Optronis CamPerform CP90-25P-M-72 User manual

CamPerform
CP90-25P-M/C-72
CoaxPress Camera
User Manual
Ref. 1896-SU-01-D

CP90-25P-M/C-72 Ref. 1896-SU-01-D Page 1
Contents
Revision 3
General 4
Declaration of conformity 4
RoHS compliance 4
Scope of delivery 5
Optronis customer service 5
Remark, Attention 6
Precautions 6
Camera Power 6
Environmental Conditions 6
General Precautions 7
Camera 8
Electrical Interface 9
Auxiliary (Aux.) connector pinout 10
Camera Power 12
Indicator Lamp (LED) 13
CoaxPress Data Channels 13
Lens mount and handling 14
Nikon F-Mount adapter 14
C-Mount adapter 16
Important features 16
Frame format 16
CoaXPress configuration (speed and cabling) 16
Minimum Frame rate (@ internal synchronisation) 17
Maximum Frame rate (@ internal synchronisation) 17
Max. Frame Rate Examples: 17
Calculation of Maximum Frame Rate at CXP6: 17
Calculation of Exposure Time 18
Frame Rate (@ external synchronisation) 18
Multi ROI 18
Technical Data 19
General 19
Spectral Response / Transmittance 20
Mechanical Dimensions 21
F-Mount Lens (/CM) 21
Synchronisation Input schematics 23
Synchronisation Output schematics 23
Internal Synchronisation Timing 24
Synchronization Output 24
External Synchronisation Timing 25
Synchronization Input “level detection” 25
Synchronization Output “level detection” 25
Focal Length Calculation 26
Full Sensor Resolution 26
Reduced Sensor Resolution 26
Distance Washer 28

CP90-25P-M/C-72 Ref. 1896-SU-01-D Page 2
Camera firmware update 29
Camera Control 31
Gen<i>Cam 37

CP90-25P-M/C-72 Ref. 1896-SU-01-D Page 3
Revision
Manual revision
Date
Comments
1896-SU-C
06.07.2017
First released version
1896-SU-D
24.07.2017
Update layout. Add CXP configuration and Multi ROI
paragraphs.

CP90-25P-M/C-72 Ref. 1896-SU-01-D Page 4
General
Declaration of conformity
Manufacturer: Optronis GmbH
Address: Ludwigstr. 2, 77694 Kehl, Germany
We certify and declare under our sole responsibility that the
following apparatus
Product: CP90-25P-M-72
CP90-25P-C-72
conform with the essential requirements of the EMC Directive
2014/30/EU, based on the following specifications applied:
Specifications: EN 61000-6-3 Emission
EN 61000-6-1 Immunity
Kehl, 16.08.2016
Optronis GmbH
Dr. Patrick Summ
Managing Director
RoHS compliance
CamPerform CP90-25P-M/C-72 cameras are Pb free manufactured.

CP90-25P-M/C-72 Ref. 1896-SU-01-D Page 5
Scope of delivery
CP90-25P-M/C-72 CoaxPress camera
Options: /C: Color sensor (Bayer Pattern)
(IR Cutoff Filter, Specification: 1830-SS-10)
/M: Monochrome sensor
Lens mount: /CM: CMount
/FM: FMount
/FMG: FMount for Nikon G-Lens series
CoaxPress: up to 6,25GBit/channel, 4 channels
Synchronisation Adapter cable (Option)
Programming cable (USB2) for firmware update (Option)
User Manual (CD-ROM)
Optronis customer service
Optronis GmbH
Ludwigstr 2
77694 Kehl
Germany
Tel: [phone]
Fax: [phone]
E-mail: [email protected]
For any questions or problems, please do not hesitate to ask our customer
service. Please prepare the following information:
•Camera type: CP90-25P-M-72 or CP90-25P-C-72
•Serial-Number: see label at the bottom side of the camera
•Frame Grabber
•Operating System (Windows XP/Vista/32bit/64bit …)
•Short description of the problem

CP90-25P-M/C-72 Ref. 1896-SU-01-D Page 6
Remark, Attention
This user manual is compliant with the firmware version v.8.1 of the camera.
The following signs are used in the user manual
Remarks and additional information
Attention
Precautions
Camera Power
Please use Power over CoaxPress or as an option the CP90-25P-M/C-72
camera power supply (not included in shipment).
Environmental Conditions
Temperature range during operation: < + 45°C (housing temperature)
> 0°C (ambient temperature)
Humidity during operation < 80% non-condensed
At high ambient or housing temperatures the camera lifetime will be
reduced. Avoid camera operation beyond temperature limits. Please
ensure, that the housing temperature will be kept as low as possible
by additional heatsinks.

CP90-25P-M/C-72 Ref. 1896-SU-01-D Page 7
General Precautions
Read the user manual carefully before using the camera.
Do not orientate the optical input of the camera to direct sunlight.
Keep the camera free protected from dirt, dust, grease and water.
Make sure that all the connecting cables are in good condition. Defective cables
have to be replaced.
Always unplug the camera before cleaning it. Do not use cleaning liquids or
sprays. Instead, use a dry and soft duster.
There are no serviceable parts inside the camera. Do not open the
housing of the camera.
Warranty becomes void if the camera housing is opened.

CP90-25P-M/C-72 Ref. 1896-SU-01-D Page 8
Camera
1: Camera housing 2: Mounting holes 2x M4x6mm 1x ¼ ``x6mm
3: Lens mount (Nikon-F) 4: Nikon lens
5: electrical interface (back side) 6: Mounting holes 4x M4x6mm
1
3
4
6
5
2