OpenVox WGW1002 User manual

www.openvox.cn 1 /5
VoxStack provides 2 working modes: Stand-alone and Cluster.
 Stand-alone: A single IP address manages one GSM modules (4 ports).
Default IP: 172.16.99.1
User Name: admin
Password: admin
Stack Num IP Username Password
1172.16.99.1 admin admin
2172.16.99.2 admin admin
3172.16.99.3 admin admin
4172.16.99.4 admin admin
5172.16.99.5 admin admin
There are two RJ45 Network ports, ETH1 and ETH2. If you choose ETH1, you can access Board 1 only, and
access other boards with the same IP address, dierent port numbers. This will help to avoid IP conict. If
you choose ETH2, you can access dierent Boards with dierent IP addresses. But there is only one RJ45
Network port on WGW1002.
This document applies to OpenVox GSM Gateway WGW1002,VS-GW1202-4/8G and VS-GW1600 series.
 Cluster: A single IP address manages up to 5 GSM modules (up to 20 ports).

www.openvox.cn 2 /5
Step 1. Set Network Parameters in Web
If your system topology like the figure described, please enter the gateway default IP address
in your browser to login web, and click “NETWORK—>LAN Settings” to set network
parameters such as IP.
Save your changes. Please type in your DNS server in “DNS Server Address”.
Please select “SIP—>SIP Endpoints—>Add New SIP Endpoint” to set SIP trunk. The
following figure shows detail information about how to set it.
About other parameters in SIP, please set by your requirements for there is no need to set
them in simple calls.
Step 2. Create a SIP Endpoint in Web

www.openvox.cn 3 /5
Step 3. Set Routing Rules in Web
Click “ROUTING—> Call Routing Rules—> New Call Routing Rule” to set outbound and
inbound routing rules like the following:
Save the inbound call routing rules, please set the outbound rules as introduced. In order to
make all calls successfully, please enable and set failover function in advanced routing rule
like that:
Please save all your changes to make effect.
Enter the directory of FreeSWITCH’s default configuration directory, add the gateway’s
configuration in /usr/local/freeswitch/conf/directory/default/
vi /usr/local/freeswitch/conf/directory/default/voxstack.xml
Step4. Create a SIP Trunk in FreeSWITCH®

www.openvox.cn 4 /5
<include>
<user id="voxstack2012">
<params>
<param name="password" value="2012"/>
<param name="vm-password" value="9999"/><!--if vm-password is omitted pass-
word param is used-->
</params>
<variables>
<!--all variables here will be set on all inbound calls that originate from
this user -->
<variable name="user_context" value="public"/>
<variable name="effective_caller_id_name" value="voxstack"/>
<variable name="effective_caller_id_number" value="2012"/>
<!-- Don't write a CDR if this is false valid values are: true, false,
a_leg and b_leg -->
<variable name="process_cdr" value="true"/>
</variables>
</user>
</include>
Outbound rules realize dialing “9+destination number ” to the remote party, and 9 can be
replaced by any other digital. Edit the outband dialplan in /usr/local/freeswitch/conf/dialplan/
default.xml
<extension name="voxstack2012_gateway">
<condition field="destination_number" expression="^9(\d+)$">
<action application="answer"/>
<action application="set" data="ringback=${us-ring}"/>
<action application="bridge" data="sofia/internal/[email protected]"/>
</condition>
</extension>
Inbound rules realize all incoming calls transfer to SIP extension 3001.
Edit the outband dialplan in /usr/local/freeswitch/conf/dialplan/public/00_inbound_did.xml.
<include>
<extension name="public_did">
<condition field="destination_number" expression="^(.+)$">
<action application="set" data="domain_name=$${domain}"/>
<action application="transfer" data="3001 XML default"/>
</condition>
</extension>
</include>
Step 5. Dialing Rules in FreeSWITCH®

www.openvox.cn 5 /5
Front Panel
Step 6. Register a SIP extension by software
Taking advantage of SIP software such as Xlite, eyeBeam to register a SIP extension(3001).
After all above steps, you can try to make calls and send SMS.
58
67
4
SIM Slot
Reset
SIM Card
Reset
1
2
3
ETH1
ETH2
ACT2
ACT1
PWR
+12V
LED Indicator Color Status
○
3Network Status LED Green and Flash Network Connected
○
4Signal Status LED
Green and Flash Module Initiating
Red and Flash No SIM Card
Red and No-flash Worst Signal Quality
Yellow and No-flash Medium Signal Quality
Green and No-flash Best Signal Quality
○
5Call Status LED
Flash (0.25s) Communicating
Blind Normal
○
7Running Status LED Green and Flash(0.5s) Work Normally
○
8Power Indicator Always Green Supply Power
During reset, all LED indicators flash.