ONV ONV-IPS33042PF Series User manual

USER GUIDE
PoE & Optical Transmission
ONV-IPS33042PF
ONV-IPS33032PF
PoE & Optical Transmission
Statement
Copyright @ 2002-2017 Optical Network Video Technologies (Shenzhen) Co., Ltd
All Rights Reserved
®
!
Packing List
Please kindly check the following items:
1 x Industrial PoE switch
Power Kits(Need to order it separately)
Mounting Kits
1x User Guide/Warranty Card
Note
If any shortage or damage found, please contact us in time.
This document contains proprietary information that is protected by copyright. No part of this document may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written
permission of Optical Network Video Technologies (Shenzhen) Co., Ltd.
is the registered trademark of Optical Network Video Technologies (Shenzhen) Co., Ltd. The information
and product specifications within this document are subject to change at any time, without notice and without obli-
gation to notify any person of such change.
Product Overview
Product Introduction
Note
Feature
!
This PoE switch features with 2x PoE Ethernet ports that comply with 10/100 BaseT(X),802.3af(PoE) and
802.3at(PoE+) + 1 or 2 Gigabit SFP interfaces. The power supply of single PoE port can be up to 30W. This switch
can offer power over Ethernet to network weatherproof IP camera with wipers and heater, high performance wire-
less AP, industrial VoIP phone or other PoE supported equipments, flexible for applications. SFP fiber optic port
transmission distance can be up to 120KM, with high resistance to electromagnetic interference.
/1000
Special ly designed for h arsh outdoor ap plications. I ts 3KV network port surge pro tection can ada pt to harsh outdo or environmen t and
ensure th e reliability o f the uninterru pted PoE system .
The product ‘Switch’ mentioned in the manual, if without a special requ est , it is r eferring to industrial ONV-IPS33042PF or ONV-
IPS33032PF PoE Switch Series , PoE switch or switch in short in bel ow.
Comply to I EEE 802.3,IEE E 802.3u,IEEE 8 02.3z,IEEE 80 2.3ab,IEEE 80 2.3x,IEEE 802 .1D,IEEE 802. 3at,IEEE 802. 3af,IEEE 802.1Q
IEEE 802. 1p,IEEE 802.1 x,IEEE 802.1W ,IGMP standar ds;
2x 10/ 100M s elf-sensing R J45 ports, supp ort PoE power sup ply function;
All RJ45 ports support aut o-flip (Auto MD I/MDIX);
Each PoE po rt can provide po wer up to 15.4W (af ) or 30W (at);
Supply power for powered devices compatible with IEEE8 02.3af/at;
Support IEEE802.3x ful l duplex flow con trol and duplex b ackpressure f low control;
8G backpl ane bandwidth;
8K MAC addr ess table;
Its 3KV net work port surge p rotection can a dapt to harsh out door environm ent;
Can full-load work under the temperature of -40 ~ +75 ˚ C;
1 or 2 1000M SFP fiber slot whic h is capable of hig h bandwidth and long distance transmission.
1Mbit buf fer memory
Size and Panel Description
Series
119mm
100mm
30mm
A B C
PWR LIN K
PoE
L/A
L/A
G1
G2
1000M1000M
Indust rial
Gigabi t Switc h
P o E
PWR LIN K
PoE
L/A
L/A
G1
G2
100 0 M100 0 M
Indust rial
Gigabi t Switc h
P o E
B10/100/1000M PoE RJ4 5 Po rt.
A Working Ind ic at or. Power
C. Gigabit Up li nk S FP Port
119m m
100mm
30mm
A B C
PWR LIN K
L/A
L/A
PoE
L/A
L/A
G1
G2
G3 G4
1000M1000M
Indust rial
Gigabi t Switc h
P o E
PWR LIN K
L/A
L/A
PoE
L/A
L/A
G1
G2
G3 G4
100 0 M100 0 M
Indust rial
Gigabi t Switc h
P o E
B10/100/1000M PoE RJ4 5 Po rt.
A Working Ind ic at or. Power
C. Gigabit Up li nk S FP Port
G3 G3

Indicator Description
!
Installation Guide
Please install to the supported devices.
Installation
Please confirm the following things before installation:
1. If the POE port meets the power requirement of the connecting devices.
2. If the POE standard requirement and power supply matches with the power receiving device
(½+, 3/6-( End -span)/ 4/5+, 7/8-(Mid-span))
3 .If the output power of the matched power adapter is compatible with the specification in the label of the POE switch
Please install the POE switch according to the following steps:
1. Put the PoE switch on the surface of a large and stable table, or professional industrial installation rank mount.
2. Connect Positive, Minus and Earth terminals as indicators on the power adapter.
3. Connect the network devices to the POE switch port though network cable.
1.Please do not put heavy products on the POE switch, and please ensure good ventilation environment for the POE switch.
2.Please cut off the power first before plugging the power adapter.
Power
Connect the power cable, plug it into power socket, turn on the power, then the switch will automatically initialize,
and LED lights status will display as following:
1 Except the POE port lights, all the other lights will go through the process of “on-off-on-off”, which means the system
restoration is successful.
2 Power LED remains lit.
If initialization is inconsistent with the above, please check the power.
Note
!Note
Application Connection Diagram
www.onvcom.com
Tel:[phone] Fax: [phone] E mail:onv @onv.com.cn
Address : Room 1003, B lock D , Terra b uilding , Ch egongmia o, Futian di strict ,Sh enzhen ,Ch ina
Factory a ddress:N o4- 5, A build ing, SenYu Tai S&T park , Longhua ro ad, BaoAn di strict,S henzhen, China
Model Description
ONV-IP S33 : 4-port 2x 10/1 00 M PoE por ts +2x Gigabit S FP ports ,
port 1 - 2 support PoE, compati ble wi th both IEEE 802.3af and IEEE802.3at,
,
042PF indus trial PoE switch with 1000 interface
auto-detect af/at devices. Max
PoE por t power is 30W. RJ45 ports transmission distance is 100M transmission distance of optic fiber
port with SFP module can be up to 2-120KM. Power adapter and SFP module is not included in this
package, please order separately.
ONV-IP S33 : 3-port 2x 10/100 M PoE po rts +1x Gigabit SFP ports,
port 1 - 2 support PoE, compatible with both I EEE802.3af and IEEE802.3at,
,
032PF i ndustrial PoE switch with 1000 interface
auto-detect af/at devices. Max
PoE por t power is 30W. RJ45 ports transmission distance is 100M transmission distance of optic fiber
port with SFP module can be up to 2-120KM. Power adapter and SFP module is not included in this
package, please order separately.
：Note Please confirm that the all PoE ports of PD devices are complying with IEEE802.3af/at standard.
!
AC100~240V, 50/60Hz power supply;
Power Industrial Terminals: 48 (46 ~57V)VDC, More than 50VDC is recommended when used PoE+ output,
please use
Indicator Status Description
Power Indicator: PWR
Green LED ON
Normal
PoE Indicator: PoE
Link Indicator: Link
Green LED OFF Power OFF
Green LED ON Connected PD device, PoE working properly
Green LED Blink Short circuit or current overload
Green LED OFF No connected PD or PoE power OFF
Yellow LED ON Link is OK
Yellow LED Blink Link is OK and data is being sent and received.
Yellow LED OFF Link failure and No data transmission
Green LED ON
Green LED Blink
SFP Uplink Indicator
PoE Port: The PoE ports support PoE function, which can transmit data and power simultaneously if connected
matching device. The LED lights on the front panel can show working status of each port.
Green LED OFF
Link is OK and data is being sent and received.
Link is OK
Link failure and No data transmission
Ethernet Port: Besides PoE ports, other ports are normal self-sensing Ethernet RJ45 ports which support Auto
MDI/MDIX, plug and play. The LED lights on the front panel can show working status of each port.
Industr ial
PoE Switch
ONV-IPS33042PF
PWR LINK
L/A
L/A
PoE
L/A
L/A
G1
G2
G3
G4
1000M
1000M
Indus trial
Gigab it Swit ch
PoE
Industri al
Media Converter
ONV-IPS33042F
Cat.5e/6
Cat.5e/6
Cat.5e/6
PWR LINK
L/A
L/A
PoE
L/A
L/A
G1
G2
G3
G4
1000M
1000M
Indus trial
Gigab it Swit ch
PoE