
User’s Guide
Check the package and make sure you have everything:
Contents
(1) DDL Transmitter & Receiver
(2) +5V DC Power supply x 1pc
(3) User’s Guide
Check your package Installation
Installation Steps:
1. Connect the Transmitter module to the DVI source device.
2. Connect the Receiver module to the display.
3. Connect 4(four) strands of multi-mode LC terminated fiber optic cable
(50/125㎛) from the Transmitter to the Receiver module.
4. Connect the included +5V DC power cable from
Receiver module and monitor.
If any of these items are missing in your package, contact OPHIT or
your supplier for support.
NOTE: Package content may differ if you have placed a special
order or placed order from anywhere other than OPHIT CO., LTD.
OPHIT CO., LTD. reserves the right to make changes without
further notice to a product described herein to improve reliability,
design, packaging or function.
4×LC type optical port
DC +5V Power jack
LED indicator
NOTE: The Transmitter module does not need to be externally
powered unless the source device does not supply enough power
through the DVI connector.
Receiver module and monitor.
5. Green LED indicator on the modules will be light up
after all connections are completed.