ONE CoyoteM User manual

OWNER’S MANUAL
ver 2023.01.03E
Manual Wheelchair

Foot
Plate
Padded
Armrest
Hand Grip
Wheel
Locks
24” Pneumatic
Rear Wheel
Back
Upholstery
Seat Rail
8” Caster
2
MOWNER’S MANUAL
Manual Wheelchair

3
MOWNER’S MANUAL
1. Construction
• Desk flip up armrest
• Detachable legrest
• 22’’ & 24’’ seat width
• Load capacity is 120 kg.
• Nylon seat and back
2. Usage
2.1 Unfolding
Hold the handles with both hands to
separate the frame slightly. Push
down both sides of the seat
upholstery lightly by hand until
completely unfolded. (Figure 3)
Note: when unfolding, do not force
the frame too hard to avoid
damage. Don’t wrap your fingers
around the seat tubes to avoid
injury when pushing down the seat
upholstery.
2.2 Folding
First turn over both the footplates.
Next, lift up on the front and back of
the seat upholstery lightly with
hands until folded. (Figure 4)
2.3 Adjust the footplate
First loosen the locknut with the
spanner, pull down the slide tube
and adjust the footplate to a
proper position, and then lock and
fix the bolts with the spanner in a
clockwise direction. (Figure 5)
Figure 3
Figure 4
Figure 5
Manual Wheelchair

4
MOWNER’S MANUAL
2.4 Self-propelling
While sitting in the chair, hold the
hand rims with both hands. At the
same time, push the hand rims
forward with equal force with both
hands to make it move forward,
and immediate release your grip on
the hand rims. Repeat this process
until you’ve reached the desired
distance. (Figure 6)
Figure 6
2.5 Using the brakes
While stopped, the brake handles
forward until they lock into place.
This prevents the rear wheels from
moving. Pull the brake handles
back to unlock the rear wheels.
(Figure 7)
2.6 Overcoming obstacles while
pushing someone
Too get over small obstacles like low
curbs or changes in terrain, the
attendant pushing the chair should
begin by stepping on the pedal at
the end of the frame tubes while
holding the push handles with both
hands. This will allow the attendant
to lean the wheelchair back to lift
the front castor. Once the front
castor is over the obstacle, the rear
wheels can be pushed over the
obstacle as well. (Figure 8)
Figure 7
Figure 8
Manual Wheelchair

2.7 Using the flip-back armrests
To flip back the armrest, first press
the armrest fastener with one hand
to separate it from the front bracket
of seat tube. Once separated, it will
freely flip back. When flpping the
armrest forward, place the fastener
int the tube receiver and press
lightly to lock in place. (Figure 9)
MOWNER’S MANUAL
2.8 Using the removeable legrests
When assembling the legrest, you
should first line up the upper and
lower positioning holes with the pins
pins. Hang the legrest on the pins
and then swing the legrest inward to
lock in place. To detaching the
legrests, first, press the lock lever and
swing the legrest outward. Next, lift
the legrest from the pins to remove.
(Figure 10)
Figure 9
Figure 10
5
3. Maintenance
3. 1 Wheelchairs must be examined
regularly to maintain working order.
Any loose parts should be
addressed immediately. Please
reach out to your local distributor to
resolve.
3.2 Oil should be used on the
moving parts of wheelchairs to
maintain working order and
increase the lifespan of the chair.
3.3 A soft, dry dishcloth can be used
to clean water and dirt on the
surface of wheelchairs after usage
to avoid rusting.
3.4 Seat and back upholstery should
be kept clean to protect the users’
skin.
Manual Wheelchair