PA-MC5501
SERVICE PROCESURE
1. Replacing the fuses
3. Initial setting for shipping
This symbol located near the fuse indicates that the
fuse used is show operating type, For continued protection against
fire hazard, replace with same type fuse, For fuse rating, refer to
the marking adjacent to the symbol.
Ce symbole indique que le fusible utilise est e lent.
Pour une protection permanente, n'utiliser que des fusibles de meme
type. Ce demier est indique la qu le present symbol est apposre.
REF NO. PART NAME DESCRIPTION QT’Y PART NO. REMARKS
1. ON/STANDBY
2. SPEAKER IMPEDANCE
3. AUTO STANDBY
4. INPUT SELECT
ON (Pull out the power cord at power on stage)
6 ohm
MMP : ON
Others : OFF
Unbalance
<MDC> : 120V,Canadian model
<MMP> : 230V,CE(European) country model
<MMR> : 220/230-240V,Chinese model
2. Safety check out
(U.S.A. model only)
After correcting the original service problem, perform the following safety check before releasing the unit to the customer.
Leakage current Check
Measure the leakage current to a known earth ground (water pipe or conduct etc.) by connecting a leakage current
tester between the earth ground and exposed metal parts of the unit (input/output ground terminals, screw heads or metal overlays etc.).
Plug the power supply cord directly into a 120Vac 60Hz wall socket and turn ON/STANDBY button on.
Any current measured must not exceed 0.5mA.
1234
Front Rear
!
F6601 FUSE 20A-UL-250V 1 252304GR !
F6602 FUSE 20A-UL-250V 1 252304GR !
F6603 FUSE 20A-UL-250V 1 252304GR !
F6604 FUSE 20A-UL-250V 1 252304GR !
F9100 FUSE 6.3A-SE-EAK 1 252079GR ! <MMP, MMR>
F9100 or FUSE 6.3A-SE-TL250V (1) 252279GR ! <MMP, MMR>
F9100 FUSE 12A-UL-ST6 1 252340GR ! <MDC>
F9301 FUSE 3.15A-UL/T-233 1 252323GR !
F9301 or FUSE 3.15A-T/UL-ST2 (1) 252256GR !
F9401 FUSE 3.15A-UL/T-233 1 252323GR !
F9401 or FUSE 3.15A-T/UL-ST2 (1) 252256GR !
F9402 FUSE 3.15A-UL/T-233 1 252323GR !
F9402 or FUSE 3.15A-T/UL-ST2 (1) 252256GR !
