Oregon Scientific PMP238N User manual

GB
1
DESCRIPTION AND
FUNCTION OF PARTS
A. LCD
-Multi-function display
B. [ ] Button
-Increases values when setting the clock or timer
C. [MODE]Button
-Alternates between clock and timer displays
-Initiates settings changes
D. [ST/SP]Button
-To start or stop the timer
E. BatteryCompartment
-One (1) CR2032 3V lithium cell
PILLBOX TIMER
MODEL: PMP238N
INSTRUCTION MANUAL
INTRODUCTION
Congratulations on your purchase of the easy-to-use
Pillbox timer (PMP238N).
This product combines several unique features to assist
individuals when taking medication. Features include a
medication timer with alarm, and a digital clock.
The PMP238N’s trouble-free qualities are enhanced
through the product’s small size, it’s lightweight, and
pillbox design.
FEATURES
1. Pillbox storage
2. User select 12 or 24-hour clock
3. Countdown timer
4. Timeralarm
5. Low-battery indicator

GB
2
GETTING STARTED
BATTERYINSTALLATION
1. Using a coin, carefully twist open the back panel.
2. Insert one (1) CR2032 3V lithium cell or equivalent
3. Replace the battery compartment door.
Once batteries are inserted into the unit, the user will hear
a beeping sound and all segments of the LCD will briefly
illuminate. The display will be set to factory values which
is 12:00:00AM for time and 0:00:00 for the timer. The
current time will require manual setting.

GB
3
Alow-batteryicon[ ]indicatesthatthebatteriesrequire
changing.
Note: If not disposed properly, batteries can
be harmful. Protect the environment by taking
exhausted batteries to authorized disposal
stations.
MEDICATION STORAGE
This device has a pillbox. Use the compartment for storing
medication.
WEARING THE PILLBOX
Using the attached cord, the device can be secured to
clothing.
GENERAL OPERATION
ABOUT DISPLAY MODES
This unit has a display for the time and a display for a
timer.
Timer Display Clock Display
Press[MODE]toalternatebetweentheclockandtimer
display:
THE CLOCK
In clock display the unit will show the time. The time can
be displayed in a 12-hour or 24-hour format as hours,
minutes and seconds.
12-hour Display 24-hour Display
Tosetthecurrenttime:
1. Enter clock display.
Note: If the countdown timer is displayed, press
[MODE] to enter the clock mode.
2. In clock mode, press and hold [ MODE ] for two
seconds. The 12-hour value will flash.
3. Press [ ] to make a selection between 12-hour and
24-hour format.
4. Press [MODE] the hour digits will flash.
5. Press[ ] toadvancethenumbersuntiltheappropriate
hour digit is displayed.
Note: Holding down the button will increase the value
rapidly.

GB
4
6. Press [MODE], the minute digits will flash.
7. Again, press [ ] to advance the numbers until the
appropriate minute digit is displayed.
8. Press [MODE], the “seconds” will flash.
9. To adjust the “seconds” to zero, press [ ].
10.Press [MODE] to exit the setting mode.
The clock is now set.
Note: If no buttons are pressed for 60-seconds during
the clock-setting function, the unit will automatically
exit the clock-setting mode.
THE TIMER
Thetimercancountdownfromapre-settime.Theunitwill
countdownfromamaximumtimeof29-hours,59-minutes
to zero. In count-down timer mode, once the unit reaches
zero it will stop and an alarm will sound.
To indicate that the unit is in timer mode a [ ] timer icon
will be displayed .
Tosetthetimer:
1. Enter timer display.
Note:Ifthe clockis displayed,press [MODE]to enter
the timer mode.
2. Tosetthetimer,pressandhold[MODE]for2seconds.
The hour digits will flash.
3. Press [ ] to advance the hour digits to the desired
time.
4. Press [MODE] and the minute digits will flash.
5. Press [ ] to advance the minute digits to the desired
time.
The timer is now set.
Note: If no buttons are pressed for 60-seconds during
the timer-setting function, the unit will automatically
exit the timer-setting mode.

GB
5
Tostartthe timer:
-Press [ST / SP]. The timer will start.
Note:
-Whenthe timer reaches 0:00:00a beeping alarmwill
activate to indicate that the timer has completed its
cycle. The alarm will last for one (1) minute. After
one minute, the alarm will continue to make one
short beeping sound once every two-minutes. To
stop the alarm, press any button and the timer will
utomatically reset to the original timer setting.
-When the timer is active, the timer icon will appear
and be flashing on the pulse-mode display and the
clock display.
Tostopthe timer:
-Press [ST / SP]. The timer will pause until [ST / SP] is
pressed again.
Toclear the timer:
1. Press and hold [MODE]for 2-seconds. The digits will
return to zero and the hour digits will flash.
2. Withoutenteringanumberforthehours,press[MODE]
again. The Minute digits will flash.
3. Press [MODE] a final time to exit the timer-setting
mode.
The timer is now cleared.
To reset the timer to its originally set time:
-Press and hold [ST / SP] for 2-seconds. The display
will return to its originally set time.
MAINTENANCE
1. Do not immerse the unit in water. If the unit comes in
contact with water, dry it immediately with a soft
lintfree cloth.
2. Do not clean the unit with abrasive or corrosive
materials. Abrasive cleaning agents may scratch the
plastic parts and corrode the electronic circuit.
3. Do not subject the unit to excessive: force, shock,
dust, temperature, or humidity. Such treatment may
result in malfunction, a shorter electronic life span,
damaged batteries, or distorted parts.
4. Do not tamper with the unit’s internal components.
Doing so will terminate the unit’s warranty and may
cause damage. The unit contains no user-serviceable
parts.
5. Only use new batteries as specified in this instruction
manual.
6. Read this instruction manual thoroughly before
operating the unit.

GB
6
SPECIFICATIONS
Operatingmodes : Clock mode and timer mode
Real-time clock : 12 hour / 24 hour with hour, minute
and second display
Timer : Maximum, 29 hours, 59 minutes
Powersource : 1 x CR2032 3V lithium cell
Dimensions : 16 (D) x 56 (W) x 88 (L) mm
Weight : 37.5 g (approximate)
CAUTION
— The content of this manual is subject to change
without further notice.
— Due to printing limitation, the displays shown in
this manual may differ from the actual display.
— The contents of this manual may not be repro
duced without the permission of the manufacturer.

GB
7
Instruction Manual
****
Mode D'emploi
****
Bedienungsanleitung
****
Manuale di Istruzioni
****
Instrucciones de Funcionamiento
MODEL: PMP238N
PILLBOX TIMER WITH PULSEMETER