Original BTC BEATA HEUMAN Alma FT701 User manual

Alma
Instruction Manual
Table Light
MADE IN BRITAIN
ORIGINALBTC.COM
[phone]
UNIT 21 / 22 AVENUE ONE, STATION LANE, WITNEY, OX28 4XZ, ENGLAND
Established in 1990, Original BTC manufactures relaxed, familiar lighting for traditional and
contemporary homes.
All products are hand-assembled in Oxfordshire from high quality components, produced in the UK.
Cleaning & Maintenance
These instructions are provided for your safety in order to prevent the risk of Fire, Electric shock or
Injury. Please retain for future reference. When fitting is in operation, some parts may become hot;
take care when using/handling.
- Ensure the lamp type and max wattage is followed - do not exceed. Take care not to overtighten
lamp.
- Do not touch the lamp or lamp holder while in operation, as both may become hot.
- Turn off and unplug fitting, leaving lamp to cool before changing lamp. Dispose of old lamps
carefully.
- Adjust light fitting only when power to the fitting is off and has been left to cool.
- Never leave a fitting without a lamp in position.
- Keep light fitting away from combustible materials such as soft furnishings.
- Ensure children do not play with the light fitting.
- Ensure the light is positioned on a solid, level and non-slip surface and make sure the position of
the cable does not pose a trip hazard.
- If the external flexible cable or cord of this luminaire is damaged, it shall exclusively be replaced by
the manufacturer or his service agent, or a similar qualified person, in order to avoid a hazard.
- For use in a dry, indoor environment only. Ensure the fitting does not come into contact with any
liquids.
All brass components can be cleaned with a metal polish to remove tarnishing with the exception of
the flexible arm. Do not use polishes or abrasives on the flexible arm as this may
compromise the fittings ability to maintain its shade position. Bone china can be cleaned
by hand, with a soft damp cloth with a diluted, mild detergent (nonabrasive) if necessary. Switch off
power to the fitting before cleaning.
When handling the light, always support from below - do not lift from the bone china shade.
!
FT701
v1.3-10.22
Safety & Installation Instructions

Alma Table Light
Alma Table Light Natural
Alma Table Light Coral
Alma Table Light Seaweed
FT701N
FT701R
FT701G
230V AC 50Hz IP20
* Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used. 2700K (warm white) recommended.
** Dimming performance dependant upon lamp used.
GLSE27
LAMP GUIDANCE : NB lamp not included
TYPE WATTAGE* BASE SHAPE
Bone china shade installation
LED** 6W (recommended)
Incandescent 40W Max
PLEASE READ THE INSTRUCTIONS ON THE REVERSE BEFORE YOU BEGIN INSTALLING YOUR LIGHT
21 4
3
Contents
Assembly Instructions
Contents
1
2
3
4
Main body
Shade
Brass shade ring
Brass shade disc
STEP 1 - Insert the shade (2) over the lampholder.
STEP 2 - Insert the brass shade disc (4) over the lampholder. It will sit inside the shade.
STEP 3 - Screw the brass shade ring (3) onto the lampholder. It will push against the brass shade disc and hold the shade
in position.
Refer to the diagram on the opposite page and read the Safety & Installation instructions overleaf.
Take care when handling ceramic products during installation.
2
4
3
1