Oppo BDP-103EU User manual

Installation Instructions
Oppo BDP-103 / BDP-103EU / BDP-103AU
regionfree modification
Figure 1
Disconnect the mains ca le, and remove the top plate of the player.
Note the yellow marked point where the ca le must e inserted. Only one ca le needs to
e inserted.
Figure 2
Attach the oard to the side panel of the chassis. The oard has dou le-adhesive tape for
this.

Now the kit is ready for operation. This is how to use the kit:
By default, your luray player is region free for DVD. To set the luray region to A, B or C,
please do the following:
1. Power on the player without any disc inserted. The screen will after a
while show “No Disc”.
2. A out 4 seconds after the “No Disc” or “HOME MENU” displayed, press DIMMER,
DIMMER, DIMMER, MUTE and then the region code. 1 for A, 2 for B, and 3 for C.
3. Power off your player. When started up again, the regioncode has changed.
The region code selection must e done within 20 seconds.
Your players firmware must e the BDP103-38-1211 release, or newer.
To select a specific DVD region, press DIMMER , DIMMER , DIMMER , PURE AUDIO, x
Where x is the DVD region 0 to 6. Default is 0 (all regions / regionfree)