Onix NSB-200J-08 User manual

Low Profile Fan Heater
Model: NSB-200J-08
INSTRUCTION MANUAL
Care and Cleaning Instructions
The appliance is not designed to be dismantled without special tools. Please
do not attempt to separate the unit.
1. Ensure appliance is disconnected from the power supply and
switched off before attempting to clean.
2. Cleaning the exterior of the unit should only be attempted with a
slightly damp, soapy cloth.After wiping down the unit with the cloth,
dry any wet spots with a dry cloth.
3. Use a vacuum cleaner regularly to remove dust and fluff from the
element and grill.
4.When not in use, pack the heater into its original box for best
protection and store in a cool, clean and dry location.
Caution: Never immerse the heater in water for cleaning.
This product is covered by a 12 month replacement warranty along
with the proof of purchase.

Important Safety Instructions
Please keep this instruction manual in a safe place, along with the warranty
card, purchase receipt and carton for future reference.
The safety precautions enclosed herein reduce the risk of fire,
electric shock and injury when correctly adhered to.
Using your Heater
Assembling the Heater
No assembly is required as the fan heater comes pre-assembled and
ready-to-use straight from the package.
Using the Heater
1. Place the heater on a flat surface, away from flammable objects.
2. Select the desired operating position.The horizontal position will
spread the heat to a wider area while the vertical position will emit a
more direct heat.
3. Plug in the power cord to the wall socket when ready for use.
4.Turn the ‘heat setting’ dial clockwise to select the desired power
output.The first mode simply turns the fan on with no heat being
produced.The next mode turns on the low level heat (1000W). For
maximum heat output select high heat (2000W).
5.The ‘thermostat control’ controls the level of heat being emitted but
is dependant on the ‘heat setting’.Turn clockwise to increase the level
of heat being emitted.This function gives you the flexibility of selecting
from a wider range of heat levels.
- If the supply cord is damaged,
it must be replaced by the
manufacturer or its service agent
or a similarly qualified person in
order to avoid hazard.
- Before turning on, ensure the
electrical voltage and frequency of
the circuit correspond to those
indicated on the appliance.
- The appliance is not intended for
use by young children or infirm
persons without supervision.
- Young children should be
supervised to ensure that they do
not play with the appliance.
- Do not operate the appliance
outdoors
- Power plug must be removed
from power socket before
cleaning, servicing, maintenance or
moving the appliance.
- When the appliance is not in use,
switch it off and unplug it.
- The appliance should be placed
on a flat surface when operating
to avoid overturning.
- To reduce the risk of
electrocution, never operate this
product with wet hands, submerge
in water or spill liquids into the
product.
- Do not insert any objects into
the appliance.
- Do not kink or damage the
power cord.
- Improper installation may result
in the risk of fire, electric shock
and or injury to persons.
- The manufacturer is not
responsible for any eventual
damages caused by improper or
faulty use.
- The unit has no user-serviceable
parts contained within. Do not
attempt to repair, disassemble or
modify the appliance.

Knowing your parts
Heat Setting
The dial for the heat setting is used to activate the power output.The
fan heater can just blow with no heating, output 1000W on its low
level heating or up to 2000W on high level heating.
Important Safety Instructions
- Use the appliance only for the mentioned purpose, namely as a
radiator for domestic use. Do not use it as any other application as it
could be dangerous.
- Do not operate the heater near flammable objects
(furniture, curtains, shelves etc).
- Do not operate the heater near liquids
(bath-tubs, showers, water basins, swimming pools etc).
- Do not cover the appliance when it is operating to avoid
overheating.
- Correct operation of the appliance is obtained when the radiator is
installed vertically.
- Do not put the cable on the appliance when it is still warm.
- Do not connect the appliance to extension cords or multiple outlets.
- Never operate the appliance immediately below an outlet.
- Never connect the appliance to a thermal control device or a time
switch to avoid overheating risks when the radiator is moved or
covered.
WARNING: This appliance gets extremely hot during operation and
should be handled with care. Be careful of getting burnt. Never put
flammable objects on or near the appliance as they could set alight.
Thermostat Control
The thermostat control allows the user to set the level of heat for that
specific setting.This allows for more efficient heating as it gives you a
wider range of temperatures to control the heat being emitted.
The indicator light between the 2 dials will light up when the
‘heat settings’ dial is switched to one of the ‘on’ modes.
The convenient handle is made
from insulated plastic and acts also
as a stable base in the horizontal
operating position.The insulated
plastic makes the handle heat proof
this making it safe to touch.The large
handle, combined with the light-
weight design of the heater, makes it
easy to move around.

Important Features of your heater
Thermostat Control
-Adjust the dial to select
the desired temperature,
depending on what heat
setting has been selected.
Important Features of your heater
2 Heat settings + cooling
-To set output, adjust dial.
Settings are cooling, 1000W
heat or 2000W heat.
Carry handle
-The heater has a convinient
carry handle which also acts
as the base of the heater
if used in the horizantal
position.
Safety grille
-The safety grille provides
protection against stray
objects from touching the
heating elements.
Horizontal or Vertical
operating position
-The heater can be operated
in 2 different positions,
horizontally or vertically.The
horizontal position will ernit
the heat to a wider area, while
the vertical position will emit a
more direct heat.
Instant heating
-There is no heating-up period,
the fan blows hot air instantly.
Portability
-The heater is small in size
and lightweight making it very
portable
Built-in overheat
protection
-The heater has a built-in
sensor which will turn the
heater off if it is overheating.