ORVIBO OLOCK User manual

ORVIBO OLOCK
User Manual
Wi-Fi Smart Lock

Packing List
01
Exterior Assembly Panel
DeadboltStrike Plate
Interior Assembly Panel Drill Template
Strike Box
Key x2pcsAA Alkaline Battery
x4pcs
M4x35 Screw
x2pcs
M4x30 Screw
x2pcs
M4x25 Screw
x1pc
M4x20 Screw
x5pcs
M4x8 Screw
x2pcs
User Manual
Interior Assembly
Mounting Plate
ORVIBO OLOCK
User Manual
Wi-Fi Smart Lock

02
Exterior Assembly Panel View
Function
① Lock: Press button for 2 seconds to lock.
② Unlock: Enter a valid password and press button to unlock.
③ Setting Mode: Press the button and then button to
enter setting mode.
Touch Screen
Unlock Button
Cylinder
Lock Button
Type-C USB Port

03
Interior Assembly Panel View
Function
① Reset: Press the RESET button for more than 3 seconds
to reset.
② Indoor Lock: PresstheIndoorLockbuttonfor2secondsto
lockfrominside.
Battery Cover
Screw
RESET Button
Battery Cover
Thumb Knob
Indoor Lock
Button
Screw Port

04
Installation
① Check the status of the door and make sure the doorframe
is aligned with the door.
② There are no obstructinos stuck in the doorframe.
③ Leave enough space for the deadbolt to extend into the
doorframe when the door is locked.
1. Make sure that the following criteria are met so that
the Smart Lock can be installed properly：
2. Draw a horizontal line 39 ⅖
" [1000 mm] from the
ground as the center line of the door front and then fold
the drilling template so that its center line is aligned with
the horizontal center line. Draw the lock hole center and
the deadbolt hole center to confirm the position of the
holes.
Door Thickness: ⅜1 [35mm]
"⅛-2 [55mm]
"
Side Center Line
Diameter: 2 " [50mm]
Center Line
Diameter: 1 " [25mm]
Deadbolt Hole Center
Lock Hole Center
⅜2
[60mm] Backset
[1000mm]
from the ground
"
⅖
39
"
¾
2
[70mm] Backset
"
Log in to ORVIBO Home APP to check the installation video.

05
3. Drilling holes
① The lock hole diameter is 2" [50mm].
② The deadbolt hole diameter is 1" [25mm] , depth is 4" [100mm].
The deadbolt slot size is 2.3"[58mm] x 1.04"[26.5mm] x 0.16"
[4mm] (d).
③ The size of the installation slot for the strike plate is
1.03"[26mm] x2.25"[57mm] x0.1" [2.5mm] (d).
The size of the installation slot for the strike box is
0.87" [22mm] x 1.18"[30mm] x 1.18" [30mm] (d).
1.03"[26mm] x 2.25"[57mm] x 0.1"[2.5mm] (d)
0.87"[22mm] x 1.18"[30mm] x 1.18"[30mm] (d)
φ 2"[50 mm]
φ 1"[25mm] 2.3"[58mm]x1.04"
[26.5mm]x0.16"
[4mm](d)
Depth: 4"[100mm]

06
4. Adjust Direction
① Confirm the door opening direction according to the
picture below.
② Left Bolt: Set the motor steering and indoor knob to L
Right Bolt: Set the motor steering and indoor knob to R
a. Turn the indoor knob to make the arrow point to L or R.
(Refer A)
b. Turn the motor steering to L or R on the Printed Circuit Board.
(Refer B)
Left Bolt Right Bolt
Notice: View from outside of the door
A: Indoor knob B: The motor steering
A
B

07
① Measure whether your door's backset is 2.36 " [60mm] or
2.76
" [70mm].
② Adjust the length of the deadbolt. Rotate it 180° to adjustable
to 2.36
" [60mm] or 2.76 " [70mm] (fit for distance of 2.36 "
[60mm] or 2.76 " [70mm] between lock hole and door side).
③ Insert the deadbolt into the door frame and make sure the
word “TOP” faces up as indicated on the deadbolt. Screw
into the door frame with a screwdriver (not provided).
③ Turn the thumb knob to Left/Right direction
Right Open Left Open
Step 1: Install the deadbolt.
5. Installing The Smart Lock
Note: the thumb knob to Left/Right direction
180°
23
/
8[60mm] 23
/
4[70mm]

08
① Align the strike plate with the deadbolt hole center.
② Insert the strike box and the strike plate into the Installation
slot.
③ Secure the strike plate with 2 pcs M4x20 screws, making
sure the plate is placed in the correct direction.
Step 2: Install the strike plate.
If you have an existing plate installed, skip this step.
Strike Plate
Strike Box
Use 2 pcs M4 x20 screws
TOP
2 pcs M4x20
Screws

09
① Route the cable through the interior assembly mounting plate.
Secure the mounting plate to the interior doorframe with 2
pcs M4x30 screws. (or use 2pcs M4×35 Screws as needed)
Step 3: Install the Exterior Assembly Panel.
Install the exterior assembly panel outside of the door:
① Pass the connecting wire through under the deadbolt.
② Turn the key drive lever to align with horizontal line.
③ Insert the key drive lever into the drive hole of the deadbolt.
④ Install the Exterior Assembly Panel.
Step 4: Install the Interior Assembly Panel

10
② Remove the battery cover with a screwdriver (not provided).
③ Connect the interior and exterior assembly panel cables.
Plug the wire connector into the socket on the interior
assembly panel.
Use 2 pcs M4x30 screws
(or use 2pcs M4×35 Screws
as needed)
Interior Assembly
Mounting Plate

④ Secure the the interior assembly panel to the mounting plate
with 2 pcs M4x8 and 1 pc M4x25 screws.
11
Use 2 pcs
M4x8 screws
Use 1 pc
M4x25 screw

⑤ Turn the thumb knob to check whether the deadbolt is
retracted. If the deadbolt does not work smoothly, adjust
the screws and install the mounting plate again.
① Insert 4 pcs AA batteries into the battery compartment
matching the polarity (+/-) indicated.
Note:
a. Newandoldbatteriescannotbemixed,anddifferentbrands
ofbatteriescannotbemixed.
b. Please replace the dead batteries in time, otherwise there is
a risk of unlocking failure or battery leakage resulting in lock
damage.
② Install the battery cover with a screwdriver (not provided).
Step 5: Install Batteries and Battery Cover.
Now you have completed the installation of the OLOCK!
Please follow the instructions to set up and use the smart lock.
12

Testing Operation
① Lock Testing
Press the button for 1 second to lock.
② Unlock Testing
Press the default password “123456”+ button to unlock.
Note: The lock will not lock automatically before the auto lock
setting on.
13

Setting Up The Lock
The smart lock supports Touch Button Setting and APP setting.
① Touch button setting:
Enter the lock setting
Press the button and then the button to enter setting mode.
Follow the prompts to set/verify the administrator password to
enter the lock setting.
② Add new user
Press 1 button to add a new user. Follow the prompts to set a
6-digit password.
a. The regular password used for normal unlocking.
b. The emergency password used for emergency unlocking,
and the APP will receive the alarm notification after unlocking.
③ Add the user password
Press 2 button to add a user password, regular password or
emergency password.
④ Delete the user
Press 3 button to delete a user, enter the user password, and
then press button to delete.
⑤Lock setting
Press 3 button for lock setting, you can set auto-lock and unlock
prompt tone.
14

15
App Setting:
①Download and install "ORVIBO Home"App
Scan the QR code below to download and install the
"ORVIBO Home" App. Register an account and log in, then
create a family or join an existing family.
② Add the smart lock
Open the " ORVIBO Home" app and click on "Scan QR Code"
to add device. Scan the QR code above or click the "+" in the
upper right corner and select "Door Lock" , then select "ORVIBO
OLOCK". Complete the wifi configuration according to the APP
instructions.
ORVIBO Home
Auto lock setting: off and 30s/1min/5min
Unlock prompt tone setting: on/off
Note: Please pay attention to the Auto-Lock time. If you set 30s,
then the door will automatically lock after 30s.

16
③ APP Setting
a. Member management: Add or remove user passwords for
the lock.
b. Temporary password: Authorize a temporary password to
the visitor.
c. Automation: Customized automation to control other devices
of the same brand through the status of the OLOCK.
d. Settings: Auto Lock, Prompt Tone, Unlock Record Notification,
Firmware Update and Other Settings.

17
App Other Function:
a. Lock status: Unlocked or locked status is displayed in the app.
b. Door lock records:Regularunlockingrecords, emergency
passwordunlockingalarmrecords,illegaltrytounlockalarm
records.

18
Basic Operations
①Unlock the Door
You can unlock the door using a valid password, backup key or
the thumb knob.
Option 1: Use the access password
a. Press any button or tap the touchscreen to wake up the
keypad, then the keypad will light up.
b. Enter a 6-digit access password and press the button
to unlock.
c. If the password is wrong, please enter a new access
password again.
Note: If you fail to unlock the door for 5 consecutive times using
the access password, the smart lock will be locked for 2 minutes.
You can use the backup key to unlock the door or wait for two
minutes.
c. Notificationofnotarrivinghome:
Select " Unlock Record Notification " to turn on not arriving
home reminder. If there is no unlocking record in the set time
period, APP will send a notification to warn you.

19
Option 2: Use the backup key
Insert and turn the backup key to unlock the door.
Option 3: Use the thumb knob of the interior assembly panel
Turn the thumb knob of the interior assembly panel to unlock
the door.
②Lock the Door
Option 1: Use automatic lock
a. Set the "Auto Lock" option to ON in the APP and set the
duration for which the door is locked.
b. The Smart Lock will detect whether the door is locked.
If not, the door will be locked automatically after the time
duration you set.
Option 2: Use button
When the door is closed, press the button to lock .
Option 3: Use the thumb knob of the interior assembly panel
Turn the thumb knob of the interior assembly panel to lock the
door.
③ Locked Inside
When the door is closed and locked, press the " Indoor Lock Button"
for 2 seconds to lock from the inside.