Osprey XENITH 105 User manual

ospreypacks.com
OWNER'S MANUAL
XENITH / XENA SERIES
XENITH 105
XENA 85 XENA 70
XENITH 88 XENITH 75
Welcome to Osprey. We pride ourselves on creating the most functional,
durable and innovative carrying product for your adventures. Please refer to
this owner’s manual for information on product features, use, maintenance,
customer service and warranty.
S18 - UPDATED 11/17

XENITH / XENA SERIES 2
OVERVIEW
SHARED FEATURES
1 Removable top lid converts to DayLidTM daypack
2 Dual side compression straps
3 Dual side zips provide easy access to main compartment
4 Stow-on-the-Go™ trekking pole attachment
5 Dual front zip pockets for organized storage
6 Front hybrid fabric-stretch mesh pocket for stashing gear
7 Dual ice tool loops with bungee tie-offs
8 Wide mouth access to sleeping bag compartment
with removable divider
9 Removable sleeping pad straps
10 External hydration reservoir sleeve
11 Dual access stretch mesh side pockets
12 Zippered hipbelt pockets provide secure small item storage
+ Integrated FlapJacket™ cover for lidless use
FABRIC
MAIN 420D High Tenacity Nylon
ACCENT 210D High Tenacity Nylon
BOTTOM 500D Nylon Packcloth
4
3
1
4
2
5
6
7
8
9
12
11
10

XENITH / XENA SERIES 3
OVERVIEW
XENITH 88
MEN'S
SPECS M L XL
Cubic Inches 5370 5614 5858
Liters 88 92 96
Pounds 5.50 5.61 5.72
Kilograms 2.50 2.55 2.60
Inches 33h x 16w x 13d
Centimeters 85h x 40w x 34d
LOAD RANGE 40-70 lb | 18-32 kg
XENITH 75
MEN'S
SPECS M L XL
Cubic Inches 4577 4821 5065
Liters 75 79 83
Pounds 5.45 5.56 5.67
Kilograms 2.26 2.34 2.53
Inches 34h x 16w x 15d
Centimeters 87h x 41w x 37d
LOAD RANGE 40-70 lb | 18-32 kg
XENITH 105
MEN'S
SPECS M L XL
Cubic Inches 6407 6652 6896
Liters 105 109 113
Pounds 5.67 5.78 5.89
Kilograms 2.57 2.62 2.67
Inches 35h x 16w x 18d
Centimeters 88h x 41w x 46d
LOAD RANGE 50-80 lb | 23-35 kg

XENITH / XENA SERIES 4
OVERVIEW
XENA 70
WOMEN'S
SPECS WXS WS WM
Cubic Inches 3783 4028 4272
Liters 62 66 70
Pounds 5.04 5.15 5.26
Kilograms 2.29 2.34 2.39
Inches 33h x 15w x 16d
Centimeters 84h x 38w x 40d
LOAD RANGE 40-70 lb | 18-32 kg
XENA 85
WOMEN'S
SPECS WXS WS WM
Cubic Inches 4699 4943 5187
Liters 77 81 85
Pounds 5.10 5.21 5.32
Kilograms 2.32 2.37 2.42
Inches 33h x 15w x 17d
Centimeters 85h x 39w x 42d
LOAD RANGE 40-70 lb | 18-32 kg

XENITH / XENA SERIES 5
CARRY
1
2
3
3
4
STERNUM STRAP
HARNESS
HIPBELT
FRAME
BACKPANEL
1 SUSPENSION
+ 4mm LightWire™ peripheral frame (105)
+ 3.5mm LightWire™ peripheral frame
(88, 75, 85, 70)
2 BACKPANEL
+ Airscape™ Backpanel
+ Mesh-covered ridged foam allows maximum
ventilation and keeps the load close to the body
3 BIOFORM4 HARNESS
+ NeoSpacer™ fabric provides comfortable fit
4 BIOFORM4CM™ HIPBELT
+ Balances firmness and cushioning for
optimal carry
+ Custom heat molding for a precise,
personalized fit*
*Available at select retail stores
BIOFORM4HARNESS MEN'S
SIZE S M L XL
BIOFORM4CMTM HIPBELT MEN'S
RETAIL $35
SIZE S M L XL
INCHES <31 30-34 33-37 >36
CENTIMETERS <79 76-86 84-94 >91
BIOFORM4CM™
The BioForm4hipbelt carries our reputation for
outstanding fit and comfort with heavier loads, offering
custom heat molding for a precise, personalized fit.
BIOFORM4HARNESS WOMEN'S
SIZE XS S M L
BIOFORM4 CMTM HIPBELT WOMEN'S
RETAIL $35
SIZE XS S M L
INCHES <28 27-31 30-34 >33
CENTIMETERS <71 68-79 76-86 >94

XENITH / XENA SERIES 6
SIZING / FIT
HARNESS SIZING
A Completely loosen the pack's hipbelt straps, harness straps and load lifters.
B Load the pack with 10-20lbs/4-9kg of gear.
C Put on the pack ensuring the hipbelt is centered and resting over the user's
hipbones. The hipbelt padding should sit half above and half below the hipbone.
Buckle the hipbelt and tighten the hipbelt straps.
D Tighten the shoulder harness straps by pulling them down and back. Adjust and
buckle the sternum strap 2"/5cm below the collar bone. Tighten the load lifts to
transfer the weight off of the shoulders.
E Find the harness yoke or where the harness straps come together near the user's
neck. The yoke should be 2"/5cm below the C7 vertebra. The C7 vertebra can be
located by tilting the head down and finding the bone that protrudes at the base
of the neck.
F Make note of how far the yoke is from the C7 vertebra. Based on this
measurement, the torso can be adjusted to the desired 2"/5cm.
XENITH - MEN'S SIZING
M 18-21"/ 46-53 cm
L 20-23"/ 51-58.5 cm
XL 22-25"/ 56-68.5 cm
XENA - WOMEN'S SIZING
XS 14-17 "/ 35.5-43 cm
S 17-1 9"/ 43-48 cm
M 19-21"/ 46-53 cm
HARNESS FIT
The harness straps should wrap fully around your shoulders with no gaps
between the pack and back. The padded part of the harness straps should
end 1"/2.5cm- 2"/5cm below the armpits and the sternum strap adjusted to
approximately 2"/5cm below the collarbone.
ILIAC CRESTC7 VERTEBRA
WOMEN'S SPECIFIC FIT
+ The unique suspended mesh located on the shoulders, backpanel, lumbar and
hipbelt contour to a wide variety of body shapes and sizes to create a custom fit
for your body.
+ The pack shape is narrower and deeper, allowing greater freedom of movement
and increases stabilization by lowering the position of the load to a woman's
center of gravity.
+ The shoulder harness is designed with different curves to create an anatomical
fit for a woman's neck, shoulders and chest.
+ Women's hips are conically shaped with a larger difference between the waist
and hip measurements. The hipbelts are shaped and angled to accommodate
this difference, which allows a more comfortable load transfer and support.

XENITH / XENA SERIES 7
SIZING / FIT
INTERCHANGEABLE HIPBELT & HARNESS
Features interchangeable hipbelts to accommodate differences in body
proportions and ensure a perfect fit.
To remove the hipbelt:
1 Unclip the buckle at the front of the zippered hipbelt pocket and beneath
the hipbelt pocket. Repeat on the opposite side.
2 Slide your hand between the hipbelt and pack to break the hook
and loop closure and remove the hipbelt.
3 Reverse instructions to reinstall new hipbelt.
To remove the harness:
1 Unthread load lifter webbing on both sides of harness
2 Unthread lower harness strap webbing on both sides of harness
3 Slide hand between backpanel and harness to release hook
and loop attachment
4 Reverse steps to install new harness
To adjust the harness:
A Slide hand between backpanel and harness to release hook and loop
attachment and slide harness into position using arrows to guide
1
2

XENITH / XENA SERIES 8
FEATURE DETAILS
DUAL FRONT ZIP POCKETS FOR
ORGANIZED STORAGE
105L / 88L / 75L / 85L / 70L
Dual front panel zippered pockets
provide additional gear storage
and organization options.
DUAL ZIPPERED HIPBELT POCKETS
105L / 88L / 75L / 85L / 70L
Zippered hipbelt pockets keep food
and small items close at hand.
DUAL SIDE ZIPS PROVIDE EASY ACCESS TO MAIN COMPARTMENT
105L / 88L / 75L / 85L / 70L
Dual side zips provide access to gear stored in the main
compartment without opening the top lid.
DUAL SIDE COMPRESSION STRAPS
105L / 88L / 75L / 85L / 70L
Dual upper and lower compression
straps stabilize loads and maintain
a slim profile.
STOW-ON-THE-GO™ TREKKING POLE ATTACHMENT
105L / 88L / 75L / 85L / 70L
Osprey's Stow-on the-Go™ trekking pole attachment is designed to quickly attach
and carry trekking poles while wearing a pack.
A Locate the elasticized loop on the lower left side of pack. While pulling the loop
out from the pack, insert the basket end of the trekking poles into the loop.
B On the left harness strap locate the trekking pole icon. Pull up on the cord to
open, place pole handles in the loop and tighten with the cord lock to secure.
C Reverse these steps to remove the trekking poles.

XENITH / XENA SERIES 9
FEATURE DETAILS
DUAL ICE TOOL LOOPS WITH
BUNGEE TIE-OFFS
105L / 88L / 75L / 85L / 70L
The ice tool loops and bungee tie-offs
provide secure tool attachment.
A Slide the tool shaft through the top
of the ice tool loop and flip the shaft
up toward the top of the pack.
B Loosen the bungee cord lock and
route the tool handle through the
bungee. Tighten the cord lock
nesting it into the Y-clip to secure
the tool into place.
C Reverse to remove.
SLEEPING PAD STRAPS
85L / 70L / 60L / 75L / 65L / 55L
Removable sleeping pad straps for external attachment.
A Unclip the two sleeping pad strap buckles.
B Remove the webbing from the triglide
at the base of the pack.
C Reverse to reattach.
FLAPJACKET COVER
85L / 70L / 60L / 75L / 65L / 55L
When using pack without top
lid, unfold FlapJacket™ buckles
and attach to the front vertical
compression straps.
FRONT HYBRID FABRIC-
STRETCH MESH POCKET
FOR STASHING GEAR
105L / 88L / 75L / 85L / 70L
Front hybrid nylon/stretch
mesh pocket stores gear you
need quick access to, or holds
wet gear to dry.
WIDE MOUTH ACCESS TO SLEEPING BAG COMPARTMENT
WITH REMOVABLE DIVIDER
105L / 88L / 75L / 85L / 70L
Lower zippered compartment for dedicated sleeping bag storage
with detachable divider for unimpeded access to pack interior.
A Unthread the divider webbing from the triglides.
B Reverse to reattach.
EXTERNAL RESERVOIR SLEEVE
105L / 88L / 75L / 85L / 70L
External reservoir sleeve located behind
shoulder harness allows for easy loading/
unloading. Place reservoir inside sleeve
to help ensure proper pack weight
distribution. Clip reservoir to buckled
loop to keep upright.

XENITH / XENA SERIES 10
REMOVABLE TOP LID AND DAYLID™ DAYPACK
105L / 88L / 75L / 85L / 70L
To remove top lid, unclip the two buckles on the front of the pack and the buckles on
either side of the load lifter straps and unthread webbing from keeper loops.
To convert the top lid into the DayLid™ unzip the U-shape zippered
compartment and pull out harness straps. Attach the buckle on the end of
the DayLid™ harness straps to buckles adjacent to standard top lid buckles.
Reverse the process to return to normal top lid function and reattach.
FEATURE DETAILS

For more information on this product and others, pack care, how to pack your pack,
our lifetime guarantee, or to contact Osprey Customer Service, visit ospreypacks.com.
ospreypacks.com
OWNER'S MANUAL