Onkyo TX-SR307 Specification sheet

FRONT
FRONT
SPEAKERS A
SPEAKERS A
FRONT
FRONT
SPEAKERS B
SPEAKERS B
SURR
SPEAKERS
SPEAKERS
CENTER
CENTER
SPEAKER
SPEAKER
Press the SPEAKERS [A] button on
the front panel. Make sure that speaker
indicator A is shown on the display.
Press the [RECEIVER] button, and then
press the remote controller’s [SP A/B]
button repeatedly to select speaker set A.
Make sure that speaker indicator A is
shown on the display.
Turn off speaker set B when not in use.
Indicator should be off.
5/8''
(15mm)
Speaker Set A Layout (Main Room)
Front
Left
Surround
Left
Surround
Right
Listener
TV
Sub woofer
Front
Right
Center
On the
front panel
On the
remote
controller
On the
display
BA
First of all, turn on speaker set A.
3/8''
(10mm)
Surround right
speaker
Surround left
speaker
Powered
subwoofer
Front left
speaker
Front right
speaker
Center
speaker
SN 29344928(C) Copyright 2009 ONKYO CORPORATION Japan. All rights reserved.
Speaker Set A Hookup
* 2 9 3 4 4 9 2 8 *
QUICK SETUP
Model : TX-SR307
Thank you for purchasing this product.
This quick setup sheet shows the typical hookup method for connecting
speakers and AV components (DVD/BD player, TV, cable/satellite receiver).
For more detailed hookup information and operating instructions,
please see the Instruction Manual.
See the other side of this sheet
for the AV component hookup.

TV
HDMI
IN
TV
VIDEO 1
IN
HDMI
OUT Antenna input
(e.g., RF IN)
Cable/
satellite
Cable/
satellite
VIDEO
OUT
AUDIO
OUT
L
R
DIGITAL
OUT
OPTICAL
Antenna input
(e.g..RF IN)
DVD/BD
player
VIDEO
OUT
AUDIO
OUT
DIGITAL
OUT
COAXIAL L
R
HDMI
OUT
DVD/BD
player
AUDIO
OUT
L
R
DIGITAL
OUT
OPTICAL
COAXIAL
DIGITAL
OUT
AUDIO
OUT
L
R
AV Component Hookup
IF NO HDMI
See the other side of this sheet for the Speaker hookup.
If you have an HDMI-compatible TV and players, you can connect them
to the AV receiver with HDMI cables. The audio and video signals received
via the HDMI inputs are output by the HDMI OUT as they are (pass-through).
To listen through the speakers connected to the AV receiver, please make
the audio connections shown below.
If your TV or player doesn’t support HDMI, use the analog or digital
connections shown below.
Please ensure the monitor input
(VIDEO 1, VIDEO 2, VIDEO 3, etc.)
selected corresponds to actual
connection used.
Coaxial feed from
TV antenna
If you are not using
Cable/satellite box,
please refer to the
instruction manual.
Coaxial feed from TV antenna
If you are not using Cable/satellite box,
please refer to the instruction manual.
To fully enjoy the AV receiver’s
listening modes, turn off the
volume on your TV.
Assigning the Digital Input
If there’s no sound, you’ll need to assign the
digital inputs as necessary using the setup
menus on the AV receiver’s display.
If you connect your DVD/BD player to the AV
receiver’s COAXIAL DIGITAL IN, and your
cable/satellite receiver to the OPTICAL 1
DIGITAL IN, as shown, it’s not necessary to
assign the digital input.
On the front panel