at all, try searching for your code. For example, to
search for a code for your TV:.
4. Press DVD once (or VCR if your combo
device uses a VCR Code). The key will
animate.
5. Use the “Setup Codes For DVD Player/
VCR Combos” (on page 132) to locate
the brand name and then use the
Number Keys to enter the first code for
your device. If performed correctly,
the two bottom IR segments flash
twice.
NOTE: If the two bottom IR segments
displayed one long flash instead, an
error has occurred. Try entering the
same code again.
6. Aim the remote control at the device
and press POWER once. The device
should turn off.
NOTE: Before performing a code search for a CD or
DVD player or a VCR, turn on the device and insert
the required media
1. Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys appear
as SETUP flashes repeatedly.
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 19 Friday, May 6, 2005 8:03 PM

KAMELEON 8-DEVICE REMOTE WITH RF
20 Checking The Codes
2. Press SEARCH once.The Search Codes programming screen appears:
NOTE: If your device or its original remote control does not have a Power key,
select a different test function in this step (e.g., CH+, VOL+, Play, etc.).
5. Aim the remote control at the device (e.g., TV) and press Sone or more
times. Stop when a working code performs the test function selected in
step 4. If desired, use Tto try a previous code.
NOTE: In the search mode, the remote control sends IR codes from its
library to the selected device, starting with the most popular code first.
6. T
o lock the code, press OK once.The two bottom IR segments flash twice .
7. To search for codes of your other devices, repeat steps 3 to 6.
8. To exit programming, press HOME twice. The display returns to the last-
selected device menu screen.
CHECKING THE CODES
If you have set up the remote control using the Searching For Your Code
procedure (on the left), you may need to find out which code is operating
your equipment. For example, to find out which code is operating your TV:
3. Press a device key once (e.g., TV). The
selected device key animates.The
device’s Main Menu screen appears
with the HOME key still displayed.
4. Press POWER once to select it as the
search test function.The Search
Programming screen appears again.
NOTE: With POWER as the search test
function, a “Power On” IR command is
sent to the device each time a test code is
sent.As a confirmation, the IR segments
display an outgoing animation.
1. Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys
appear as SETUP flashes repeatedly.
OFA Kameleon wRF UG rev 3 Fr-En.fm Page 20 Friday, May 6, 2005 8:03 PM