Hatton 4 Table Light
FT566 Hatton 4 Table Light
230V ac 50Hz IP20
Safety Instructions
Cleaning and Maintenance
These instructions are provided for your safety in order to prevent the risk of Fire, Electric shock or
Injury. Please retain for future reference. When fitting is in operation, some parts will become hot;
take care when using/handling.
- Ensure the lamp type and max wattage is followed- do not exceed. Take care not to overtighten
lamp.
- Do not touch the lamp (bulb) or lamp holder while in operation, as both become very hot.
- Turn off and unplug fitting, leaving lamp to cool before changing lamp. Dispose of old lamps
carefully.
- Adjust light fitting only when power to the fitting is off and has been left to cool.
- Never leave a fitting without a lamp in position.
- Keep light fitting away from combustible materials such as soft furnishings.
- Ensure children do not play with the light fitting.
- Ensure the light is positioned on a solid, level and non-slip surface and make sure the position of
the cable does not pose a trip hazard.
- If the electrical flex or electrical components become damaged at any point, the fitting must be
unplugged from the power supply immediately and not operated until the damaged parts are
fixed/replaced.
- For use in a dry, indoor environment only. Ensure the fitting does not come into contact with any
liquids.
Metal finishes should only be cleaned with a soft, dry cloth. Do not use polishes or abrasives. Bone
china can be cleaned by hand, using a soft damp cloth with a diluted mild detergent (nonabrasive) if
necessary. Switch off power to the fitting before cleaning.
A unique style Table Light with a beautiful multi faceted bone china shade. The Hatton’s chrome base
and black cotton braided cable provide a contemporary and authentic edge.
When handling the light, always support from below - do not lift from the shade.
!
Lamp assembly
Finial
Locator disc
1. Insert the bulb into the
lampholder. If using a tall bulb,
the shade holder can be moved
upwards if necessary by rotating
the shade rings.
2. Unscrew the knurled finial and
locator disc from the top of the
shade holder
3. Locate the shade over the
threaded top of the shade holder
4. Position the locator disc on top
of the shade and gently screw
down the finial onto the shade
holder
Shade
Shade holder
bulb
shade rings
E27 GLS
LAMP GUIDANCE
TYPE* WATTAGE**
BASE SHAPE
ü
ü
ü
ü
INCANDESCENT
CFL
ECO-HALOGEN
LED
100W MAX
18W
70W
12W
* Warm white (2700k) low energy lamps recommended.
** Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
BALL
