Orbit Fitness OAF300 User manual

350 lbs/160 kgs.
OAF300
AIR BIKE OAF300
OAF300

Seat
Rear Stabilizer
Main Frame
Transport Wheel
Computer
Right Handlebar
Left Cover
Adjustable foot
Hand Grip
Fan Cage
Right Pedal
Left Pedal
Front Stabilizer
Right Cover
Footrest
THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY:
BEFORE YOU BEGIN
2
Warning Sticker
Customized Wrench
Screwdriver
Thank you for choosing the .We
take great pride in producing this quality product
and hope it will provide many hours of quality
exercise to make you feel better, look
better, and enjoy life to its fullest.
It's a proven fact that a regular exercise program
can improve your physical and mental health.
Too often, our busy lifestyles limit our time
and opportunity to exercise. The
provides a convenient and simple method to begin
your journey of getting your body in shape and
achieving a happier and healthier lifestyle.
Before reading further, please review the
drawing below and familiarize yourself with the
parts that are labeled. Locate the serial decal on
the product and write the serial number on the
cover of the manual in the space provided. See
page 5 for an image of the serial decal. Model
number and serial number are required when
calling for assistance.
Read this manual carefully before using
the .
Although Orbit Fitness constructs its products
with the finest materials and uses the highest
standards of manufacturing and quality control,
there can sometimes be missing parts or
incorrectly sized parts.
If you have any questions or problems with the
parts included with your Air Bike, please do not
Be sure to have the name and model number of
the product available when you contact us.
Serial Decal
Cam Handle
Seat Post
Left Handlebar Computer Support
Water Bottle
Footrest

3
This chart is provided to help identify the fasteners used in the assembly process. Place the washers or
the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to
check the length of the bolts and screws.
3/16" 1/4" 5/16"
3/8" 1/2"
INCHES
0 1/2 1 1/2 2 1/2 3 1/2 4 1/2 5 1/2 6in.
0 10
20 30 40 50 60 70 80 90 100 110 120 130 140150
mm.
MILLIMETERS
6 8 10 12
NOTICE: The length of all bolts and screws, except those with flat
heads, is measured from below the head to the end of the bolt
or screw. Flat head bolts and screws are measured from the
top of the head to the end of the bolt or screw.
Part Number and Description Qty
93 Nylock Nut (M8 x 1.25) 2
105 Bolt, Flat Socket Head (M8 x 1.25 x 30mm) 4
106 Screw, Round Head (M5 x 0.8 x 12mm) 4
107 Bolt, Flat Socket Head (M6 x 1 x 15mm) 6
108 Bolt, Button Head (M10 x 1.5 x 20mm) 8
109 Bolt, Socket Head (M6 x 1 x 10mm) 2
112 Arc Washer (M10) 8
After unpacking the unit, open the hardware bagand make sure that you have all the following
fasteners. Some fasteners may be already attached to the parts.
HARDWARE IDENTIFICATION CHART
length
length

ASSEMBLY INSTRUCTIONS
NOTE: There are some packing parts attached on the Air Bike. Please follow the steps below to
remove them before any assembly. These parts are only for packing, do not dispose of the
packing materials until assembly is completed.
STEP 1
Remove the CARDBOARD ROLLER from the front of the MAIN FRAME(1) by removing the BOLTS.
Make the TRANSPORT WHEELS(43) on the FRONT STABILIZER(40) face the front, then attach the
FRONT STABILIZER(40) to the MAIN FRAME(1) with BUTTON HEAD BOLTS(M10x1.5x20mm)(108)
and ARC WASHERS(M10)(112).
STEP 2
Remove the CARDBOARD ROLLER from the back of the MAIN FRAME(1) by removing the BOLTS. Attach
the REAR STABILIZER(44) to the MAIN FRAME(1) with BUTTON HEAD BOLTS(M10x1.5x20mm)(108)
and ARC WASHERS(M10)(112).
NOTE: See page 12 for detailed leveling instructions to prevent rocking.
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed.
Some product parts are fit tested at the factory to ensure proper fit and alignment. Marks in
the paint may be noticeable, but are not an indication of damage.
4
Cardboard Roller
Bolts
Cardboard Roller
Bolts

ASSEMBLY INSTRUCTIONS
STEP 3
Slide the RIGHT HANDLEBAR(58) onto the shaft on the MAIN FRAME(1), then secure by screwing
the FOOTREST(83) onto the shaft. Refer to the inset drawing. Use the customized wrench to securely
tighten the FOOTREST(83). Press one DECORATIVE PLUG(84) into the end of the FOOTREST(83).
STEP 4
Attach the LINKAGE(26) to the lower end of the RIGHT HANDLEBAR(58) with the FIXING PLATE(74),
DISC SPACER(75), FLAT SOCKET BOLT(M8x1.25x30mm)(105), and NYLOCK NUT(M8x1.25)(93).
Do Not Securely Tighten The Bolt Until Step 5.
STEP 5
Attach the FIXING PLATE(74) to the LINKAGE(26) with FLAT SOCKET BOLTS(M6x1x15mm)(107).
Securely Tighten All Of The Bolts.
Do the same way from Step 3 to Step 5 to attach the LEFT HANDLEBAR(51), and connect the
LINKAGE(26).
5
Customized Wrench

ASSEMBLY INSTRUCTIONS
6
STEP 6
NOTE: The RIGHT PEDAL(39) has an Rstamped on the end of the pedal shaft. The RIGHT PEDAL
(39) has right hand threads and is tightened by turning clockwise. The LEFT PEDAL(34) has
an Lstamped on the end of the pedal shaft. The LEFT PEDAL(38) has left hand threads and is
tightened by turning counterclockwise.
Loosen the FLAT SOCKET BOLTS(M6x1x10mm)(109) RIGHT DISC CRANK(28). Thread
the RIGHT PEDAL(39) to the RIGHT DISC CRANK(28) as shown. Tighten the pedal securely. The
shoulder of the PEDALS(38, 39) should be in contact with the DISC CRANKS(24, 28) when securely
tightened. For more security, tighten the FLAT SOCKET BOLTS(M6x1x10mm)(109) into the RIGHT
DISC CRANK(28). Do the same to attach the LEFT PEDAL(38) to the LEFT DISC CRANK(24).
STEP 7
Connect the SENSOR WIRE(59) to the CONNECTION WIRE(63), then attach the COMPUTER
SUPPORT(48) to the front of the MAIN FRAME(1) with FLAT SOCKET BOLTS(M8x1.25x30mm)(105).
NOTE: Be careful not to damage the wires when attaching the COMPUTER SUPPORT(48).
Shoulder
Shoulder

ASSEMBLY INSTRUCTIONS
STEP 8
Install two AA batteries into the COMPUTER(85), the batteries are included.
Plug the CONNECTION WIRE(63) to the COMPUTER(85). Place the COMPUTER(85)
onto the
COMPUTER SUPPORT(48) and secure with ROUND HEAD SCREWS (M5x0.8x12mm)(106).
NOTE: Be careful not to damage the wires when attaching the COMPUTER(85).
STEP 9
Press the WATER BOTTLE HOLDER(113) into the hole in the COMPUTER SUPPORT(48). Place the
WATER BOTTLE(114) in the WATER BOTTLE HOLDER(113).
7

4 feet
6 feet
8
Place the in the area where it will be used. It is recommended that the be placed on an
equipment mat. is approximately 50.1 inches long (max.) x 24.8 inches wide x 50.7 inches tall.
An area 4 feet wide x 6 feet long is required for safe operation of the .Make sure that adequate
space is available for access to and passage around the .
LEVELING: Adjust the under the so that the
Bike sits on the floor without rocking. Refer to the instructions below the illustration.
MOVING: The Bike has a pair of on the FRONT
Lift up from the handle at the back of the to move.
SET UP INSTRUCTIONS
FUNCTION INSPECTION:
Visually inspect the to verify that assembly is as shown in the above illustration. Check the
function of the by turning the crank slowly through one complete revolution to verify that the drive
train functions properly.
Loosen the until they
touch the . Adjust the
for leveling. Tighten
the
the to
in position.
Equipment Mat
CAUTION: Locate and read the on the Make sure that
all users read the before using.
ADJUSTABLE FOOT(46)
TRANSPORT WHEELS(43)
ADJUSTABLE FOOT(46)
ADJUSTABLE FOOT(46)
securely against
lock the
WARNING STICKER(115)
WARNING STICKER(115)

OPERATIONAL INSTRUCTIONS
9
SEAT HEIGHT ADJUSTMENT
center the foot bow on the pedal in the down position. Your leg should be slightly bent and relaxed as
If your leg is too straight or your foot cannot touch the pedal, you will need to lower the seat. If your leg is
bent too much you will need to raise the seat. Pull up the CAM HANDLE(76) to release the SEAT POST(60).
Lower or raise the SEAT(73) to the desired height and secure by push down the CAM HANDLE(76).
NOTE: Before using, always make sure the SEAT(73) is securely locked with the CAM HANDLE(76).
FORWARD/AFT POSITION OF SEAT
Adjusting the SEAT(73) forward or backward helps you work
Lift up the ADJUSTMENT LEVER(62), then slide the SEAT
(73) to the desired position, release the ADJUSTMENT
LEVER(62) to secure the SEAT(73) in position.
shown.

COMPUTER INSTRUCTIONS
10
Move the pedals or press any button.
after 60 seconds of inactivity.
During workout, except running an Interval
seconds of inactivity.
When running an Interval Program, except
you press the STOP button, the program
POWER OFF :
POWER ON :
Press to start the selected program, or resume the program in Stop mode.
Press to stop/pause the program.
Press and hold the button down for two seconds to reboot the computer, and go to the
enter Age mode.
Press to increase the preset values.
Press to decrease the preset values.
Press to select the Time program.
Press to selectethe Distance program.
Press to select the Calories program.
Press to select the Heart-Rate program.
NOTE: To use this function, You must wear the HEART RATE TRANSMITTER
around your chest to measure your heart rate.
Press to enter and start the Interval 10/20 program.
Press to enter and start the Interval 20/10 program.
Press to enter and start the Interval Custom program.
FUNCTION BUTTONS:
ENTER:
START :
STOP:
(UP):
(DOWN):
Target Time:
Target Distance:
Target Calories:
Target Heart-Rate:
Interval 10/20:
Interval 20/10:
Interval Custom:
Your Air Bike utilizes an air fan system to create resistance
for your workout. We recommend that you use this
computer console to vary your workout from session to
tness goals.
When used regularly in this way, the computer console can
become an important source of motivation and interest which
will help keep you on track.