Ootori RM503 User manual

MASSAGE
CHAIR
USER MANUAL
MODEL: OOTORIRM503

CONTENTS
02-05
02-04
04
04
05-09
10-11
10
11
11-12
12-13
13
14
SAFETY INSTRUCTIONS
CAUTION
GROUNDING INSTRUCTIONS
MOVING THE CHAIR
ASSEMBLY
NAMES AND PARTS
MAIN UNIT
REMOTE CONTROLLER
BEFORE STARTING USING THE CHAIR
HOW TO USE THE CHAIR
SPECIFICATIONS
TROUBLESHOOTING
Persons with any of the conditions listed below are not suitable to use the chair :
Osteoporosis patient.
People with heart disease including embedded pacemaker or other medical electronic
device inside the body.
For pregnant women or people with health issues, please consult doctor before use.
Patient with a high fever forbid to use this machine.
Perceptual disabilities patients forbid to use this machine.
Kids and the drunk people are not allowed to use this machine.
Don't use the chair when your body is wet.
This unit should not be used by children.
Do not insert your hands, fingers, feet or head into the spaces following spaces:
Between the backrest and seat or armrest;
Between the leg rest and seat or armrest;
Between the seat and armrest;
Between the back cover and leg cover;
Back of the legrest.
Do not use the unit against bare skin. While thin clothing may increase eectiveness,
exposing the skin directly to the massager may irritate the skin. Do not use the unit while
wearing anything hard on your head like a hair accessory, etc.
Do not use excessively strong massage action on the back of the neck.
Do not stretch the back muscles for more than approximately 16 minutes at a time. To
avoid overstretching the muscles which may result in discomfort, do not use the unit for
more than 5 minutes when first using it. You can gradually increase the duration and
strength of the massage as you become used to it.
Stop using the unit immediately should you experience any discomfort and consult the
physician.
Do not go to sleep while using the unit. Do not use the unit after drinking alcohol.
When the seat back is in a reclined position, do not sit on it or sit with your legs resting
on the headrest.
Be sure to start on the gentle massage program if using the massager for the first time.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
------------------------------------------------
------------------------------------------------------------
-------------------------------------------
---------------------------------------------------
----------------------------------------------------
--------------------------------------------------
-------------------------------------
---------------------------------------------
---------------------------------------------------------
------------------------------------------------------
------------------------------------------------------
--------------------------------------------------------------
CAUTION
IF YOU HAVE ANY PROBLEM PLEASE FEEL FREE TO CONTACT US
E-Mail: [e-mail]
Website: www.ootorimassagechairs.com
(Scan the barcode to visit our ocial website)
Thanks for choosing OOTORI massage chair. This operating manual
contains important information about how to use the chair safely and
correctly. Be sure that you have read all safety instructions thoroughly
before using your chair. Keep this manual nearby so that you can refer to it
any time.
01 02
·
·
·
·
·
·
·
·
·
·
·
·
SAFETY INSTRUCTIONS

If the massager functions abnormally, immediately turn o the power and have the
massager checked by an authorized service center.
Make sure there are no obstacles behind the chair before reclining it. If the back hits a
wall or pillar, the chair may malfunction. Be sure to have ample space behind the chair.
Recline the chair slowly in order to avoid contact with an obstacle.
After each massage, turn the power switch to the OFF position.
Do not use any accessories other than those recommended by the manufacturer.
If you find any rips or tears in the fabric of the massage chair contact the service
department and stop using the chair immediately.
Make sure there are no children, pets or other obstacles behind or underneath the
massage chair.
DO NOT attempt to stand or sit on the backrest, armrest or footrest in order to
prevent accident, injury or damage to the chair.
Do not stand, jump on, or place objects on the seat until the air is completely extracted
for the air massage.
Store the attachment screws out of reach of children. Accidental ingestion may occur.
Fully insert the power plug to reduce the risk of short-circuit and fire.
The unit should never be left unattended when plugged in. Always unplug the unit
when not in use.
Never operate the unit if it has a damaged power cord or plug. Return the unit to the
authorized service center if it is not working properly.
Always use sockets and wiring devices at the correct rated value. Use at the specified
power supply 120V, AC.
Do not insert or unplug the power plug with wet hands. Doing so may cause electric
shock.
Do not attempt to open or disassemble any part of the unit. Any repair service should
only be performed by an authorized service center.
Never use the unit against wet skin to avoid electricity leakage or electric shock.
11.
12.
13.
14.
15
16.
17.
18.
19.
20.
1.
2.
3.
4.
5.
6.
7.
Always unplug this unit from the electrical outlet immediately after using.
Always unplug this unit from the electrical outlet immediately before cleaning.
DANGER - To reduce the risk of electric shock:
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:
Do not use the unit on top of heating appliances, such as electric carpets, etc. Do not
operate the unit under blanket or pillow. Excessive heating can occur and cause fire,
electric shock, or injury to persons.
8
This product must be grounded.
This product is equipped with a cord having an equipment-grounding conductor and a
grounding plug. The plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
Improper grounding may lead to electric shock. Check with an authorized service center
if you are in doubt as to whether the unit is properly grounded. In case the supplied plug
does not match the outlet, do not attempt to modify the plug. Please contact a qualified
electrician to have a proper outlet installed.
This unit has a grounding plug. Make sure that the unit is connected to a power to a
power outlet with the same configuration as the plug. Do not use an adaptor with this unit.
GROUNDING INSTRUCTIONS
DANGER
MOVING THE CHAIR
As the following illustration, push the back rest downwards and tilt chair on to its wheels at
45°angle. Slowly push and maneuver the massage chair to desired location. Lower massage
chair slowly and smoothly until it is fully flat on the ground.
03 04

19.5” 19.5”
ASSEMBLY
With the backrest reclined backward, the footrest goes up. To avoid collision with any
surrounding objects, a clearance of at least 11.81” at the front and at least 19.5” at the back
should be reserved around the unit.
WARNING
1
Remove the chair parts out of the three cartons:
2
1. Armrest
2. Shouder Unit
3. Backrest
4. Chair Pad
5. Main Unit
6. Seat Cushion
7. Tools:
3
4
4 x Screw
2 x Flat head driver
2 x Allen driver
4 x Flat gasket
05 06
4 5
1 2 3
Place the backrest over the main unit. Securely lock the flat head bolts (A and C) into
both sides (B and D) of the main unit.
Press down the backrest of the main unit , A and B will be locked when a
reminding sound "Ka" is heard
Before installament After installament
Connect the rod flat head rivet (A) with the U stay fork (B), and secure them with a
slit pin (C).

5
6
7
8
10 Connect the wires in the back of seat with the wires of the pad
9
Zipper
07 08
Move the armrest slowly to adjust the position and make the holes E and F
aligned, fasten the armrest with the Allen Driver and screw.
Repeat steps 6 and 7 to install other side armrest.
Attach the chair pad to the backrest with the zipper and Velcro tapes.
Firmly insert the air plug of main unit A into the air pipe of shoulder unit B. Insert
the side panels along the hook C to the holder D.
Repeat this step to install other side shoulder unit.
Firmly insert the air plug of main unit A into the air pipe of armrest B. Insert the
side panels along the hook C to the holder D.
Connect the wires on bottom of chair: Connect the jack cable from main unit (A)
with the female cable from backrest (B), firmly insert the air plug of main unit into
the air pipe of armrest.

11
12
Place the seat onto the seat and attached it with Velcro tapes, and connect
Connect the cabel and air plugs of seat with seat cushion.
Insert the power plug and the data line of the controller into their outlet.
Set the power switch to the "on" position, the power indicator lights up.
NAMES AND FUNCTIONS OF PARTS
MAIN UNIT
1.Pillow
2.Backpad
3.Forearm Units
4.Heater
5.Seat
6.Seat Vibrator
7.Footrest
8.Armrest
9.Shoulder Units
10.Air Vent
11.Specification Label
12.Power Supply
13.Wheels
14.Power Switch
15.Electrical Fuse
16.Cord Connector
10
11
12
13 15 14 16
09 10
1
2
3
4
5
6
7
8
9

REMOTE CONTROLLER
1.TFT Display
2.Power Button
3.Auto
4.Kneading ON/OFF Button
5.Kneading & Shiatsu Mode
6.Kneading & Shiatsu Speed
7.Shiatsu ON/OFF Button
8.Foot ON/OFF Button
9.Heater Button
10.Shoulder Air Pressure ON/OFF Button
11.Hip Air Pressure ON/OFF Button
12.Arm Air Pressure ON/OFF Button
13.Leg Air Pressure ON/OFF Button
14.Seat Vibrator ON/OFF Button
15.Air Strength Adjustment Button
16.Backrest Down/Backrest Up
1
2 3
6
10
4
7
8
12
9
5
13
11
16 16
15
14
BEFORE STARTING USING
THE CHAIR
Check if the power cord, remote controller cord or power plug is damaged and check
whether there is any hair or dust on the plug.
1.CONNECT THE POWER CORD PLUG WITH THE RECEPTACLE.
The power switch is located at the lower right side of the base.
Confirm that the switch is in the l (ON) position
2.TURN ON THE POWER SWITCH.
Hold up the back pad and check for any tear in the backrest cloth as well as in any
other parts.
Should there be any tear, no matter how small it is, stop using the unit immediately,
unplug the power cord and have the unit repaired.
Check whether the power cord, remote controller cord or any other object is pinched
in the main body.
3.CHECK THE CONDITION OF THE MASSAGE CHAIR.
·
·
ABOUT THE REMOTE CONTROL
HOW TO USE THE CHAIR
AUTO MASSAGE MODE
Power: Press Power button to turn on the chair, then it will automatically start to massage.
In automatic massage modes intensity and strength cannot be adjusted. If you would
like to adjust intensity and strength please select a specific area .
such as: arm , foot, or shoulders.
One Automatic Modes:
We have one automatic mode: press “AUTO” to start or stop auto mode.
Auto massage mode will stop automatically after 15/20/30 minutes.
By selecting a single massage area, auto massage will stop
You can turn on a single massage area, or multiple areas.
This allows you to give yourself a complete customizable massage.
You can also adjust the strength of the air bags and intensity of the rollers.
·
·
·
·
·
·
CUSTOM MASSAGE MODE
Footrest unit will automatically extend to suit taller individuals.
LEG EXTENSION SETTINGS
FUNCTION
Press the button to turn on or turn o neck massage
Press the button to turn on or turn o back massage
Press the button to turn on or turn o reverse neck rollers direction
BUTTON
Kneading
Shiatsu
Kneading Mode
Shiatsu Mode
Speed
Heating
Buttock
Shoulder
Arm
Calf
Vibrating
Strength
Back Descend
Back Ascend
Press the button to turn on or turn o reverse back rollers direction
Press the button to adjust the speed of rollers in chosen area
Press the button to turn on or turn o heater
Press the button to turn on or turn o buttock compression air bags.
Press the button to turn on or turn o shoulder compression air bags.
Press the button to turn on or turn o arm compression air bags.
Press the button to turn on or turn o calf compression air bags.
Press the button to turn on or turn o calf compression seat vibrator.
Press the button to adjust the strength of airbags.
Press and keep holding the button to raise the backrest.
Press and keep holding the button to lower the backrest.
11 12
*When the chair is turned off, the LCD
display of remote controller shows Of.

G.W.
N.W.
SPECIFICATIONS
MEASUREMENT 40.35” ×24.21” × 18.50”
35.83" × 27.95" × 9.84"
40.16" × 20.86" × 11.02"
83.78 Lbs
32.85 Lbs
34.39 Lbs
63.93 Lbs
25.35 Lbs
29.32 Lbs
100W
120V/60HZ
RATED POWER
RATED VOLTAGE
FUNCTION
Press the button to turn on or turn o neck massage
Press the button to turn on or turn o back massage
Press the button to turn on or turn o reverse neck rollers direction
BUTTON
Kneading
Shiatsu
Kneading Mode
Shiatsu Mode
Speed
Heating
Buttock
Shoulder
Arm
Calf
Vibrating
Strength
Back Descend
Back Ascend
Press the button to turn on or turn o reverse back rollers direction
Press the button to adjust the speed of rollers in chosen area
Press the button to turn on or turn o heater
Press the button to turn on or turn o buttock compression air bags.
Press the button to turn on or turn o shoulder compression air bags.
Press the button to turn on or turn o arm compression air bags.
Press the button to turn on or turn o calf compression air bags.
Press the button to turn on or turn o calf compression seat vibrator.
Press the button to adjust the strength of airbags.
Press and keep holding the button to raise the backrest.
Press and keep holding the button to lower the backrest.
TROUBLESHOOTING
The rollers and the backrest
pad make frictional sound.
Motor sound is clearly hearable
during operation.
Loud sound is given when
tapping and kneading massage
is performed
This is the sound produced by mechanical
structure instead of failure of internal components.
This may occur during normal operation.
Massage is suddenly stopped
and the massage rollers return
to their original position.
*The preset auto-timing has been reached.
*In order to avoid the massage armchair from
causing accident due to overheat, this chair is
equipped with overheat reboot protection
equipment.
If the chair stops and fails to restart as a result of
overheat, turn o the main power switch for at least
30 minutes in order to prevent it from suddenly
starting after components are cooled down.
*The power button was pressed accidentally.
The remote controller does
not work.
*Check the power plug and ensure that it is
indeed plugged into the socket.
*Check whether the wires on the back of the
massage chair are properly connected.
*Confirm the main power switch is turned on.
The power cord and plug are
excessively hot.
Stop using immediately and contact the service
centre.
The massage stops in the
process.
Turn o the main switch on the back of the chair
and turn on 5 seconds later. If the same problem
occurs again, please turn
o the main switch, unplug the power cord and
contact the customer service.
PROBLEM SOLUTION
13 14