Origin Acoustics DIRECTOR D69 User manual

DIRECTOR 6” SERIES SPEAKER MANUAL
DIRECTOR COLLECTION
TM
D69 D65D67 D63
D63DT|SUR D61DT D61-6 (6 PACK) D60-8 (8 PACK)

DIRECTOR COLLECTIONTM MANUAL • D60 SERIES

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 


DIRECTOR COLLECTIONTM MANUAL • D60 SERIES








  




DIRECTOR COLLECTIONTM MANUAL • D60 SERIES
MODEL D69 D67 D65
PART SCD60900 SCD60700 SCD60500
Tweeter   
Midrange   
Woofer   
Frequency Response   
Power RMS   
Power Peak   
Impedance   
Mounting Depth 5 1/4” (134mm) 5 1/4” (134mm) 5 1/4” (134mm)

SPECIFICATIONS ALL 6'' SERIES
Cutout Diameter 8 ” (222mm)
Speaker Diameter 9 ” (244mm)
Grille Diameter 10” (254mm)
Grille Depth ” (5mm)
MODEL D63 D63 DT/SUR D61 DT
PART SCD60300 SCD2T60300 SCD2T60100
Tweeter   
Midrange   
Woofer   
Frequency Response   
Power RMS   
Power Peak   
Impedance   
Mounting Depth 3 1/2” (89mm) 3 15/16” (101mm) 4 5/8” (117mm)


DIRECTOR COLLECTIONTM MANUAL • D60 SERIES
*All product specifications are subject to change. Please refer to the dealer portal for the latest information.
MODEL D61-6 D60-8
PART SCD60100 SCD60000
Tweeter  
Midrange  
Woofer  
Frequency Response  
Power RMS  
Power Peak  
Impedance  
Mounting Depth 3 1/2” (89mm) 3 5/8” (92mm)

DIRECTOR COLLECTION
DIRECTOR 10”| 8” & 6” LOUDSPEAKERS
SPECIFICATIONS
Please visit docs.originacoustics.com or scan this QR code using your smart device for the
most up to date safety information and use instructions for this product.
*All warranties and warranty conditions are subject to change. Please
refer to docs.originacoustics.com for the latest information.
ALL 10'' SERIES
10 3/8” (264mm)
11 ” (286mm)
11 ” (299mm)
” (5mm)
SPECIFICATIONS
CutoutDiameter
SpeakerDiameter
GrilleDiameter
GrilleDepth
ALL 8'' & 6'' SERIES
8 ” (222mm)
9 ” (244mm)
10” (254mm)
” (5mm)
SPECIFICATIONS
CutoutDiameter
SpeakerDiameter
GrilleDiameter
GrilleDepth
OriginAcoustics
ORIG I N®
ACOUS T I C S
111/2in
286mm
113/4in
299mm
61/4in
158mm
103/8in
264mm
OriginAcoustics
ORIG I N®
ACOU S T I C S
10in
254mm
95/8in
244mm
222mm
83/4in
51/4in
133mm
41/8in
105mm
SPEAKER
Speaker Bayonet Ring Grille Template
D80 & D60 Series
Director Collection
When you have decided on the location for the speaker, trace this template lightly in pencil
where the hole should be. If unsure on whether there may or may not be studs where the
planned speakers are located, use a keyhole or drywall saw to drill a ⅛” hole in the center
of the template, then insert a bent coat hanger through the hole to feel for obstructions.
Cut-Out Template: 8 3/4” (222mm)
www.originacoustics.com
[email protected]
844.674.4461
8:00AM - 5:00PM (PT) Mon - Fri
Speaker Bayonet Ring Grille Template
CUT-OUT TEMPLATEBAYONET RING GRILLE START GUIDE


DIRECTOR COLLECTIONTM MANUAL • D60 SERIES





D
D
A
A
A
C
B
A
A
A
B


DIRECTOR COLLECTIONTM MANUAL • D60 SERIES
)

)
)
)


D
D
A
A
B
A
A


DIRECTOR COLLECTIONTM MANUAL • D60 SERIES
54
DIRECTOR COLLECTIONTM MANUAL • 10'' SERIESDIRECTOR COLLECTIONTM MANUAL • 10'' SERIES
A) METAL RING - LOCK Locks speaker into place inside Bayonet Ring. (Move
outwards from the Bayonet Ring to release speaker. Move inwards to Lock.)
B) TWEETER
C) MID-RANGE
D) DUAL TWEETER
• D101
B
A
A
D
F
B
BZ68 2019
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S
O R I G I N
®
BZ68 2019
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S
O R I G I N
®
C
E
4b. Bayonet Ring Features
• Drywall Saw
• Speaker Wire
• Pencil
• Wire Stripper
• Measuring Tape
• Drill
• Drill Bit ⅛” (3mm)
• Stiff Wire
• Stud Finder
• Fish Tape
• Spray Paint
• Compressed Air
5. Required Tools
The gauge of wire used can have an impact on the performance of your speakers.
Use a multi-stranded wiring designed for amplifier to speaker connections. Which
gauge to select depends on the length of wire to be used on any particular speaker.
The longer your run is, the larger your wire size must be.
6. Recommended Speaker Wire
Wire Length Wire Gauge
0 -100’ (0 - 30m) 16
50 - 150’ (15 - 45m) 14
Over 100’ (30m) 12
A) BAYONET RING To be inserted within in-ceiling hole
B) METAL RING - LOCK cks speaker into place inside Bayonet Ring. (Move
outwards from the Bayonet Ring to release speaker. Move inwards to Lock.)
C) BAYONET RAILS The Zip-KlipsTM Grips are raised & lowered along these rails.
D) ZIP - KLIPTM GRIPS Provide secure grip against drywall. With 2 finger grooves
to pull down and lower. Zip-Klip™ Mounting System (Patent #9591390).
E) RELEASE TABS Press BLACK tabs inwards to release grip and raise Zip-KlipTM.
F) LOCK GROOVES Used to ALIGN & LOCK speaker inside Bayonet Ring.
A
)
)

)
)

)
)


DIRECTOR COLLECTIONTM MANUAL • D60 SERIES
54
DIRECTOR COLLECTIONTM MANUAL • 10'' SERIESDIRECTOR COLLECTIONTM MANUAL • 10'' SERIES
A) METAL RING - LOCK Locks speaker into place inside Bayonet Ring. (Move
outwards from the Bayonet Ring to release speaker. Move inwards to Lock.)
B) TWEETER
C) MID-RANGE
D) DUAL TWEETER
• D101
B
A
A
D
F
B
BZ68 2019
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S
O R I G I N
®
BZ68 2019
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S
O R I G I N
®
C
E
4b. Bayonet Ring Features
• Drywall Saw
• Speaker Wire
• Pencil
• Wire Stripper
• Measuring Tape
• Drill
• Drill Bit ⅛” (3mm)
• Stiff Wire
• Stud Finder
• Fish Tape
• Spray Paint
• Compressed Air
5. Required Tools
The gauge of wire used can have an impact on the performance of your speakers.
Use a multi-stranded wiring designed for amplifier to speaker connections. Which
gauge to select depends on the length of wire to be used on any particular speaker.
The longer your run is, the larger your wire size must be.
6. Recommended Speaker Wire
Wire Length Wire Gauge
0 -100’ (0 - 30m) 16
50 - 150’ (15 - 45m) 14
Over 100’ (30m) 12
A) BAYONET RING To be inserted within in-ceiling hole
B) METAL RING - LOCK cks speaker into place inside Bayonet Ring. (Move
outwards from the Bayonet Ring to release speaker. Move inwards to Lock.)
C) BAYONET RAILS The Zip-KlipsTM Grips are raised & lowered along these rails.
D) ZIP - KLIPTM GRIPS Provide secure grip against drywall. With 2 finger grooves
to pull down and lower. Zip-Klip™ Mounting System (Patent #9591390).
E) RELEASE TABS Press BLACK tabs inwards to release grip and raise Zip-KlipTM.
F) LOCK GROOVES Used to ALIGN & LOCK speaker inside Bayonet Ring.
A


DIRECTOR COLLECTIONTM MANUAL • D60 SERIES


 














              



0.25 - 0.5”
(6 - 12mm)
Speaker
Wire


DIRECTOR COLLECTIONTM MANUAL • D60 SERIES





• 
      
   

    

• 


•



•


         


• 


DIRECTOR COLLECTIONTM MANUAL • D60 SERIES
The Dual Tweeter models may be used for either one channel (surround) or two
channels (stereo), depending on the model.
• Stereo: ( Models)
In this mode, two channels are fed into the speaker: one channel for each tweeter.
This setup is ideal for small rooms such as walk-in closets and bathrooms, as well
as oddly-shaped areas such as hallways. With both le and right channels in one
speaker, only one speaker is needed in smaller rooms. In areas like hallways, both
channels can be evenly distributed throughout the area with multiple speakers.
• Surround (Dipole): Available ONLY on 
A switch is located on the back of the speaker to select which mode to use. The
input labeled for surround is the input that should be used if you’re only using
one channel. In this mode, one channel is fed into both tweeters to be distributed
throughout the area. This way in a multiple-speaker setup, one speaker can be a
dedicated le speaker and another a dedicated right.
7c. Dual Tweeter Installation Guidance
If you are using a dual tweeter speaker in stereo mode (i.e. there are two wires
connected to the speaker: one for the le channel and one for the right), do not
set the switch to surround mode. This could damage the amplifier.
WARNING


DIRECTOR COLLECTIONTM MANUAL • D60 SERIES
     
     

     
     
 
     


     
      
    
     



Listening Area
TV
6’ (2m)
3’ (1m)3’ (1m)
Listening Area
TV
6’ (2m)
3’ (1m)3’ (1m)
3’
(1m)





DIRECTOR COLLECTIONTM MANUAL • D60 SERIES
             









The Speaker will arrive securely in its Bayonet Ring. To release the speaker,
follow these steps:


, 



DIRECTOR COLLECTIONTM MANUAL • D60 SERIES
1a 

Twist Speaker
15ᵒ
Counter - Clockwise
to Unlock
3
Li Speaker
out of
Bayonet
Ring
QUICK START GUIDE
REMOVAL OF SPEAKER FROM BAYONET RING
 
 from the Bayonet Ring, before
removing loudspeaker from Bayonet Ring.
 
 will release the Speaker
from the Bayonet Ring.
D109 install
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S
O R I G I N
®
The Speaker will arrive securely in its Bayonet Ring. Scan the QR Code
on the reverse of this page for full instructions for this product.


Note: If the Bayonet Zip-ClipsTM need
to be adjusted or removed, depress the
metal tabs along the rail and push up.
SPEAKER INSTALLATION
Push the Zip-Clip™ rails inwards from the
top, just enough, so they fit throughthe
ceiling hole opening,then
 hole
within the ceiling surface.
To finalize the
installation, 
the Bayonet Ring.
Note: Grille may not sit flush until this
Lock is properly engaged.

until the indicators on both the Bayonet
Ring & the Speaker are aligned.
Aer connecting wires, insert the Speaker
into the Bayonet Ring, with the 







D109 install
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S
O R I G I N
®


A
B 1
2 3
456
 on all 4 Bayonet Zip-
ClipsTM to lower them along the Bayonet
rails.
PUSH Rails
Inwards
to Fit
through
Ceiling Hole
Reach through and 
 of the Bayonet
Zip-ClipTM to pull each Zip-ClipTM down
the rail.
01-17-23
6975 S Decatur Blvd, Las Vegas, NV 89118 • www.originacoustics.com • 844-674-4461
©2023 Origin Acoustics. All copyrighted, trademarked and patented elements mentioned herein are the sole property of Origin Acoustics.
1b
Twist Speaker
15ᵒ
Counter - Clockwise
to Unlock
3
Li Speaker
out of
Bayonet
Ring
QUICK START GUIDE
REMOVAL OF SPEAKER FROM BAYONET RING
 
 from the Bayonet Ring, before
removing loudspeaker from Bayonet Ring.
 
 will release the Speaker
from the Bayonet Ring.
D109 install
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S
O R I G I N
®
The Speaker will arrive securely in its Bayonet Ring. Scan the QR Code
on the reverse of this page for full instructions for this product.


Note: If the Bayonet Zip-ClipsTM need
to be adjusted or removed, depress the
metal tabs along the rail and push up.
SPEAKER INSTALLATION
Push the Zip-Clip™ rails inwards from the
top, just enough, so they fit throughthe
ceiling hole opening,then
 hole
within the ceiling surface.
To finalize the
installation, 
the Bayonet Ring.
Note: Grille may not sit flush until this
Lock is properly engaged.

until the indicators on both the Bayonet
Ring & the Speaker are aligned.
Aer connecting wires, insert the Speaker
into the Bayonet Ring, with the 







D109 install
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S
O R I G I N
®


A B 1
2 3
456
 on all 4 Bayonet Zip-
ClipsTM to lower them along the Bayonet
rails.
PUSH Rails
Inwards
to Fit
through
Ceiling Hole
Reach through and 
 of the Bayonet
Zip-ClipTM to pull each Zip-ClipTM down
the rail.
01-17-23
6975 S Decatur Blvd, Las Vegas, NV 89118 • www.originacoustics.com • 844-674-4461
©2023 Origin Acoustics. All copyrighted, trademarked and patented elements mentioned herein are the sole property of Origin Acoustics.


, 



Twist Speaker
15ᵒ
Counter - Clockwise
to Unlock
3
Li Speaker
out of
Bayonet
Ring
QUICK START GUIDE
REMOVAL OF SPEAKER FROM BAYONET RING
 
 from the Bayonet Ring, before
removing loudspeaker from Bayonet Ring.
 
 will release the Speaker
from the Bayonet Ring.
D109 install
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S
O R I G I N
®
The Speaker will arrive securely in its Bayonet Ring. Scan the QR Code
on the reverse of this page for full instructions for this product.


Note: If the Bayonet Zip-ClipsTM need
to be adjusted or removed, depress the
metal tabs along the rail and push up.
SPEAKER INSTALLATION
Push the Zip-Clip™ rails inwards from the
top, just enough, so they fit throughthe
ceiling hole opening,then
 hole
within the ceiling surface.
To finalize the
installation, 
the Bayonet Ring.
Note: Grille may not sit flush until this
Lock is properly engaged.

until the indicators on both the Bayonet
Ring & the Speaker are aligned.
Aer connecting wires, insert the Speaker
into the Bayonet Ring, with the 







D109 install
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S
O R I G I N
®


A B 1
2 3
456
 on all 4 Bayonet Zip-
ClipsTM to lower them along the Bayonet
rails.
PUSH Rails
Inwards
to Fit
through
Ceiling Hole
Reach through and 
 of the Bayonet
Zip-ClipTM to pull each Zip-ClipTM down
the rail.
01-17-23
6975 S Decatur Blvd, Las Vegas, NV 89118 • www.originacoustics.com • 844-674-4461
©2023 Origin Acoustics. All copyrighted, trademarked and patented elements mentioned herein are the sole property of Origin Acoustics.


DIRECTOR COLLECTIONTM MANUAL • D60 SERIES
Twist Speaker
15ᵒ
Counter - Clockwise
to Unlock
3
Li Speaker
out of
Bayonet
Ring
QUICK START GUIDE
REMOVAL OF SPEAKER FROM BAYONET RING
 
 from the Bayonet Ring, before
removing loudspeaker from Bayonet Ring.
 
 will release the Speaker
from the Bayonet Ring.
D109 install
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S
O R I G I N
®
The Speaker will arrive securely in its Bayonet Ring. Scan the QR Code
on the reverse of this page for full instructions for this product.


Note: If the Bayonet Zip-ClipsTM need
to be adjusted or removed, depress the
metal tabs along the rail and push up.
SPEAKER INSTALLATION
Push the Zip-Clip™ rails inwards from the
top, just enough, so they fit throughthe
ceiling hole opening,then
 hole
within the ceiling surface.
To finalize the
installation, 
the Bayonet Ring.
Note: Grille may not sit flush until this
Lock is properly engaged.

until the indicators on both the Bayonet
Ring & the Speaker are aligned.
Aer connecting wires, insert the Speaker
into the Bayonet Ring, with the 







D109 install
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S
O R I G I N
®


A B 1
2
3
456
 on all 4 Bayonet Zip-
ClipsTM to lower them along the Bayonet
rails.
PUSH Rails
Inwards
to Fit
through
Ceiling Hole
Reach through and 
 of the Bayonet
Zip-ClipTM to pull each Zip-ClipTM down
the rail.
01-17-23
6975 S Decatur Blvd, Las Vegas, NV 89118 • www.originacoustics.com • 844-674-4461
©2023 Origin Acoustics. All copyrighted, trademarked and patented elements mentioned herein are the sole property of Origin Acoustics.
Twist Speaker
15ᵒ
Counter - Clockwise
to Unlock
3
Li Speaker
out of
Bayonet
Ring
QUICK START GUIDE
REMOVAL OF SPEAKER FROM BAYONET RING
 
 from the Bayonet Ring, before
removing loudspeaker from Bayonet Ring.
 
 will release the Speaker
from the Bayonet Ring.
D109 install
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S
O R I G I N
®
The Speaker will arrive securely in its Bayonet Ring. Scan the QR Code
on the reverse of this page for full instructions for this product.


Note: If the Bayonet Zip-ClipsTM need
to be adjusted or removed, depress the
metal tabs along the rail and push up.
SPEAKER INSTALLATION
Push the Zip-Clip™ rails inwards from the
top, just enough, so they fit throughthe
ceiling hole opening,then
 hole
within the ceiling surface.
To finalize the
installation, 
the Bayonet Ring.
Note: Grille may not sit flush until this
Lock is properly engaged.

until the indicators on both the Bayonet
Ring & the Speaker are aligned.
Aer connecting wires, insert the Speaker
into the Bayonet Ring, with the 







D109 install
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S
O R I G I N
®


A B 1
2
3
456
 on all 4 Bayonet Zip-
ClipsTM to lower them along the Bayonet
rails.
PUSH Rails
Inwards
to Fit
through
Ceiling Hole
Reach through and 
 of the Bayonet
Zip-ClipTM to pull each Zip-ClipTM down
the rail.
01-17-23
6975 S Decatur Blvd, Las Vegas, NV 89118 • www.originacoustics.com • 844-674-4461
©2023 Origin Acoustics. All copyrighted, trademarked and patented elements mentioned herein are the sole property of Origin Acoustics.
Twist Speaker
15ᵒ
Counter - Clockwise
to Unlock
3
Li Speaker
out of
Bayonet
Ring
QUICK START GUIDE
REMOVAL OF SPEAKER FROM BAYONET RING
 
 from the Bayonet Ring, before
removing loudspeaker from Bayonet Ring.
 
 will release the Speaker
from the Bayonet Ring.
01-17-23
6975 S Decatur Blvd, Las Vegas, NV 89118 • www.originacoustics.com • 844-674-4461
©2023 Origin Acoustics. All copyrighted, trademarked and patented elements mentioned herein are the sole property of Origin Acoustics.
D109 install
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S
O R I G I N
®
The Speaker will arrive securely in its Bayonet Ring. Scan the QR Code
on the reverse of this page for full instructions for this product.


Note: If the Bayonet Zip-ClipsTM need
to be adjusted or removed, depress the
metal tabs along the rail and push up.
SPEAKER INSTALLATION
Push the Zip-Clip™ rails inwards from the
top, just enough, so they fit throughthe
ceiling hole opening,then
 hole
within the ceiling surface.
To finalize the
installation, 
the Bayonet Ring.
Note: Grille may not sit flush until this
Lock is properly engaged.

until the indicators on both the Bayonet
Ring & the Speaker are aligned.
Aer connecting wires, insert the Speaker
into the Bayonet Ring, with the 







D109 install
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S
O R I G I N
®


A B
1
2 3
456
 on all 4 Bayonet Zip-
ClipsTM to lower them along the Bayonet
rails.
Reach through and 
 of the Bayonet
Zip-ClipTM to pull each Zip-ClipTM down
the rail.
     
     
      
    


     
      
     

    
      







DIRECTOR COLLECTIONTM MANUAL • D60 SERIES
Twist Speaker
15ᵒ
Counter - Clockwise
to Unlock
3
Li Speaker
out of
Bayonet
Ring
QUICK START GUIDE
REMOVAL OF SPEAKER FROM BAYONET RING
 
 from the Bayonet Ring, before
removing loudspeaker from Bayonet Ring.
 
 will release the Speaker
from the Bayonet Ring.
D109 install
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S
O R I G I N
®
The Speaker will arrive securely in its Bayonet Ring. Scan the QR Code
on the reverse of this page for full instructions for this product.


Note: If the Bayonet Zip-ClipsTM need
to be adjusted or removed, depress the
metal tabs along the rail and push up.
SPEAKER INSTALLATION
Push the Zip-Clip™ rails inwards from the
top, just enough, so they fit throughthe
ceiling hole opening,then
 hole
within the ceiling surface.
To finalize the
installation, 
the Bayonet Ring.
Note: Grille may not sit flush until this
Lock is properly engaged.

until the indicators on both the Bayonet
Ring & the Speaker are aligned.
Aer connecting wires, insert the Speaker
into the Bayonet Ring, with the 







D109 install
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S
O R I G I N
®


A B 1
2 3
456
 on all 4 Bayonet Zip-
ClipsTM to lower them along the Bayonet
rails.
PUSH Rails
Inwards
to Fit
through
Ceiling Hole
Reach through and 
 of the Bayonet
Zip-ClipTM to pull each Zip-ClipTM down
the rail.
01-17-23
6975 S Decatur Blvd, Las Vegas, NV 89118 • www.originacoustics.com • 844-674-4461
©2023 Origin Acoustics. All copyrighted, trademarked and patented elements mentioned herein are the sole property of Origin Acoustics.
PUSH Rails
Inwards
to Fit
through
Ceiling Hole
LI
F
Zi
p
A
2b2a
**
LIFT UP
A





*
 


DIRECTOR COLLECTIONTM MANUAL • D60 SERIES
   
   




Speaker
Wire
Terminal Connectors



 



DIRECTOR COLLECTIONTM MANUAL • D60 SERIES
, 

 



2a 
1

1. Fit into Ring
2. Twist into Ring
1. Fit into Ring
2. Twist into Ring
D69 install
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S
O R I G I N
®
360° Aimable
Mid-Range & Tweeter
1. Fit into Ring
2. Twist into Ring


DIRECTOR COLLECTIONTM MANUAL • D60 SERIES
 
,  
. 

2b 
3

GRILLE MAY NOT SIT FLUSH UNTIL THIS LOCK IS PROPERLY ENGAGED.
Twist Speaker
15ᵒ
Counter - Clockwise
to Unlock
3
Li Speaker
out of
Bayonet
Ring
QUICK START GUIDE
REMOVAL OF SPEAKER FROM BAYONET RING
 
 from the Bayonet Ring, before
removing loudspeaker from Bayonet Ring.
 
 will release the Speaker
from the Bayonet Ring.
D109 install
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S
O R I G I N
®
The Speaker will arrive securely in its Bayonet Ring. Scan the QR Code
on the reverse of this page for full instructions for this product.


Note: If the Bayonet Zip-ClipsTM need
to be adjusted or removed, depress the
metal tabs along the rail and push up.
SPEAKER INSTALLATION
Push the Zip-Clip™ rails inwards from the
top, just enough, so they fit throughthe
ceiling hole opening,then
 hole
within the ceiling surface.
To finalize the
installation, 
the Bayonet Ring.
Note: Grille may not sit flush until this
Lock is properly engaged.

until the indicators on both the Bayonet
Ring & the Speaker are aligned.
Aer connecting wires, insert the Speaker
into the Bayonet Ring, with the 







D109 install
SCALE:1:2
Origin Acoustics
6975 S Decatur Blvd
Suite 140
Las Vegas, NV 89118
844-ORIGIN1 (674-4461)
www.originacoustics.com
A C O U S T I C S
O R I G I N
®


A B 1
2 3
456
 on all 4 Bayonet Zip-
ClipsTM to lower them along the Bayonet
rails.
PUSH Rails
Inwards
to Fit
through
Ceiling Hole
Reach through and 
 of the Bayonet
Zip-ClipTM to pull each Zip-ClipTM down
the rail.
01-17-23
6975 S Decatur Blvd, Las Vegas, NV 89118 • www.originacoustics.com • 844-674-4461
©2023 Origin Acoustics. All copyrighted, trademarked and patented elements mentioned herein are the sole property of Origin Acoustics.