Orion TI-84 Plus –FAQ Version 0.1
Orbit Research Confidential and Proprietary Information 4
2. TI Connectivity USB Graph Link Cable. (Note: This is not the Standard A to
Mini-B cable included with your purchase.)
Q. What are the function are available in the Orion TI-84 Plus?
A. It has Graph Option, Speech Option, braille Option, Speech and tone Mode,
Replaying Graph, Replaying indicators of a Graph, Reviewing the screen.
Q. What is the standard warranty period?
A. The device has standard 1 year warranty from the date of purchase and you
can purchase extended warranty within 60 days from the date of purchase.
Q. When units do not charge what should we do?
A. If the unit is not charging, the charging circuit on PCB, the USB port or battery
may have some issue.
a. Connect the device to a known good wall charger through USB meter.
Check if it announces “charger connected” message and USB meter
shows some current reading.
b. If it announces “charger connected” message” and USB meter shows
some current reading, let the unit charge for an hour. The battery% should
increase. If unit does not increase, replace he battery and check. If
battery% does not increases even after replacing the battery, some issue
with other circuit on PCB, send it to repair.
c. If it does not announce “charger connected” message, some issue with
USB port, send it to repair.
Q. What is the reason when unit does not power on?
A. This could be due to battery issue (AAA batteries) in TI calculator or some
issue with TI calculator. Replace the batteries in TI calculator and check. If unit
does not work after replacing the batteries in TI calculator, then there are internal
batteries on back of the device on top corner. Please remove and reinsert it. If
Q. How can we upgrade the Orion TI-84 Plus?
A. Connect Orion TI-84 Plus in upgrade mode in order to upgrade the device.
You can upgrade your device with the windows computer.
Q. How to recover the device in case the upgrade process fails in between?
A. To reset, turn the Orion TI-84 Plus off by pressing the 2nd key followed by the
On key. When the calculator is off, press the Shift and CTRL keys together on
the Orion. Then, turn the calculator back on by pressing the ON key. You should
hear the Orion TI-84 Plus power on, at which point you can continue your work
from where you left off. If the Orion does not come on, repeat the above steps.
You may need to do this a couple of times. If it still doesn't turn on, contact