Orflo moxi z User manual

Mini Automated
Cell Counter
Quick Start Guide
To Perform a Count:
To Open a Saved Histogram:
* Disconnect USB cable while running samples.
Power ON. Insert Cassette
into Moxi.
Load 75µL sample on
Cassette. Touch Screen.
8 Sec
Touch
Histogram
Select
One Touch
Done
Touch
ReScale
Touch
Done
Touch
Done
To run 2nd
sample, reinsert
cassette on
other end.
OR
5/30/11 Rev 3.0 Made in USA
Touch
toToggle

1. If prompted to run MoxiChartInstall,
clickYes. Follow screen instructions.
OR
2. Open ORFLO DISK folder and run
MoxiChartInstall. Follow screen
instructions.
Mini Automated
Cell Counter
Quick Start Guide
To Adjust Settings:
Dec 16 14:03:00
System Settings
Time 17:05:18
Date May 23 2011
Scale Diameter
Cancel Done
Previous DecrementIncrement Next
To Obtain BlueTooth ID:
To Install MoxiChart Software on the MAC: To Install MoxiChart Software on the PC:
Use arrows to
adjust system
settings
Touch
Settings
Touch
Bluetooth
Touch
Back
Insert USB Flash
Drive into USB slot
on the MAC.
1. Open ORFLO DISK.
2. Double click MoxiChartInstallMac.dmg.
3. Drag MoxiChart Icon to Applications folder.
4. Run MoxiChart by double clicking MoxiChart Icon. Insert USB Flash
Drive into USB slot
on the PC.
www.oro.com 425.806.0002