DREAMS Ullswater User manual

Ullswater / Tollymore BedDouble, King & Super King
Assembly Instructions
OPTION 1:
SOLID SLATS
OPTION 2:
SPRUNG SLATS
OPTION 3:
SLEEPMOTION
1/2 hour approx
assembly time

Ullswater/Tollymore Bed

k you have all parts listed below.
Ullswater /Tollymore B e d

Ullswater/Tollymore

ASSEMBLY
STEP1
-Use bolt(mounted onthe
headboardandfootboard)to
fix the Side Rail (3 onto
Headboard 1and Footboard
(2) by usingAllen Key (C).
)(
)
4
1
2
3
3
Ullswater / Tollymore Bed - Assembly Guide - Page 5

STEP 2
NOTE:You have bought your bed,
choosing one of two slat options;
either solid or sprung. Although
both assembly options are
explained here only one will apply
to you. Please follow the correct
procedure for the slat system which
you have chosen.
Both slats on "step 2" and "step 3"
can be assembled to the bedstead.
Y
ou can make a choice between the
two slats.
OPTION"A": DREAMS FIXED
WOOD SLATS
(1) Carefully locate the slats
onto the unit ,as step 2:
Use bolt (A), washer (D) and
JCN nut (B ) to fix the unit
using Allen Key (C)
provided).
Not included
(2) Fit the adjustable Support
Leg (4) to the center
slat. Secure with Screw (E)
using Screwdriver (not
ASSEMBLY
SOLID SLATS OPTION
Ullswater / Tollymore Bed - Assembly Guide - Page 6
D
A
C
B
E
C
4
4

SPRUNG SLATS
(1) Use the bolt to fix support
leg onto the slat frame.
Please note that these bolts
are to be found inside the slat
frame box.
(2) Carefully locate the slats
onto the unit.
(3) Use bolt (A) and JCN nut
(B) to fix the unit using Allen
Key (C).
OPTION"B": DREAMS STEP3
ASSEMBLY
SPRUNG SLATS OPTION
Ullswater / Tollymore Bed - Assembly Guide - Page 7

ASSEMBLY
SLEEPMOTION
-Place the Headboard (1) on the
top edge to Sleepmotion
with Allen Key (C)
-place the assembled parts 10mm
STEP 1
from the corner of Sleepmotion
as illustrated.
bolt mounted on the headboard
attach the Side Rail (3) using
OPTION"C": DREAMS
SLEEPMOTION OPTION
Ullswater / Tollymore Bed - Assembly Guide - Page 8

ASSEMBLY
-Raise the Head end and foot
end of the Sleepmotion
using the supplied remote
control
STEP 2
SLEEPMOTION OPTION
Ullswater / Tollymore Bed - Assembly Guide - Page 9

ASSEMBLY
Position the Footboard (2) to
assemble with the Side Rail
(3) using the bolt mounted in
the Foot board with Allen
Key(C)
STEP 3
SLEEPMOTION OPTION
Ullswater / Tollymore Bed - Assembly Guide - Page 10