Basic Operation
ksrh 6e shsdown state, long press " O" button boots
h'.rd
h fre power on state, long press the ,O, key 3 seconds then pq-rp device
qrtios, select " Power off' for shut dom
*.pThe machine rmder noml operating conditions, Short press the power button,
rftto hibemation, Now, Screen will close. Short press the powu button again, Be able
lo 6ume nomal mode. Whm the time being use this MID can enable this featue
rten, To reduce power consmption.
k:cr reset
Ifthse is shutdom to the playq in the process ofoperation, you cm tum off
adrcsArt the player by pressing "reset" key.
Sarcen time out
lfyou do not contact the player within the set time, and do no opaate by the
hm,lte contact screen will be automatically tums off.
In any state, short press'0'button md for activation; Then skid the lock
rysreds to the green of spotted which will accomplish to access to the upper
imqhe-
Ifit is necessary to deactivate the contact screen time out function, you cm set
fu [Scre€a time out] option rmder [display] function into
IIlftMrcroSDcard
Aftirhiq tmit is connected with the 6mputer, you will find two moving disks.
Ib frs w is 6e tuift-in memory disk for this mit and the oths is the disk for the
Micro SD card. Ifno crd is inserted, the second disk can not be opened. This rmit
supports the extension of the Micro SD card from l2gMB to 32GB-
Inserting and Pulling out the Micro SD card
Inserting:
Put the Micro SD cud face up (side with words), and slightly force the card into
the socket of the cad, i.e. comecting the mit. Under this state, you cm play the
content in the Micro SD card.
Pulling:
Slightly push the Micro SD, and it will bounce by a section, and then you can
take it out.
Caution:
Plme perfom irc*ting and pulling opqation when power is of! Otheruise, it
will lead to the loss or damage to the fila within the unit! Ifno card is inserted, the
computer will be unable to perfom read and |9rite opqation for the disk notes of the
later removable disk (Micro SD card).
Battery:
High capacity Polymer battery is used for this mit.
The duation available ofthe battery power depmds on volume, types ofplaying
files md operation ofbatteries. The player can be set up by the user as ,,user define
power offtime" or "display setup,' to save batteries.
Charging:
This unit cm be recharged by USB port. you can also use DC Charger:
Take out the DC charger, plug it into the wall outlet with AC 220V(output
current 2000mA, output voltage 5V-5.2V)), then plug in the DC jack into the device
DC-in jack.
Wamings for charging:
I. Anew batteryntql be empE) and not charged beforeyougetthe dqice