Oracle 7087210 User manual

Copyright © 2014, Oracle and/or its affiliates. All rights reserved.
Copyright © 2014, Oracle et/ou ses affiliés. ous droits réservés.
The 1.6TB solid state drive (SSD) is used in
multiple
brackets) depending on the system
. Replacement SSDs are shipped ith t o different types of
these differences.
The SSD included in this kit is assembled ith the drive carrier that is
When replacing an SSD in an Oracle FS
System Drive Enclosure
replacement SSD ith the drive carrier that is
compatible ith the DE2
Kit Contents
• One 1.6TB SSD pre-installed in a drive
carrier
• One empty drive carrier required
to install the 1.6TB SSD
• Five Phillips Number 1
scre s (four required
• One o
verlay label that contains the ne assembly part number
Required Tools
• Phillips Number 1 scre driver
Replace the Drive Carrier
NOTE: Before removing a failed SSD
drive from a Drive Enclosure, be sure to install the ne SSD into the drive carrier that is
compatible ith the DE2-
24P Drive Enclosure.
1. To remove the SSD from the pre-
installed
Common
1.6TB
SSD Kit
7087210
multiple
Oracle storage systems that require
different drive carriers (also kno n as
. Replacement SSDs are shipped ith t o different types of
drive
carriers to accommodate
The SSD included in this kit is assembled ith the drive carrier that is
compatible ith the
Oracle ZFS Storage ZS3
System Drive Enclosure
, you must exchange the drive carrier
pre
compatible ith the DE2
-24P Drive Enclosure.
Please read the instructions belo .
carrier
that is compatible ith the Oracle ZFS Storage ZS3
to install the 1.6TB SSD
in the DE2-24P Drive Enclosure
scre s (four required
scre s and one scre provided as a spare)
verlay label that contains the ne assembly part number
drive from a Drive Enclosure, be sure to install the ne SSD into the drive carrier that is
24P Drive Enclosure.
installed
drive carrier, unscre the four scre s as sho n
in the follo ing graphic
Part No. 7087210
March 2014
1.6TB
different drive carriers (also kno n as
carriers to accommodate
Oracle ZFS Storage ZS3
-2 server.
pre
-installed on the
Please read the instructions belo .
that is compatible ith the Oracle ZFS Storage ZS3
-2 server
drive from a Drive Enclosure, be sure to install the ne SSD into the drive carrier that is
in the follo ing graphic
:

Copyright © 2014, Oracle and/or its affiliates. All rights reserved. Part No. 7087210
Copyright © 2014, Oracle et/ou ses affiliés. ous droits réservés. March 2014
2. Install the ne SSD into the drive carrier that is compatible ith the DE2-24P Drive Enclosure. Use the extra drive
carrier and the scre s provided in this kit.
NOTE: Do not reuse the existing scre s.
3. Place the ne overlay label over the top of the base part number and bar code label. This allo s the correct part
number of the ne drive and carrier assembly to be visible.
The SSD is no ready to be installed into a DE2-24P Drive Enclosure.
4. Install the failed drive into the original (shorter) drive carrier provided in the kit and return all of the parts to Oracle.