Onn ONA18SB002 User manual

1
2
Package content
Identification of all buttons and jacks
Positioning
3
Connecting with a TV, Set-top box or Blu-ray / DVD Player
soundbar x 1
AC adapter x 1 remote control x 1
(with a CR2025 battery)
User manual x 1
Optical cable
OPTICAL
OUT
(not included)
Blu-ray/
DVD Player Set-Top Box
TV
QUICK START GUIDE
Model: ONA18SB002
Quick Start Guide x 1
9
8
10 11 12
1 2 3 4 5
6 7
1 Standby/ON button
2 SOURCE button
3 AUX IN RED indicator
4 LINE IN GREEN indicator
5 / VOLUME button
6 BLUETOOTH BLUE indicator
7 DIGITAL IN AMBER indicator
When OPTICAL IN is selected
AMBER indicator will illuminate.
When COAXIAL IN is selected
AMBER indicator will be flashing.
8 AUX IN R / L jack
9 DC IN jack
10 COAXIAL IN jack
11 LINE IN 3.5mm jack
12 OPTICAL IN jack
Option 1 - Best
Place the soundbar on a flat stable surface. For optimal performance, the
soundbar should be centered underneath the TV or monitor. Be sure
there is nothing blocking the front of the soundbar, and the space
between the soundbar and the surface is not obstructed.
Up to three audio sources can have direct wired connections to the
soundbar. Identify the AUDIO OUT jacks (OPTICAL OUT/COAXIAL
OUT/AUX OUT) on the device you are attaching (e.g., TV, Blu-ray
player, or set top box). Choose the option below which best fits your
audio source. The corresponding button on the remote control or
soundbar allows you to switch between sources.

Troubleshooting
4Connecting with other devices
COAXIAL
OUT
Blu-ray/
DVD Player Set-Top Box
TV
Coaxial cable
(not included)
AUX OUT
R
L
Blu-ray/
DVD Player Set-Top Box
TV
Audio cable
(not included)
RL
Bluetooth Pairing
5
Press button on the remote control to select
BT (Bluetooth) mode. The Bluetooth indicator
light on the soundbar will blink.
On your device (mobile
phone, MP3 player, etc.),
select ON70 Soundbar
from the list of available
Bluetooth connections.
The unit does not switch on.
• Make sure it is plugged in.
• Press STANDBY/ON button to turn on the Soundbar.
I have no sound.
• Press the VOLUME / button on the top of the Soundbar or
VOL / button on the remote.
• Ensure the source you’ve selected is outputting audio. If you’re using
“audio out” from your TV, ensure your TV is configured to output audio (see
TV’s menu settings).
• Ensure your AV connections are properly made (ensure you don’t have
any loose connections).
• Ensure you’ve selected the correct source (input) - the LEDs located on
the top of the Soundbar will indicate the currently-selected source (input).
• Mute is activated (the 4 LEDs on top of the Soundbar flashes). Press the
mute button on the remote control.
• Ensure the input source is selected PCM output on the setup menu of the
input device.
Cannot setup Bluetooth pairing
• Reset the bluetooth connection by turning off and on your connecting
device, or this Soundbar, or select other SOURCE on this Soundbar then
back to BT mode again.
The remote control doesn’t work
• If battery is weak, please replace the battery and ensure the new battery
is installed correctly.
• Please ensure there is nothing blocking the remote sensor on the front of
the Soundbar (refer to the User manual for the location of remote sensor).
Option 2 - Better Option 3 - Good
Printed in China 810-701595W010
MP3 or
other
audio device
Blu-ray/
DVD Player Set-Top Box
TV
Audio Cable
(not included)