NOTE: Package content may differ if you have placed a special
order or placed order from anywhere other than OPHIT CO., LTD.
OPHIT CO., LTD. reserves the right to make changes without
further notice to a product described herein to improve reliability,
design, packaging or function.
User’s Guide
Check the package and make sure you have everything:
Contents
(1) FTDS Transmitter & Receiver
(2) +5V DC Power supply x 2pcs
(3) DP Short copper cable x 2pcs
(*Recommend to use these copper cable which is enclosed to
ensure maximum operating performance.)
(4) User’s Guide
Have to use the copper wire which is enclosed to ensure maximum
operating performance
If any of these items are missing in your package, contact OPHIT or
your supplier for support.
Check your package Installation
Installation Steps:
1.Connect the Transmitter module to the Displayport source device using
DP short copper cable(Included)
2. Connect the Receiver module to the display using DP short copper cable
(Included)
3. Connect a single strand of OM3 multi-mode SC terminated fiber
optic cable(50/125㎛) from the Transmitter to the Receiver module.
4. Connect the included +5V DC power supply into Transmitter and
Receiver module.
5. Active LED indicator on the modules will be light up after
all connections are completed.
Transmitter Receiver
Mode Signal Assignment Signal Assignment
DEFAULT
