optonica 7451 User manual

USER MANUAL
SOLAR WALL LIGHT WITH PIR SENSOR
1.Product Structure
Working Mode Lighting Control+PIR
Sensor
Lighting Control+PIR
Sensor
Lighting Control+PIR
Sensor
Lighting Control Automatic ON and discharge when gets dark, Automatic OFF and charging
when daybreak.
Name
Product parameter
7451 7452 7453
Installation Height 3-6Meters
Max sensor distance 12Meters at environment temperature 25℃
Temperature
andHumidity
Temperature: charging above 10℃, discharging above -5℃Working
humidity: 95%RH
Precautions for use of PIR sensor:
1) The best working environment for PIR sensor is 25℃, with the best sensitivity
and distance. When the temperature difference is very smallbetween the human
body andthe environment, the sensitivity of PIR sensor will drop, the induction
distance becomes short, which is a normal condition.
2) PIR sensor detects human temperature, not speed and movement.

2. Product Working Mode
Touch the switch to select working mode and switch in cycles. After selecting the
mode, there is no need to switch again. There are three kind of working modes:
Induction&Slight mode, Induction&full OFF mode, Automatic mode.
1) Press the button to enter the Induction & Slight mode: People come and lamp
enter to high brightness, people walk away for 20 seconds and lamp enter to slight
brightness(3% of high brightness).
2) Press the button again to enter Induction&full OFF mode: People come and
lamp enter to high brightness, people walk away for 20 seconds and lamp will be full
off.
3) Press again to enter the Automatic Mode: Automatic ON and discharge when gets
dark, Automatic OFF and charging when daybreak. Lighting time is 14hours after
full charge.
4) Press again to enter the OFF Mode: the Solar Multi-function Wall Light enters the
off state.
4. Product Instructions
1) This product is solar photovoltaic lighting, environmental protection, low voltage
safety.
2) Widely used in courtyard, lawn, garden andother places.
3) Before use, please place the lamp directly under the sun to charge for at least 6
hours.
4) Automatic charging during the day, automatic start and automatic light at night.
5) Easy to install, no wiring, do not need to connect electricity and complex
installation process.
6) When installing, please install the lamp in a place with strong and sufficient
sunlight and pay attention to the installation angle to ensure that the photovoltaic
panel has enough sunshine to charge the battery.
7) The charging effect of solar panels depends on sunniness, illumination time and
weather conditions. The stronger the sunshine, the faster the photovoltaic panel
charges. Charging on rainy or cloudy days is less effective and the lighting time is
shorter.
8) Internal charging over-voltage protection and low voltage discharge protection,
safety circuit, stable quality.
9) Unique appearance, independent research and development and production, patent
private mold.

3. Installation Instructions
1. Drill holes into the mounting surface and
insert expansion screws
2. Installthe bracket
3. Fix the lamp on the bracket and rotate the
angle: the photovoltaic panel faces 5-10 degrees
south to the west, and forms an angle with the
horizontal plane (30 degrees south, 45 degrees
north), and tighten itafter selection
4. Touch the switch on the lamp to turn on the
lamp and select the workingmode; At the same
time, the luminous surfacecan be rotated 180°to
adjust the required beam angle
5. The direction of the lamp can be adjusted to the
wallirradiation, and the working mode can choose
the Time Control
5. Important Notice
-Please keep the installation tools away from children.
Contains batteries, batteries are recyclable, please do notthrowthem away.
- Contains batteries, the product is strictly prohibited to be placed on fire, it may explode.
-Please do not connect to 110/220V electricity current to avoid damage lamp body.
-Please install on a flat and stable surface, and fix the photovoltaic panel and the lamp body
to prevent wind or other reasons from hurting people.
-In order not to affect the use effect, clean up the dust or debris on the surface of the solar
photovoltaic panel every 3-4 months.
-In autumn, winter, continuous cloudy or rainy days, the charging effect will be weakened and
the lighting time will be shortened, which is normal.
-Forbi d installing lamps near air conditioners, heating objects, or high-voltage power grid
systems.
IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor; Phone: [phone];