OPTIX RVM703A User guide

QUALITY PRODUCTS FOR THE PROFESSIONAL INSTALLER
REARVIEW MIRROR
7.3” Wide LCD
MODEL : RVM703A
pt x
360

6
8
TABLE OF CONTENTS
INTRODUCTION 3
Contents
DEVICE 4
INSTALLATION 5
Wiring
MODE
QUICK START
MODEL : RVM703A
MOUNTING 7
pt x
360

MODEL : RVM703A
INTRODUCTION
Congratulaons on your purchase of the Opx “7.3-inch REARVIEW MIRROR”. With rear view mirror installed,
you are able to have a great visual of what is behind your vehicle in a 7.3-inch screen. You also get two
addional video input for side cameras with trigger wires. The “RVM703A” Rearview Mirror gives you an
amazing widescreen display essenal for reverse and side cameras.
Contents
1- Rear view mirror
1- Hardwire plug
1- Bag with addional accessories.
pt x
360

INSTALLATION
1. Determine installaon locaon and verify if mount is compable. Remove your stock rearview mirror and verify the
mount is the appropriate one for your make and model vehicle. If mount is correct, place your new “RVM703A” on
the exisng glass mount. Run the cables down the pillar like the in the image below.
2. Once Mirror is in Place and the cables have been ran down the pillar, you may now begin the process of running the camera
video cables to your 3 video inputs. Aach each trigger to the appropriate
Includes:
•1 Rearview Mirror
•1 wire harnes
DEVICE
MODEL : RVM703A
NOTE:
Make sure the Mirror has the
corresponding mount to your make and
model vehicle.
pt x
360

INSTALLATION
1. Determine installaon locaon and verify if mount is compable. Remove your stock rearview mirror and verify the
mount is the appropriate one for your make and model vehicle. If mount is correct, place your new “RVM703A” on
the exisng glass mount. Run the cables down the pillar like the in the image below.
2. Once Mirror is in Place and the cables have been ran down the pillar, you may now begin the process of running the camera
video cables to your 3 video inputs. Aach each trigger to the appropriate
MODEL : RVM703A
Run Cable
down Pilar
pt x
360

3rd Camera view buon
MODEL : RVM703A
MODE
A fascinang feature included in the “RVM703A” is the capability to view camera 3
(reverse) at all mes with the press of a buon. The buon underneath the mirror will
allow you to view behind while driving, ideal for people with horse trailers and other
types of trailers.
Press the M for menu on the right glass poron of the mirror and go through sengs
adjusng to your preference. Screen Brightness,Contrast,Color,Reset.
Up
Menu
Down
pt x
360

MODEL : RVM703A
Dierent cars have dierent brackets, make sure your windshield
mount matches the mount on the “RVM703A”.
Once you have the appropriate mount slide the mirror down on
the glass mount and ghten the screw with the tool provided. Do
not put heavy force when sliding the mirror on the mount. Failure
to do so may cause breaking windshield.
Accele Electronics will not be responsible for damages caused to
your car due to improper mirror installaon.
MOUNTING
pt x
360

MODEL : RVM703A
QUICK START
1. Remove old Mirror carefully and Idenfy if
bracket and mount are the same
2. Aer idenfying the correct mount, Slide the
Mirror to the mount and ghten to secure its
posion.
3. Fish out the cables from the headliner and run
them down the “A” pillar.
4. Idenfy where you will be making your
connecons (ignion,12V baery constant,
ground, Trigger 1,2, and 3 and run your cables
to the desired locaon.
5. Aer all connecons have been made, adjust
the mirror gently to your height/preference.
Accele Electronics will not be responsible for damages caused to
your car due to improper mirror installation. Thank you for being a
valued customer of ACCELE ELECTRONICS
pt x
360
When it comes to quality cameras & driver safety, Accele is the brand you can depend on.