Orenco FT0822-14B-FSO User manual

Orenco Systems®, Inc., 814 Airway Ave., Sutherlin, OR 97479 USA • 800-348-9843 • 541-459-4449 • www.orenco.com NIN-FT-OVERFLOW-1
Rev. 3.0 ©04/17
Page 1 of 2
Effluent Filter Overflow Plate
Instructions
Assembly Instructions for FT0822-14B-FSO
Before You Begin...
The Effluent Filter Overflow Plate modifies 8-inch Orenco Systems®Biotube®
base-inlet effluent filters* to prevent effluent from bypassing the
filter if the filter becomes clogged.
To assemble, you will need a Phillips screwdriver.
Step 1: Slip the Overflow Plate onto the Sleeve
Slip the overflow plate onto the one-inch diameter sleeve attached to the
coupling.
* Covered by U.S. patents 4,439,323 and 5,492,635
1a
1b

Orenco Systems®, Inc., 814 Airway Ave., Sutherlin, OR 97479 USA • 800-348-9843 • 541-459-4449 • www.orenco.com
NIN-FT-OVERFLOW-1
Rev. 3.0 ©04/17
Page 2 of 2
Instructions
Step 2: Replace the Handle
Slip the handle onto the one-inch diameter sleeve above the overflow plate, and
tighten the stainless steel setscrew to hold the handle in place.
Step 3: Replace the Filter in the Housing
2a
2b
3