Optoma CinemaX Pro Use and care manual

Optoma CinemaX Pro Warp
Calibration Control Guide

2
(Date) : 2020/03/04 (Version) : 1.0

3
Version Management
Version Date Description
1.0 2020/03/12 Initial Release

4
Contents
Version Management.....................................................................................................3
Contents .........................................................................................................................4
Warp Control Function of Geometric Correction................................6
Select Display Page....................................................................7
Accessing Geometric Correction
Select the Warp Control Option . ....................................................7
Turn On/Off Warp Control Function. .................................................... 8
〝Setting movement Increment" Function .............................................................9
Warp Quantity Adjustment Process ........................9
Warp Value - Amount of Warp Adjustment Point Settings ......................10
2 * 2 ( Inner On : 4 points ; Inner Off : 4 points )..................................10
3 * 3 ( Inner On : 9 points ; Inner Off : 8 points ) .................................. 11
5 * 5 ( Inner On : 25 points ; Inner Off : 16 points )..............................12
9 * 9 ( Inner On : 81 points ; Inner Off : 32 points )..............................13
Warp Inner - Inner Warp Quantity Point Adjustment Settings....................14
ON ( Inner Points Visible ) .....................................................................14
OFF ( Inner Points Invisible ) .................................................................15
Grid Color - Grid Line Color Settings ......................................................16

5
 e.g., Red Color ofGrid Line. ( Green,Magenta,Red,
Cyan) ............................................................................................................16
Cursor Color - Cursor Color Settings ......................................................17
 e.g., Red Color of Cursor. ( Green,Magenta,Red,Cyan )
......................................................................................................................17
Warp Calibration - Select Target Cursor and Execute Warping Process .18
〝Reset〞Function Introduce....................................................................................21
Reset Warp Settings
Settings to Default................................................................................................21

6
Warp Control Function of
Geometric Correction
Step1 : Power on Projector and press the menu
key on the remote to access the OSD Menu.
Warp Control Function of Geometric Correction

7
Step2 : Select the Display Page.
Step3 : Select the Geometric Correction
from the menu.
Step4 : Select the Warp Control Option
Warp Control Function of Geometric Correction

8
Use the remote to toggle Warp Control "on" and "off".
Ensure Warp Control is set to "on".
←Warp Control OFF
←Warp Control ON
Warp Control Function of Geometric Correction

9
Setting Movement Increment Function
Warp Quantity Adjustment Process
Warp Quantity Adjustment Values :0.5, 1, 4, 16, 32, 64
Warp Quantity defines the amount of image movement.
Example: Increment of 1 will result in a very minor
adjustment. 64 will result in large adjustments to the image.
Setting Movement Increment Function

10
Options Settings
Warp Number - Amount of Warp
Adjustment Point Settings
Warp Point Adjustments is the number of "points" that can
actually be maniulated (move/Adjusted). 4 to 8 is sufficent for
images with a slight misalignment . To adjust the inside points of
a region (such as region 1 of 4, ensure Warp Inner is enabled.
2 * 2 ( Inner On : 4 points ; Inner Off : 4 points )
Options Settings

11
3 * 3 ( Inner On : 9 points ; Inner Off : 8 points )
Options Settings

12
5 * 5 ( Inner On : 25 points ; Inner Off : 16 points )
Options Settings

13
9 * 9 ( Inner On : 81 points ; Inner Off : 32 points )
Options Settings

14
Warp Inner - Inner Warp Quantity Point
Adjustment Settings
ON ( Number of Inner Points that can be adjusted )
Options Settings

15
OFF ( Inner Points not visible )
Options Settings

16
Grid Color - Grid Line Color Settings
determine color of grid lines, e.g., Red Color of Grid
Line. (All of the Color : Green,
Magenta, Red, Cyan)
Grid Color - Grid Line Color Settings

17
Cursor Color - Cursor Color Settings
e.g., Red Color of Cursor. ( All of the Color : Green,
Magenta, Red, Cyan )
Cursor Color - Cursor Color Settings

18
Warp Calibration - Select Target Cursor and
Execute Warping Process
Step 1 : Press “Enter” Key toaccess Selection Mode.
Warp Calibration - Select Target Cursor and Execute Warping Process

19
Step 2 : Use the directional keys on the Remote to
select the Target Cursor.
Step 3 : Press the“Enter" Key toaccess Warping Mode.
Press the back key on the remote to go back to the selection
cursor.
Step 4 : Use the directional keys on the remote to

Warp Calibration - Select Target Cursor and Execute Warping Process

20
execute to adjust the increiment of the warp adjustment.
Press the back key on the remote to go back to the
selection cursor.
Warp
Warp Calibration - Select Target Cursor and Execute Warping Process