ORION Images R4NDHDN Series User manual

All contents of this document may change without prior notice, and actual product appearance may differ from that depicted herein
USER
MANUAL
4K Ultra High Definition Professional Monitor
R4NDHDN Series

R01 2
<TABLE OF CONTENTS>
1 SAFETY INSTRUCTION 3
2 FCC RF INTERFERENCE STATEMENT 7
3 INSTALLATION 8
4 OSD MENU 14
5 SPECIFICATION 20
6 TROUBLESHOOTING 22
[ USER MANUAL ]

R01 3
•Follow this safety instruction to use the monitor properly and prevent the damage.
•Keep this user’s guide book for later use.
1. SAFETY INSTRUCTION
* This safety instruction has “Warning” & “Caution” as below
Warning - If the user does not follow this instruction,
it may cause the serious damage to the user.
Caution - If the user does not follow this instruction, it may cause the slight
damage to the user or cause some damages to the monitor.
Warning
Never remove the back cover and touch
the inside of the monitor.
If you need a service, please contact the
service center.
Keep away the monitor from the
direct sunlight and a heating appliance.
Never put objects of any kind into this
product as they may result in a risk of fire
or electric shock.
Connect the power cord to the wall
outlet tightly. If the power cord or plug are
defective and the wall outlet is not
tight, please do not use them.
[ USER MANUAL ]

R01 4
Warning
Do not install this monitor on the outside
and near water. It may cause damage to
the product, electric shock and fire.
When lightning and thundering, unplug
the monitor from the wall outlet and
never touch it.
Unplug this product from the wall outlet,
when it does not operate for a long time.
When smoking and noising from the
monitor, unplug the product from the wall
outlet and contact a service center.
WARNING: How to fix
Do not open this product as it contains high voltage inside.
It may create an electric shock.
If the user disassembles and remove the back cover, it does not make sure
to make up for the damage and do a service and exchange the monitor.
For cleaning do not use liquid cleaners.
Never touch the power plug with wet-
hands.
[ USER MANUAL ]

R01 5
Cautions
Install this monitor some distance
from the wall and do not install unless
proper ventilation is provided.
Place this product on a stable place.
If not, it may fall, causing serious
damages to the monitor and people.
The openings must not be blocked by
curtain, rug or other similar surface.
Before carrying the monitor, turn it off and
unplug the signal cables and the power
cord from the wall outlet.
When carrying this monitor, be careful
not to damage the panel and drop it
It may cause some trouble.
Take the power plug out from the wall
outlet.
Do not pull the cable. It may snap the
inner-wires and cause overheating and fire.
[ USER MANUAL ]

R01 6
Cautions
Install this monitor about 50cm far from
the eyes and an angle of 0~15 degrees
below eyes. Too close installation may
cause having weak sight.
Do not press the LCD panel with hands or
the sharpened material hardly.
For cleaning, unplug the monitor from the
wall outlet. Do net use the liquid cloth.
Use the soft cloth.
Do not use the chemical liquid for cleaning.
It may cause fading and breakage.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR WATER.
Instructions for Disposal of Electrical and Electronic Equipment in Private Households
Disposal of used Electrical and Electronic Equipment
(Applicable in the European Union and other European countries with garbage separate
disposal and collection methods)
This symbol on the product, or in the related documents in the package, indicates that this
product shall not be treated as normal household waste. Instead, it should be taken to a proper
applicable collection point or depot for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent possible negative consequences for
the environment and human health, which could otherwise be caused by inappropriate waste handling of
this product. The recycling of materials will help to conserve natural resources.
For more detailed information about recycling of this product, please contact your local city authority,
your household waste disposal service or the place where you purchased the product.
[ USER MANUAL ]

R01 7
NOTE
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio, TV technician for help.
- Only shielded interface cable should be used.
Finally, any changes or modifications to the equipment by the user not expressly approved by the grantee or
manufacturer could void the users authority to operate such equipment.
DOC COMPLIANCE NOTICE
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out
in the radio interference regulation of Canadian Department of communications.
2. FCC RF INTERFERENCE STATEMENT
[ USER MANUAL ]

R01 8
3.1 UNPACKING
Remove the package cover and place the product on a flat and secure surface or in the installation location.
This equipment should be unpacked and handled with care. If an item appears to have been damaged
in shipment, notify the shipper immediately. Check whether all the following device and accessories are
included with the main system. If any items are missing, notify your Sales or Customer Service Representative.
3.2 PARTS
3. INSTALLATION
Monitor
Remote Controller
Battery
AC/DC Adapter(27”)
User Manual Power Cable
HDMI Cable
*Depending on the product model type, there may be variations in appearance.
[ USER MANUAL ]

R01 9
3.3 HOW TO INSTALL
1) KEY BUTTON
OSD KEY FUNCTION
▼(BRIGHTNESS) Decrease the level of brightness
▲(BRIGHTNESS) Increase the level of brightness
Turn the power ON or OFF. There will be a few seconds delay before the display appears.
The power LED(next the power switch) lights with green when the power is turned ON.
The power is turned off by pressing the power switch again and power LED goes red.
[ USER MANUAL ]

R01 10
2) CONNECTION
a. 27”
①DC Power : DC 12V Input(AC/DC Adapter)
②DVI IN
③VGA IN
④HDMI1 IN
⑤HDMI2 IN
⑥HDMI3 IN
⑦DP IN : DP signal Input
⑧USB : Only FW Update Input
⑨DP OUT : DP Signal Output
⑩Audio : Audio Line Output
① ② ③ ④ ⑤ ⑥ ⑦ ⑧
* All input sources do not support the HDCP
⑨ ⑩
[ USER MANUAL ]

R01 11
2) CONNECTION
b. 43”
①VGA IN
②DVI IN
③HDMI1 IN
④HDMI2 IN
⑤HDMI3 IN
⑥DP IN : DP signal Input
⑦USB : Only FW Update Input
⑧DP OUT : DP Signal Output
⑨Audio : Audio Line Output
⑩AC Power : AC Power Input
① ② ③ ④ ⑤ ⑥ ⑦ ⑧
* All input sources do not support the HDCP
⑨ ⑩
[ USER MANUAL ]

R01 12
2) CONNECTION
c. 55”
①DVI IN
②VGA IN
③HDMI1 IN
④HDMI2 IN
⑤HDMI3 IN
⑥DP IN : DP signal Input
⑦USB : Only FW Update Input
⑧DP OUT : DP Signal Output
⑨Audio : Audio Line Output
⑩AC Power : AC Power Input
① ② ③ ④ ⑤ ⑥ ⑦ ⑧
* All input sources do not support the HDCP
⑨ ⑩
[ USER MANUAL ]

R01 13
3.4 REMOTE CONTROLLER
POWER Power On or Off
MUTE Turn on or off the speaker sound
VIDEO1/CVBS1 Not functional
VIDEO2/CVBS2 Not functional
S-VIDEO Not functional
VGA Select VGA signal
AUTO Auto adjustment in VGA
COLOR TEMP Select color temperature of screen
DVI Select DVI signal
HDMI Select HDMI signal
(HDMI1→ HDMI2 → HDMI3)
DP Select DP signal
HDMI2/CAMERA Not functional
SDI Not functional
S.SET Select Audio Source (HDMI / DP)
SCAN MODE Select Aspect Ratio of screen
PIP Activate PIP mode
VOL-/VOL+ Adjust volume
MENU/EXIT Activate or exit OSD menu
KEYLOCK Lock or release OSD control
P.INPUT Select an input source of PIP
P.LOC Select a location of PIP
P.SIZE Select a screen size of PIP
P.SWAP Swap between Main / Sub screen
STILL Not functional
ROTATE Rotate OSD menu
[ USER MANUAL ]

R01 14
4. OSD MENU
4.1 Main OSD Menu
Press a menu button “MENU/EXIT” on a KEYPAD or a remote controller to display this menu on the screen.
4.2 Input OSD Menu
Press a down direction button “▼” on a KEYPAD or a remote controller to display this menu on the screen.
④
①Information of Windows
②Title of Main Menu
③Icon of Main Menu
④Sub Menu
⑤Version of FW
⑤
①
LT-Win
LB-Win
RT-Win
RB-Win
3840x2160p60Hz
1920x1080p60Hz
3840x2160p60Hz
3840x2160p60Hz
Brightness
Contrast
Gamma
Dynamic Range
Main Sharpness
Sub Sharpness
3D De-interlace
IMAGE
②
③
Ver : R4N.M.O.3.L.0.3
HDMI1
HDMI2
HDMI1
DP
[ USER MANUAL ]

R01 15
4.3 Image
ITEM FUNCTION Default
Value
Available
Mode
Brightness Adjust a bright value between 0 ~ 100 55
All
Contrast Adjust a contrast value between 0 ~ 100 50
Gamma Select a 2.2 gamma Off or ON Off
Dynamic Range Select a dynamic range mode Off, DCR (Dynamic Contrast
Ratio), or DBC(Dynamic Brightness Control) Off
Main Sharpness Select a sharpness mode Off, Weak, Median, Strong,
Strongest on the main channel Off
Sub Sharpness Select a sharpness mode Off, Weak, Median, Strong,
Strongest on the 2nd sub channel Off PIP mode
3D De-interlace Select the de-interlace function On or Off at an interlace
signal entered. On Interlace
Signal
HDMI1 3840x2160p60Hz
Brightness
Contrast
Gamma
Dynamic Range
Main Sharpness
Sub Sharpness
3D De-interlace
IMAGE
Ver : R4N.M.O.3.L.0.3
[ USER MANUAL ]

R01 16
4.4 Color
ITEM FUNCTION Default
Value
Available
Mode
Color
Temperature
Select the color Temperature
Warm/Normal/Cool/User Normal All
Red Adjust red gain value between 0 ~ 255 255
UserGreen Adjust green gain value between 0 ~ 255 255
Blue Adjust blue gain value between 0 ~ 255 255
HDMI1 3840x2160p60Hz
Color Temperature
Red
Green
Blue
COLOR
Ver : R4N.M.O.3.L.0.3
[ USER MANUAL ]

R01 17
4.5 Multi-Window
ITEM FUNCTION Default
Value
Available
Mode
PIP Type Select a PIP mode Off, PIP, PBP, 3 Window or 4 Window Off All
Select Input2 Select an input port of the Sub 1st Channel.
(HDMI1 / HDMI2 / HDMI3) HDMI2 PIP mode,
PBP mode
Select Input3 Select an input port of the Sub 2nd Channel.
(HDMI1 / HDMI2 / HDMI3) HDMI1 3 Window mode,
4 Window mode
Select Input4 Select an input port of the Sun 3rd Channel.
(HDMI1 / HDMI2 / HDMI3) DP 4 Window mode
PIP1 Size Select a window’s size of the Sub 1st Channel
(Large/Median/Small) Large PIP mode
PIP1 Pos Select a window’s position of the Sub 1st Ch.
(Left Top/Right Top/Right Bottom/Left Bottom) Left Top PIP mode
PBP1 Size Select a window’s size of the Sub 1st Channel
(100%/75%/50%) 100% PBP mode
HDMI1 3840x2160p60Hz
PIP Type
Select Input2
Select Input3
Select Input4
PIP1 Size
PIP1 Pox
PBP1 Size
MULTI-WINDOW
Ver : R4N.M.O.3.L.0.3
HDMI1 and HDMI3 can not be selected at the same time (Error on selection)
[ USER MANUAL ]

R01 18
4.6 OSD
ITEM FUNCTION Default
Value
Available
Mode
Horizontal Adjust a horizontal position of the main menu between
0 ~ 100 95
All
Vertical Adjust a vertical position of the main menu between 0 ~ 100 5
Transparency Adjust a transparency of the main menu between 0 ~ 10 0
OSD Time Out Set a displayed time of the main menu between 0 ~ 60 60
OSD Rotation Adjust Rotation of the main menu off
(off / Degree 90 / Degree 180 / Degree 270) off
HDMI1 3840x2160p60Hz
Horizontal
Vertical
Transparency
OSD Time Out
OSD Rotation
OSD
Ver : R4N.M.O.3.L.0.3
[ USER MANUAL ]

R01 19
4.7 SYSTEM
HDMI1 3840x2160p60Hz
Language
Aspect Ratio
Over Scan
Over Driver
Audio Mute
Audio Source
Pixel Shift
DP Speed
FW Update
Reset
SYSTEM
Ver : R4N.M.O.3.L.0.3
ITEM FUNCTION Default
Value
Available
Mode
Language Select a language type of OSD Menu. But now, English only English
All
Aspect Ratio Select an aspect ratio mode of the main window
(Full Screen / Smart Fit / 4:3 / Smart 4:3 / 1:1 / Smart View)
Full
Screen
Over Scan Select OFF or ON to zoom (10%) the screen. Off PIP Off
Over Driver Select OFF or ON to improve the screen speed. Off
All
Audio Mute Select OFF or ON to mute the speaker or the line out. Off
Audio Source TBD HDMI1
Pixel Shift Select Pixel Shift Off or On Off
DP Speed Select speed for compatibility with DP.(2.7G / 5.4G) 5.4G DP Input
FW Update To update a FW All
Reset Select No or Yes to change the default value of OSD Menu. No
[ USER MANUAL ]

R01 20
5. SPECIFICATION
5.1 General Specifications
General Features R4N27DHDN R4N43DHDN R4N55DHDN
Display
Screen Size (inch) 27 42.51 54.64
Resolution 3840 x 2160 3840 x 2160 3840 x 2160
Pixel Pitch (mm) 0.1554 x 0.1554 0.2451 x 0.2451 0.315*0.315 mm
Brightness 350 cd/m² 400 cd/m² 500 cd/m²
Contrast Ratio 1300:1 1000:1 1100:1
Aspect Ratio 16:9 16:9 16:9
Viewing Angle (H/V) 178/178 degrees 178/178 degrees 178/178 degrees
Display Color 1.06 Billion 1.06 Billion 1.07 Billion
Response Time 14ms 8ms 8ms
Backlighting Direct LED Direct LED Direct LED
Interface
VGA In 1 1 1
DVI In 1 1 1
HDMI(2.0) In 3 3 3
Display Port(1.2) In/Out 1/1 1/1 1/1
Audio Out 1 1 1
Audio Built in Speakers Y Y Y
Transmitter Remote Control Y Y Y
Features
Noise Reduction Y Y Y
Aspect Ratio Change Y Y Y
Deinteracing Y Y Y
Auto Pixel Shift Y Y Y
PIP/PBP/Quad View Y Y Y
Power Power Supply DC 12V AC/DC Adapter 100-240V, 50/60Hz 100-240V, 50/60Hz
Power Consumption < 45W < 85W < 125W
Environment Operation Temperature 0°C to 40°C 0°C to 40°C 0°C to 40°C
Conditions Storage Temperature -20°C to 60°C -20°C to 60°C -20°C to 60°C
Physical
VESA Mount Size 100 x 100 mm 300 x 300 mm 400 x 300 mm
Frame Metal Metal Metal
Dimensions
(with Stand)
658.2 x 430.4 x 56.2mm
(25.91x 16.94 x 2.21”)
967.2 x 613.3 x 240mm
(38.08 x 24.15 x 9.45”)
1244 x 772 x 240mmm
(48.98 x 30.39 x 9.45”)
Weight 9kg(19.84 lbs) 20kg(44.09 lbs) 30kg(66.14 lbs)
*Specifications and design are subject to change without notice.
[ USER MANUAL ]
Table of contents
Other ORION Images Monitor manuals

ORION Images
ORION Images 21REDPH User manual

ORION Images
ORION Images 20PVMV User manual

ORION Images
ORION Images 17RTCLD User manual

ORION Images
ORION Images 42HSDI User manual

ORION Images
ORION Images 32PVMV User manual

ORION Images
ORION Images 7" TFT-LCD MONITOR User manual

ORION Images
ORION Images 18.5" User manual

ORION Images
ORION Images KHIP Series User manual

ORION Images
ORION Images TM7 User guide

ORION Images
ORION Images 23HSDI3G User manual