Orei 3X1 User manual

Specifications
Input ports 3 x HDMI
Output ports 1 x HDMI
Power indicator led 1 xLED
Signal indicator led 3xLED
Working temperature 0℃～60℃
Power supply DC5V/1A
Power consumption <5W
Dimension
Weight
Color Black
Items
· SPECIFICATION
160(L)×51.5(W)×20(H)mm
230g
HDMI Resolution 480i/480p/576i/576p/720p/1080i/1080p/
4K×2K@24/25/30/60Hz
HDMI Version Compatible with DVI1.0, HDMI1.4, HDMI2.0
HDCP Version Compatible with HDCP1.4, HDCP2.2
Video form Supports 12 bit full HD video, 3D video and
4K×2K@30/60Hz ultra HD video
Input and output
TMDS signal 0.7~1.2Vp-p
Input and output
DDC signal 5Vp-p
3X1 4K@60Hz PREMIUM HDMI SWITCH
UHD-301 User manual
4K X 2K
UHD
Audio Supports standard audio, DSD (Direct Stream
Digital and HD(HBR) audio
1. Connection
· INSTALLATION
Display
HDMI Switch
1. Connect the HDMI sources to the
HDMI Input of the HDMI Switch
2. Connect the display to the HDMI
output of the HDMI Switch
3. Connect the power adapter to the
HDMI Switch
4. You may select your input source
DC5V/ 1A via remote controller or
RS232
Q: No image at output?
A: 1) Check the power supply and make sure that the power light is on.
2) Check if the HDMI cables are connected well.
3) Make sure that the TV has been set up to the right HDMI input.
4) If connected to the PC or notebook via HDMI, please make sure the
output mode is mirror or extend.
Q: Display is unstable, splash screen, snowflakes or static audio?
A: 1) Check and make sure all connections are connected well.
2) Try to directly connect HDMI source to display, if it is the same issue,
Then please change the source device.
· FAQ
1. Baud rate: 9600bps
2.Order of RS232 serial port
1)HDMI 1 input： port0R
2)HDMI 2 input： port1R
3)HDMI 3 input： port2R
4)Power ON：poweronR
5)Power OFF：poweroffR
RS232 serial port operation illustration
Connection illustration
DVD
DVD
DVD
Disclaimer
The OREI brand is registered trademark.
Design and specifications of this unit are subject to change without prior notice.
Pictures are for reference only.Products may differ slightly from images shown.
3) Use high-quality HDMI 1.4 or HDMI 2.0 cable for transmitting
4K×2K UHD signal.

Switch Unit ×1 User Manual×1
· PACKAGE CONTENTS
5V/1A Power
Adapter×1
1. HDMI source device (computer graphics card, DVD Player, Gaming
Systems, HD monitoring equipment etc).
2. HDMI display device like SDTV, HDTV, and projector with HDMI port.
· INSTALLATION REQUIREMENT
· IMPORTANT SAFETY NOTES
Please read below safety instructions carefully before
installation and operation:
Please pay attention to all the warnings and hints on this device.
Do not expose this unit to rain, moisture and liquid.
Do not put anything into the device.
Signal link LED
Do not repair or open this device without professional guidance.
Ventilate the product to avoid overheating damage.
Disconnect from power and make sure it's safe before installation.
Do not plug-in/out the connected cables when in use.
Make sure the specification are equivalent when using 3rd party DC adapters.
Thank you for purchasing this product. For optimum performance and
safety, please read the instructions carefully and keep the manual for
future reference.
This 3×1 HDMI switch routes 3 different sources at resolution of up to
4K ×2K@60Hz ultra HD to a HDTV display. This unit has 3 HDMI inputs,
which makes it ideal for simultaneous connection of multiple HDMI
devices such as, Gaming System, Cable box, DVD etc. In addition, this
unit features an IR receivingwindow and RS232 port, which makes it is
easy and convenient to control the input signal as you need. It is perfect
for security system,media entertainment systems, conference exhibition
center and digital monitoring system etc.
• PRODUCT INTRODUCTION
1. Switch easily between any 3 HDMI sources
2. Supports resolution up to ultra HD 4K×2K@60Hz
3. Supports highest bandwidth up to 18Gpbs
4. Supports HDMI 3D
5. Supports IR control and RS232 control
6. Plug and play, easy to use
7. Excellent Compatibility
8. Metal heat sink design for stability
· FEATURES
· PANEL DESCRIPTION
· REMOTE CONTROLLER
is the power button.
”<”and “>”button, to switch sources.
“1-3”number buttons to select the source
as you need.
Remote controller
SE LE CT IO N
Power LED
Signal link LED
IR Window
HDMI Output
HDMI Input
RS232
Power Input
（5V/1A）