Cosmo Table Light
The Cosmo collection includes pendant and table lights with a shortened, semisphere shade.
Available in ribbed prismatic glass or bone china with either a plain, dimpled or stepped finish, the
textural shades take on a new dimension when lit, creating beautiful shadows.
FT448 Plain
FT449 Stepped
FT450 Dimpled
FT451 Prismatic
230V ac 50Hz AssemblyIP20
Safety Instructions
Cleaning and Maintenance
These instructions are provided for your safety in order to prevent the risk of Fire, Electric shock or
Injury. Please retain for future reference. When fitting is in operation, some parts will become hot;
take care when using/handling.
- Ensure the lamp type and max wattage is followed- do not exceed. Take care not to overtighten
lamp.
- Do not touch the lamp (bulb) or lamp holder while in operation, as both become very hot.
- Turn off and unplug fitting, leaving lamp to cool before changing lamp. Dispose of old lamps
carefully.
- Adjust light fitting only when power to the fitting is off and has been left to cool.
- Never leave a fitting without a lamp in position.
- Keep light fitting away from combustible materials such as soft furnishings.
- Ensure children do not play with the light fitting.
- Ensure the light is positioned on a solid, level and non-slip surface and make sure the position of
the cable does not pose a trip hazard.
- If the electrical flex or electrical components become damaged at any point, the fitting must be
unplugged from the power supply immediately and not operated until the damaged parts are
fixed/replaced.
- For use in a dry, indoor environment only. Ensure the fitting does not come into contact with any
liquids.
Metal finishes should only be cleaned with a soft, dry cloth. Do not use polishes or abrasives. Bone
china can be cleaned by hand, using a soft damp cloth with a diluted mild detergent (nonabrasive) if
necessary. Switch off power to the fitting before cleaning.
Cosmo Table- Plain/Stepped/Dimpled Cosmo Table- Prismatic
A
C
D
B
E
Cosmo Table- Plain/Stepped/Dimpled
- Place the nylon washer (C) on top of the bracket (D), then place the shade on to the washer/bracket, so that
the top hole lines up centrally with the washer and bracket.
- Hold the shade in position, before placing the thread of the cap (A) through the hole of the shade and
washer, before screwing firmly into top of bracket to secure the shade in place. Do not overtighten cap.
Cosmo Table- Prismatic
- Place one metal washer (F) on top of the bracket (D), then place the shade on to the washer/bracket, so that
top hole lines up centrally with both the washer and bracket.
- Hold the shade in position, then place the second metal washer on top of the shade before placing the
thread of the cap (A) through the hole of the shade and washer, before screwing firmly into top of bracket to
secure the shade in place. Do not overtighten cap.
Cap
Shade
Nylon Washer (Bone China version)
A
B
C
Bracket
Table stem/Base
Metal Washer* (Prismatic version)
D
E
F
F
F
E14 CANDLE
40W MAX
11W
n/a
7W
60W MAX
13W
n/a
9W
Cosmo Table Light
BALL
LAMP GUIDANCE
TYPE* WATTAGE**
BASE SHAPE
ü
ü
û
ü
INCANDESCENT
CFL
ECO-HALOGEN
LED
FT448/FT449/FT450 FT451
* Warm white (2700k) low energy lamps recommended.
** Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
