OSEPP TRIANGULAR TANK MECHANICAL KIT Quick start guide

OSEPP Mechanical & Functional
Kits Tutorials
create interactive robotics projects with our Robotics Functional Kit!
OSEPP ROBOTICS KITS GUIDE
1

TRIANGULAR TANK MECHANICAL KIT!
OSEPP ROBOTICS KITS GUIDE
41

PARTS INCLUDED
Materials QTY!
OSEPP ROBOTICS KITS GUIDE
42
2
4
2
6
4
2
2
ultrasonic Mount
1
Double Beam -9
RIM -90T
DC Motor -25 Bracket
Double Beam -8
Shaft Connector 4mm
Double Beam -6
Base Plate

OSEPP ROBOTICS KITS GUIDE
43
4
8
50
50
Wrench
1
2
1
8
8
Threaded Shaft 4x39mm
Track Axle
Battery Holder 6AA
Tracks
DC Motor -25 w/pcb
StandoM4*15
Beam Connector
Flange Bearing 4x8x3mm

OSEPP ROBOTICS KITS GUIDE
44
10
plastic clip
10
Motor Cable
2
4
10
4
5
20
20
20
Screw M3x8 - Flat Head
10
10
20
Plastic Ring 4x7x2mm
Terminal Block
Screw M4x22
Screw M4x8
Nut M4
Headless Screw M3x10
Screw M4x12
Screw M3x6 - HEX
Headless Screw M4x8
Screw M4x14

OSEPP ROBOTICS KITS GUIDE
45
Analog Servo
1
Servo Accessory Set (servo horn, bracket, screws)
1
Hex Allen Key 3.0mm
1
Hex Allen Key 2.5mm
1
Hex Allen Key 2.0
1
Hex Allen Key 1.5
1
Wrench
1
2
Plate B 3X6
Phillips Screwdriver
1

ASSEMBLY INSTRUCTIONS
Attaching Motors
Parts List:
OSEPP ROBOTICS KITS GUIDE
46
1
DC Motor
1
DC Motor -25 Bracket
Screw M3x8 - Flat Head
2
Phillips Screwdriver
1

Attach the shaft of the motor inside the center hole of the
mounting bracket. Use a Phillips head screwdriver to
attach the bracket to the DC motor.
OSEPP ROBOTICS KITS GUIDE
47

Attaching DC motor to Double
Beam
Parts List:
OSEPP ROBOTICS KITS GUIDE
48
1
Double Beam -9
2
Screw M4x12
Hex Allen Key 3.0mm
1

Attach the mounted DC motor to the Double Beam
09 with the M4 screws.
OSEPP ROBOTICS KITS GUIDE
49

Installing the Rim and Shaft
Connector
Parts List:
OSEPP ROBOTICS KITS GUIDE
50
2
RIM -90T
2
Threaded Shaft 4x39mm
2
Flange Bearing 4x8x3mm
2
Screw M3x6 - HEX
Hex Allen Key 2.5mm
1
2
Shaft Connector 4mm
2
Headless Screw M3x10
2
Plastic Ring 4x7x2mm

Insert the threaded shaft through the RIM-90T
center. Add a ange to each end. Screw the M3 into
the threaded shaft.
OSEPP ROBOTICS KITS GUIDE
51

Insert the headless screw into the center of the shaft
connector.
OSEPP ROBOTICS KITS GUIDE
52

Place the plastic ring rst through the DC motor shaft.
Attach the shaft connector to the DC motor shaft. Tighten
the headless screw.
OSEPP ROBOTICS KITS GUIDE
53

The Rim
Parts List:
OSEPP ROBOTICS KITS GUIDE
54
2
RIM -90T
2
Screw M4x14
Hex Allen Key 3.0mm
1
1
Nut M4
Wrench
1
1
Double Beam -6
4
Beam Connector
4
Headless Screw M4x8
Hex Allen Key 2.0
1

Attach the Rim to the motor bracket with the M4 screws.
OSEPP ROBOTICS KITS GUIDE
55

attach the other rim to the double beam. Tighten the rim
to the double beam with the M4 nut.
At this point, you will want to repeat these steps to
congure the other DC motor. !
OSEPP ROBOTICS KITS GUIDE
56

The Frame
Parts List:
OSEPP ROBOTICS KITS GUIDE
57
Assembled DC Motors (previous steps)
2
4
HEX Screw M4x12
Assembled Double Beam (previous steps)
1
Hex Allen Key 3.0mm
1

Slide in the beam connectors to each corner of the double
beam. Attach the headless screws into the corner holes of
the double beam. !
OSEPP ROBOTICS KITS GUIDE
58

Connecting the Parts Together
Parts List:
OSEPP ROBOTICS KITS GUIDE
59