Oster 1791-033 User manual

User Manual
Notice d’emploi
OsterTM Nutrition Center / Robot culinaire OsterMC
MODEL/MODÈLE 1791-033 P.N. 160070/9100260000107
Nutrition Center
Robot culinaire pour bébé
IB Oster Baby 1791-033_12EFM1.indd 1 5/18/12 10:52 AM

2 3
This appliance must be grounded while in use to protect the operator from
electrical shock.The appliance is equipped with a 3-conductor cord and a 3-prong
grounding-type plug to fit the proper grounding-type receptacle.The appliance has
a plug that looks like sketch (A). If you do not have a grounded outlet as shown,
call a qualified electrician. Do not attempt to modify the plug in any way.
IMPORTANT SAFEGUARDS
Extension Cord Use
A short power-supply cord is provided
to reduce the risk resulting from
becoming entangled in or tripping over
a longer cord. An extension cord may
be used if care is exercised in its use.
The extension cord should be arranged
so that it will not drape over the coun-
tertop or tabletop where it can be pulled
by children or tripped over unintention-
ally. If the extension cord is used, use
only 3-wire extension cords, which
have 3-prong grounding-type plugs and
3-pole cord connectors that accept the
plug from the appliance. Use only ex-
tension cords having an electrical rating not less than the rating of the appliance.
Do not use damaged extension cords. Examine extension cord before using and
replace if damaged. Do not abuse extension cord and do not yank on any cord to
disconnect. Keep cord away from heat and sharp edges. 2-prong adapter may be
used –sketches B and C– (included).
What Your OsterTM Baby Nutricenter System Includes
Model # Parts Included Functions
• OsterTM Baby Nutricenter base • Sterilizing
1791 • Steam / blend container • Warming
Baby Food • Steam / blend lid • Steaming baby food
Preparation • Steam / blend screen • Processing baby food
Center • Stainless steel blade • Steaming with
• Steam / blend base tri-level steam trays
• Water reservoir
• Water reservoir lid
• Motor drive
• Nutrient collector/measuring cup
• Sterilizer lid
• Accessory tray
• Bottle tray
• Sterilizer base
• Warmer holder
• Warmer base
• Tri-level steam trays
• Tri-level steam trays lid
• Food containers (3)
• Food container lids
• OsterTM Baby Nutricenter base • Steaming baby food
1792 • Steam / blend container • Processing baby food
Baby Food • Steam / blend lid • Steaming with
Preparation • Steam / blend screen tri-level steam trays
Module • Stainless steel blade
• Steam / blend base
• Water reservoir
• Water reservoir lid
• Motor drive
• Nutrient collector/measuring cup
• Sterilizer lid • Sterilizing
(models 1791 or 1792
REQUIRED for functionality)
1795 • Accessory tray
Sterilization • Bottle tray
Module • Sterilizer base
A B
C
When using electrical appliances, basic safety precautions should always be
taken, including the following:
1. READ ALL INSTRUCTIONS.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electrical shock, do not immerse cord, plugs, or appliance
base in water or other liquid.
4. Close supervision is necessary when the appliance or accessories are used
near children.
5. PRESS ON/OFF BUTTON TO TURN PRODUCT OFF AND
UNPLUG FROM OUTLET WHEN NOT IN USE OR BEFORE
CLEANING OR STORING. ALLOW TO COOL BEFORE PUTTING
ON OR TAKING OFF PARTS, AND BEFORE CLEANING THE
APPLIANCE.
6. Do not operate the appliance with a damaged cord or plug, after a
malfunction, or if it is dropped or damaged in any manner. Return appliance
to the nearest authorized service facility for examination, repair, electrical or
mechanical adjustment.
7. The use of accessory attachments not recommended by the appliance manu
facturer may result in fire, electric shock or injury to persons.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter, or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Extreme caution must be used when moving an appliance containing hot
water or other hot liquids.
12. To disconnect, press on/off button to turn product off and remove plug from
wall outlet.
13. Do not use appliance for other than intended use.
14. Before serving, be sure food is at a safe temperature.
15. Before serving, unplug cord from wall outlet and remove blade from steam/
blend container. Do not leave cord within child’s reach.
16. Avoid contact with moving parts.
1 7. Double-blade cutter is extremely sharp. Use caution when removing to clean.
Handle carefully. Grasp top of double-blade cutter to remove.
18. The appliance is intended for processing small quantities of food, and is
especially recommended for preparing baby food.The appliance is intended
for preparing up to 480ml /16 oz of food at one time.
Bowl must be in place and locked before replacing double-blade cutter.
19. Do not attempt to defeat the interlock mechanisms.
20. Make sure reservoir lid is in place before operating appliance.
21. Keep hands and utensils away from the cutting blade while chopping food to
reduce the risk of severe injury to persons or damage to the food chopper. A
scraper may be used but only when the food chopper is not running.
22. The appliance does not contain any user serviceable parts. Do not dismantle.
23. Place appliance on a flat and stable surface.
24. Do not move the appliance when in use, when plugged or if it contains hot
water.
25. Use plastic bottles approved for boiling or glass thermo resistant bottles/
containers with this appliance.
26. Before connecting the appliance to the main power supply, check that the
voltage indicated on the specification plate (underneath the base) corresponds
to the local main voltage.
27. To prevent electric shock, do not open base.
28. For household use only.
29. Never use the steam function without water in the water reservoir.
SAVE THESE INSTRUCTIONS
IB Oster Baby 1791-033_12EFM1.indd 2-3 5/18/12 10:52 AM

2 3
This appliance must be grounded while in use to protect the operator from
electrical shock.The appliance is equipped with a 3-conductor cord and a 3-prong
grounding-type plug to fit the proper grounding-type receptacle.The appliance has
a plug that looks like sketch (A). If you do not have a grounded outlet as shown,
call a qualified electrician. Do not attempt to modify the plug in any way.
IMPORTANT SAFEGUARDS
Extension Cord Use
A short power-supply cord is provided
to reduce the risk resulting from
becoming entangled in or tripping over
a longer cord. An extension cord may
be used if care is exercised in its use.
The extension cord should be arranged
so that it will not drape over the coun-
tertop or tabletop where it can be pulled
by children or tripped over unintention-
ally. If the extension cord is used, use
only 3-wire extension cords, which
have 3-prong grounding-type plugs and
3-pole cord connectors that accept the
plug from the appliance. Use only ex-
tension cords having an electrical rating not less than the rating of the appliance.
Do not use damaged extension cords. Examine extension cord before using and
replace if damaged. Do not abuse extension cord and do not yank on any cord to
disconnect. Keep cord away from heat and sharp edges. 2-prong adapter may be
used –sketches B and C– (included).
What Your OsterTM Baby Nutricenter System Includes
Model # Parts Included Functions
• OsterTM Baby Nutricenter base • Sterilizing
1791 • Steam / blend container • Warming
Baby Food • Steam / blend lid • Steaming baby food
Preparation • Steam / blend screen • Processing baby food
Center • Stainless steel blade • Steaming with
• Steam / blend base tri-level steam trays
• Water reservoir
• Water reservoir lid
• Motor drive
• Nutrient collector/measuring cup
• Sterilizer lid
• Accessory tray
• Bottle tray
• Sterilizer base
• Warmer holder
• Warmer base
• Tri-level steam trays
• Tri-level steam trays lid
• Food containers (3)
• Food container lids
• OsterTM Baby Nutricenter base • Steaming baby food
1792 • Steam / blend container • Processing baby food
Baby Food • Steam / blend lid • Steaming with
Preparation • Steam / blend screen tri-level steam trays
Module • Stainless steel blade
• Steam / blend base
• Water reservoir
• Water reservoir lid
• Motor drive
• Nutrient collector/measuring cup
• Sterilizer lid • Sterilizing
(models 1791 or 1792
REQUIRED for functionality)
1795 • Accessory tray
Sterilization • Bottle tray
Module • Sterilizer base
A B
C
When using electrical appliances, basic safety precautions should always be
taken, including the following:
1. READ ALL INSTRUCTIONS.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electrical shock, do not immerse cord, plugs, or appliance
base in water or other liquid.
4. Close supervision is necessary when the appliance or accessories are used
near children.
5. PRESS ON/OFF BUTTON TO TURN PRODUCT OFF AND
UNPLUG FROM OUTLET WHEN NOT IN USE OR BEFORE
CLEANING OR STORING. ALLOW TO COOL BEFORE PUTTING
ON OR TAKING OFF PARTS, AND BEFORE CLEANING THE
APPLIANCE.
6. Do not operate the appliance with a damaged cord or plug, after a
malfunction, or if it is dropped or damaged in any manner. Return appliance
to the nearest authorized service facility for examination, repair, electrical or
mechanical adjustment.
7. The use of accessory attachments not recommended by the appliance manu
facturer may result in fire, electric shock or injury to persons.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter, or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Extreme caution must be used when moving an appliance containing hot
water or other hot liquids.
12. To disconnect, press on/off button to turn product off and remove plug from
wall outlet.
13. Do not use appliance for other than intended use.
14. Before serving, be sure food is at a safe temperature.
15. Before serving, unplug cord from wall outlet and remove blade from steam/
blend container. Do not leave cord within child’s reach.
16. Avoid contact with moving parts.
1 7. Double-blade cutter is extremely sharp. Use caution when removing to clean.
Handle carefully. Grasp top of double-blade cutter to remove.
18. The appliance is intended for processing small quantities of food, and is
especially recommended for preparing baby food.The appliance is intended
for preparing up to 480ml /16 oz of food at one time.
Bowl must be in place and locked before replacing double-blade cutter.
19. Do not attempt to defeat the interlock mechanisms.
20. Make sure reservoir lid is in place before operating appliance.
21. Keep hands and utensils away from the cutting blade while chopping food to
reduce the risk of severe injury to persons or damage to the food chopper. A
scraper may be used but only when the food chopper is not running.
22. The appliance does not contain any user serviceable parts. Do not dismantle.
23. Place appliance on a flat and stable surface.
24. Do not move the appliance when in use, when plugged or if it contains hot
water.
25. Use plastic bottles approved for boiling or glass thermo resistant bottles/
containers with this appliance.
26. Before connecting the appliance to the main power supply, check that the
voltage indicated on the specification plate (underneath the base) corresponds
to the local main voltage.
27. To prevent electric shock, do not open base.
28. For household use only.
29. Never use the steam function without water in the water reservoir.
SAVE THESE INSTRUCTIONS
IB Oster Baby 1791-033_12EFM1.indd 2-3 5/18/12 10:52 AM

4 5
Features Get To Know Your OsterTM Baby Nutricenter System
3
Introduction
Congratulations on your purchase of the OsterTM Baby Nutricenter System,
the ultimate baby food preparation system that helps caregivers satisfy babies’
nutritional needs from birth to 24 months.
Features and Benefits
• 16oz(480ml)steam/blendcontainer – Prepares up to six 4 oz servings of
baby food per use.
•Automaticshut-off – When steaming, warming or sterilizing cycle is complete,
the appliance changes to stand-by mode and automatically turns off the heating
element.
•Built-insecuritydevices – Modules must be properly assembled to engage the
security devices that allow the appliance to function.
•Largecapacitysterilizer – Sterilizes up to 6 wide or 8 tall bottles and
accessories.
•Modulardesign – Modules are interchangeable in the base and disassemble
for easy storing and cleaning.
•Nutrientrecovery – Nutrient collector cup captures nutrients from foods dur-
ing the steaming process.The nutrients can be easily added back to the food
during processing through the lid opening.
•Onesteam/blendcontainer– Steaming and processing without transferring
food allows for less mess and faster food preparation.
• This appliance can be purchased in 3 separate modules. Each module performs
one or more functions listed below:
  1.BabyFoodPreparationCenter
   (Model1791)
• Sterilizes bottles and accessories
• Warms bottles and baby foods
• Steams with steam/blend container
• Steams with Tri-level steam trays
• Processes baby food and purees
  2 . BabyFoodPreparationModule
   (Model1792)
• Steams with steam/blend container
• Processes baby food and purees
  3 . SterilizationModule
   (Model1795)
• Sterilizes bottles and accessories
•Water-volumebasedoperation –The amount of water used will determine
the cooking, warming and sterilizing time.
2
4 Steam/Blend
Container Parts
1. Steam/blend container
2. Steam/blend lid
3. Lid opening
4. Steam/blend screen
5. Stainless steel blade
6. Blade Holder
7. Lid release button
Base Parts
8. OsterTM Baby Nutricenter
Base – (Not dishwasher safe)
9. Control panel (see close up)
10. On / off button and power light
11. Steam button and steam light
12. Pulse button
13. Water reservoir
14. Water reservoir lid
15. Steam guide
16. Motor drive
1 7. Nutrient collector/measuring
cup
Sterilizer Parts
18. Sterilizer lid
19. Accessory tray
20. Bottle tray
21. Sterilizer base
22. Drain plug
23. Steam entry
5
7
1
6
10 14
12
15
13
11 16
9
8
17
18
23
19
20
21
IB Oster Baby 1791-033_12EFM1.indd 4-5 5/18/12 10:52 AM

4 5
Features Get To Know Your OsterTM Baby Nutricenter System
3
Introduction
Congratulations on your purchase of the OsterTM Baby Nutricenter System,
the ultimate baby food preparation system that helps caregivers satisfy babies’
nutritional needs from birth to 24 months.
Features and Benefits
• 16oz(480ml)steam/blendcontainer – Prepares up to six 4 oz servings of
baby food per use.
•Automaticshut-off – When steaming, warming or sterilizing cycle is complete,
the appliance changes to stand-by mode and automatically turns off the heating
element.
•Built-insecuritydevices – Modules must be properly assembled to engage the
security devices that allow the appliance to function.
•Largecapacitysterilizer – Sterilizes up to 6 wide or 8 tall bottles and
accessories.
•Modulardesign – Modules are interchangeable in the base and disassemble
for easy storing and cleaning.
•Nutrientrecovery – Nutrient collector cup captures nutrients from foods dur-
ing the steaming process.The nutrients can be easily added back to the food
during processing through the lid opening.
•Onesteam/blendcontainer– Steaming and processing without transferring
food allows for less mess and faster food preparation.
• This appliance can be purchased in 3 separate modules. Each module performs
one or more functions listed below:
  1.BabyFoodPreparationCenter
   (Model1791)
• Sterilizes bottles and accessories
• Warms bottles and baby foods
• Steams with steam/blend container
• Steams with Tri-level steam trays
• Processes baby food and purees
  2 . BabyFoodPreparationModule
   (Model1792)
• Steams with steam/blend container
• Processes baby food and purees
  3 . SterilizationModule
   (Model1795)
• Sterilizes bottles and accessories
•Water-volumebasedoperation –The amount of water used will determine
the cooking, warming and sterilizing time.
2
4 Steam/Blend
Container Parts
1. Steam/blend container
2. Steam/blend lid
3. Lid opening
4. Steam/blend screen
5. Stainless steel blade
6. Blade Holder
7. Lid release button
Base Parts
8. OsterTM Baby Nutricenter
Base – (Not dishwasher safe)
9. Control panel (see close up)
10. On / off button and power light
11. Steam button and steam light
12. Pulse button
13. Water reservoir
14. Water reservoir lid
15. Steam guide
16. Motor drive
1 7. Nutrient collector/measuring
cup
Sterilizer Parts
18. Sterilizer lid
19. Accessory tray
20. Bottle tray
21. Sterilizer base
22. Drain plug
23. Steam entry
5
7
1
6
10 14
12
15
13
11 16
9
8
17
18
23
19
20
21
IB Oster Baby 1791-033_12EFM1.indd 4-5 5/18/12 10:52 AM

6 7
24a
Warmer Parts
24. Warmer (assembled)
24a. Warmer holder
24b. Warmer base
25. Warmer steam entry
24b
24
25
27
26
Tri-level
Steamer Parts
26.Tri-level steam trays (3)
27.Tri-level steam trays lid
29
28
Storage
Container Parts
28. Food containers (3)
29. Food container lids (3)
Before First Use
1. Make sure the appliance is turned off and the power cord is unplugged.
2. Clean ALL PARTS (see “Cleaning and Maintenance”).
• NEVER IMMERSE THE STEAM/ BLEND BASE OR APPLIANCE BASE IN ANY LIQUID OR
PLACE IN THE DISHWASHER.
• CAUTION: THE BLADES ARE EXTREMELY SHARP. BE CAREFUL WHEN HANDLING STAIN
LESS STEEL BLADES.
Assembling the Steam/Blend Container
• The OsterTM Baby Nutricenter system comes with the steam/blend container (1)
and the steam/blend base (6) pre-assembled.
• Before using the steam/blend container to steam or process food, make sure the
steam/blend lid, steam/blend screen, stainless steel blade and steam/blend base
are securely assembled.
Opening and Closing the Steam/blend Container Lid (1)
1. To open, press and hold the lid release button (7), and twist the steam/blend lid
(2) from locked to unlocked .
2. To close, twist from unlocked to locked until the notch on the lid release
button (7) engages with the slot in the tab on steam/blend lid (2) and the lid is
secure.
• The Steam/blend screen must be installed for the lid to assemble to the
steam/ blend container (see “Attaching and Removing the Steam/blend
Screen” instructions below).
• The Steam/blend screen is not required when steaming with the tri-level steam
trays (see “Steaming with the Tri-Level Steam Trays” instructions for
assembling and operating this module).
Attaching and Removing the Steam/blend Screen (4)
1. To remove, pull the steam/blend screen (4) tab away from steam/blend lid (2).
2. To attach, align the center of the steam/blend screen (4) with the metal rod on
the bottom of the steam/blend lid (2). Align the steam/blend screen tab between
the two tabs on the steam/blend lid. Press the tab on the screen down until it
clicks into the steam/blend lid (2).
Attaching and Removing the Steam/blend Base (6)
IMPORTANT: The steam/blend base is not dishwasher-safe or waterproof. Never
immerse in any liquid. Make sure to remove the steam/blend base from the steam/
blend container when washing after each use. Follow “care and maintenance”
instructions.
1. To remove, twist from locked to unlocked and pull from the steam/blend
container (1).
2. To attach, twist from unlocked to locked to secure the steam/blend base (6)
to the steam/blend container (1).
Attaching and Removing the Stainless Steel Blade (5)
• Once the steam/blend lid (2) is removed, the stainless steel blade (5) can be
easily dropped onto the center column in the steam/blend container (1)
for use.
• The stainless steel blade (5) is easily removed by pulling it from the steam/
blend container (1).
•CAUTION:THEBLADEISSHARP.HANDLECAREFULLY.
IB Oster Baby 1791-033_12EFM1.indd 6-7 5/18/12 10:52 AM

6 7
24a
Warmer Parts
24. Warmer (assembled)
24a. Warmer holder
24b. Warmer base
25. Warmer steam entry
24b
24
25
27
26
Tri-level
Steamer Parts
26.Tri-level steam trays (3)
27.Tri-level steam trays lid
29
28
Storage
Container Parts
28. Food containers (3)
29. Food container lids (3)
Before First Use
1. Make sure the appliance is turned off and the power cord is unplugged.
2. Clean ALL PARTS (see “Cleaning and Maintenance”).
• NEVER IMMERSE THE STEAM/ BLEND BASE OR APPLIANCE BASE IN ANY LIQUID OR
PLACE IN THE DISHWASHER.
• CAUTION: THE BLADES ARE EXTREMELY SHARP. BE CAREFUL WHEN HANDLING STAIN
LESS STEEL BLADES.
Assembling the Steam/Blend Container
• The OsterTM Baby Nutricenter system comes with the steam/blend container (1)
and the steam/blend base (6) pre-assembled.
• Before using the steam/blend container to steam or process food, make sure the
steam/blend lid, steam/blend screen, stainless steel blade and steam/blend base
are securely assembled.
Opening and Closing the Steam/blend Container Lid (1)
1. To open, press and hold the lid release button (7), and twist the steam/blend lid
(2) from locked to unlocked .
2. To close, twist from unlocked to locked until the notch on the lid release
button (7) engages with the slot in the tab on steam/blend lid (2) and the lid is
secure.
• The Steam/blend screen must be installed for the lid to assemble to the
steam/ blend container (see “Attaching and Removing the Steam/blend
Screen” instructions below).
• The Steam/blend screen is not required when steaming with the tri-level steam
trays (see “Steaming with the Tri-Level Steam Trays” instructions for
assembling and operating this module).
Attaching and Removing the Steam/blend Screen (4)
1. To remove, pull the steam/blend screen (4) tab away from steam/blend lid (2).
2. To attach, align the center of the steam/blend screen (4) with the metal rod on
the bottom of the steam/blend lid (2). Align the steam/blend screen tab between
the two tabs on the steam/blend lid. Press the tab on the screen down until it
clicks into the steam/blend lid (2).
Attaching and Removing the Steam/blend Base (6)
IMPORTANT: The steam/blend base is not dishwasher-safe or waterproof. Never
immerse in any liquid. Make sure to remove the steam/blend base from the steam/
blend container when washing after each use. Follow “care and maintenance”
instructions.
1. To remove, twist from locked to unlocked and pull from the steam/blend
container (1).
2. To attach, twist from unlocked to locked to secure the steam/blend base (6)
to the steam/blend container (1).
Attaching and Removing the Stainless Steel Blade (5)
• Once the steam/blend lid (2) is removed, the stainless steel blade (5) can be
easily dropped onto the center column in the steam/blend container (1)
for use.
• The stainless steel blade (5) is easily removed by pulling it from the steam/
blend container (1).
•CAUTION:THEBLADEISSHARP.HANDLECAREFULLY.
IB Oster Baby 1791-033_12EFM1.indd 6-7 5/18/12 10:52 AM

8 9
IMPORTANT:
• Parts and accessories are for use with this appliance
only. Parts, including the food container lid, are not to
be boiled or microwaved.
• Place the appliance on a at and stable surface.
• Make sure the appliance and supply cord are out of
children’s reach.
1. Fill nutrient collector/measuring cup (17) to the
recommended water level (See table on page 13) and
pour it into the water reservoir (13).
WARNING: Do not overfill water reservoir. The bottle
or food container may be heated too long and the
food may be too hot for feeding.
2. Lock the water reservoir lid (14) into place on
the water reservoir (15) by twisting the double
arrow icon clockwise until the blend/warming
icon is aligned with the arrow at the base.
• Make sure the steam guide (15) is facing the warming
icon and is aligned with the steam icon
3. Lock the warmer (24) into place over the motor drive
(16) by twisting the arrow on the warmer (24) from
unlocked to locked .The warmer assembly is
now locked into position for Warming.
• Make sure the warmer steam entry (25) is fully
engaged with the water reservoir lid steam guide (16).
4. Place the bottle or food container in the center of the
warmer (24).
• Place food container lid (29) on container to pre-
vent food spills during warming.
5. Plug the power supply cord into an electrical outlet
and press the on / off button (10).
• A 1-second beep and illuminated power light will
indicate the OsterTM Baby Nutricenter is on.
6. Press the steam button (12).
• A 1-second beep and illuminated steam light will
indicate that WARMING has begun.
WARNING: During WARMING, the warmer
releases steam through the interior vent holes in
the warmer holder. Keep clear of the steam during
Warming to avoid injury.
• WARMING is complete when a 3 second beep is
sounded and the steam light turns off. The OsterTM
Baby Nutricenter System is now in stand-by mode
and the heating element is off.
7. Press on/off button (10).
• The power light turns off, indicating that the
OsterTM Baby Nutricenter is off.
8. Remove the bottle or food container for feeding.
WARNING: Bottle and food container are hot after
warming.
 WARNING: Allow sufficient time for the bottle or
food container to cool before handling or use oven
mitts to handle immediately.
• Shake bottle or mix food thoroughly to ensure even
temperature.
• Test the temperature of the food before feeding.
If food is not warm, then operate for another
WARMING cycle.
IMPORTANT:
• Bottles, accessories, toys and other objects should
be cleaned before sterilizing.
• This sterilizer does not sterilize up to clinical
standards.
• Place the appliance on a at and stable surface.
• Make sure the appliance and supply cord are out
of children’s reach.
• Ensure drain plug is secured to prevent leaking
during sterilizing.
1. Fill the water reservoir (13) to water level 3.
2. Lock the water reservoir lid (14) into place on the
water reservoir (13) by twisting the double arrow
icon counterclockwise until the sterilizer icon
is aligned with the arrow at the base.
3. Place the bottle tray (20) into the sterilizer base
(21).
• Place cleaned baby bottles upside down onto
the bottle tray (20).
4. Place the accessory tray (19) over the bottles,
onto the top interior edge of the sterilizer base
(20).
• Place accessories disassembled on top of the
accessory tray (19).
5. Cover with the sterilizer lid (18), slide sterilizer
towards the OsterTM Baby Nutricenter base until
the sterilizer steam entry (23) engages with the
water reservoir steam guide (15).
6. Plug the power supply cord into an electrical
outlet and press the on/off button (10).
• A 1-second beep and power light will indicate
the OsterTM Baby Nutricenter is on.
7. Press the steam button (11).
• A 1-second beep and illuminated steam light
will indicate STERILIZING has begun. Sterilizing
can be stopped at any time by pressing the
steam button (11).
  WARNING: During Steaming, the sterilizer
releases steam through the steam vent holes on
the top of the sterilizer lid. To avoid injury, keep
clear of the steam.
8. STERILIZING is complete when a 3 second beep
is sounded and the steam light turns off. The Os-
terTM Baby Nutricenter System appliance is now
in stand-by mode and the heating element is off.
9. Press the on/off button (10).
• The power light turns off, indicating that the
OsterTM Baby Nutricenter System is off.
10. Remove sterilized bottles and accessories as re-
quired for feeding. WARNING:Parts are hot after
sterilizing. Allow sufcient time for the sterilizer
lid, bottles and accessories to cool before han-
dling or use oven mitts to handle immediately.
11. Remove the drain plug (22) located on the bot-
tom of the sterilizer base (21) to release excess
condensation after sterilizing. WARNING:
Sterilized water is hot. Allow water to cool before
draining.
Esterilização
Sterilizing Warming
IB Oster Baby 1791-033_12EFM1.indd 8-9 5/18/12 10:52 AM

8 9
IMPORTANT:
• Parts and accessories are for use with this appliance
only. Parts, including the food container lid, are not to
be boiled or microwaved.
• Place the appliance on a at and stable surface.
• Make sure the appliance and supply cord are out of
children’s reach.
1. Fill nutrient collector/measuring cup (17) to the
recommended water level (See table on page 13) and
pour it into the water reservoir (13).
WARNING: Do not overfill water reservoir. The bottle
or food container may be heated too long and the
food may be too hot for feeding.
2. Lock the water reservoir lid (14) into place on
the water reservoir (15) by twisting the double
arrow icon clockwise until the blend/warming
icon is aligned with the arrow at the base.
• Make sure the steam guide (15) is facing the warming
icon and is aligned with the steam icon
3. Lock the warmer (24) into place over the motor drive
(16) by twisting the arrow on the warmer (24) from
unlocked to locked .The warmer assembly is
now locked into position for Warming.
• Make sure the warmer steam entry (25) is fully
engaged with the water reservoir lid steam guide (16).
4. Place the bottle or food container in the center of the
warmer (24).
• Place food container lid (29) on container to pre-
vent food spills during warming.
5. Plug the power supply cord into an electrical outlet
and press the on / off button (10).
• A 1-second beep and illuminated power light will
indicate the OsterTM Baby Nutricenter is on.
6. Press the steam button (12).
• A 1-second beep and illuminated steam light will
indicate that WARMING has begun.
WARNING: During WARMING, the warmer
releases steam through the interior vent holes in
the warmer holder. Keep clear of the steam during
Warming to avoid injury.
• WARMING is complete when a 3 second beep is
sounded and the steam light turns off. The OsterTM
Baby Nutricenter System is now in stand-by mode
and the heating element is off.
7. Press on/off button (10).
• The power light turns off, indicating that the
OsterTM Baby Nutricenter is off.
8. Remove the bottle or food container for feeding.
WARNING: Bottle and food container are hot after
warming.
 WARNING: Allow sufficient time for the bottle or
food container to cool before handling or use oven
mitts to handle immediately.
• Shake bottle or mix food thoroughly to ensure even
temperature.
• Test the temperature of the food before feeding.
If food is not warm, then operate for another
WARMING cycle.
IMPORTANT:
• Bottles, accessories, toys and other objects should
be cleaned before sterilizing.
• This sterilizer does not sterilize up to clinical
standards.
• Place the appliance on a at and stable surface.
• Make sure the appliance and supply cord are out
of children’s reach.
• Ensure drain plug is secured to prevent leaking
during sterilizing.
1. Fill the water reservoir (13) to water level 3.
2. Lock the water reservoir lid (14) into place on the
water reservoir (13) by twisting the double arrow
icon counterclockwise until the sterilizer icon
is aligned with the arrow at the base.
3. Place the bottle tray (20) into the sterilizer base
(21).
• Place cleaned baby bottles upside down onto
the bottle tray (20).
4. Place the accessory tray (19) over the bottles,
onto the top interior edge of the sterilizer base
(20).
• Place accessories disassembled on top of the
accessory tray (19).
5. Cover with the sterilizer lid (18), slide sterilizer
towards the OsterTM Baby Nutricenter base until
the sterilizer steam entry (23) engages with the
water reservoir steam guide (15).
6. Plug the power supply cord into an electrical
outlet and press the on/off button (10).
• A 1-second beep and power light will indicate
the OsterTM Baby Nutricenter is on.
7. Press the steam button (11).
• A 1-second beep and illuminated steam light
will indicate STERILIZING has begun. Sterilizing
can be stopped at any time by pressing the
steam button (11).
  WARNING: During Steaming, the sterilizer
releases steam through the steam vent holes on
the top of the sterilizer lid. To avoid injury, keep
clear of the steam.
8. STERILIZING is complete when a 3 second beep
is sounded and the steam light turns off. The Os-
terTM Baby Nutricenter System appliance is now
in stand-by mode and the heating element is off.
9. Press the on/off button (10).
• The power light turns off, indicating that the
OsterTM Baby Nutricenter System is off.
10. Remove sterilized bottles and accessories as re-
quired for feeding. WARNING:Parts are hot after
sterilizing. Allow sufcient time for the sterilizer
lid, bottles and accessories to cool before han-
dling or use oven mitts to handle immediately.
11. Remove the drain plug (22) located on the bot-
tom of the sterilizer base (21) to release excess
condensation after sterilizing. WARNING:
Sterilized water is hot. Allow water to cool before
draining.
Esterilização
Sterilizing Warming
IB Oster Baby 1791-033_12EFM1.indd 8-9 5/18/12 10:52 AM

10 11
IMPORTANT:
• Place the appliance on a at and stable surface.
• Make sure the appliance and supply cord are out of
children’s reach.
• To process food that does not require cooking, follow
the PROCESSING steps only, beginning at step 4.
1. Unlock the steam/blend container from the OsterTM
Baby Nutricenter system base (8).
• Twist handle from the locked to unlocked until
steam/blend lid (2) arrow aligns with unlocked .
2. Carefully remove the nutrient collector/measuring
cup (17) from the motor drive (16) and set aside.
WARNING:The liquid may be hot. Be careful when
handling.
3. Flip the steam/blend container (1) so the steam/blend
lid (2) is on top.
4. Lock steam/blend assembly into place over the
motor drive (16) by twisting from unlocked to
locked aligning the arrow on the steam/blend
container (1) to unlocked .
• To lock, twist the arrow to locked .The
steam/blend assembly is now locked into position
for PROCESSING.
5. Slowly pour the contents of the nutrient collector/
measuring cup (17) back into the steam/blend
container (1) through the lid opening (3) on the
steam/blend lid (2).
 WARNING: Liquid nutrients may be hot. Use caution
when handling.
• To achieve desired consistency, adjust the amount
of liquid you add to the baby food from the
nutrient collector/measuring cup (17).
6. Press the pulse button (12) to process the food to
desired consistency.
• Food is now ready to be served.
IMPORTANT:
Carefully remove the blade before serving food.
• Use the food containers (28) to store leftovers.
• To reheat, follow the WARMING instructions.
WARNING:
Food container and lid are not microwave-safe.
PREPARING BABY FOOD AND PUREES
Steaming with the Steam/Blend Container PREPARING BABY FOOD AND PUREES Processing with the Steam/blend Container
IMPORTANT:
• Place the appliance on a at and stable surface.
• Make sure the appliance and supply cord are out
of children’s reach.
• Make sure the nutrient collector/measuring cup
(17) is in place over the steam/blend base motor
drive (16) to catch all the nutrients that are
released when the food is steaming.This also
protects the motor drive (16) from spills.
1. Assemble the steam/blend container (1)
(See “Assembling Steam/Blend Container”
instructions).
2. Before steaming, wash all food thoroughly. For
best results, cut fruits, vegetables and meats
into approximately 1-inch cubes.
3. Assemble the steam/blend container screen (4)
and lid (2) (See attaching and Removing the
Steam/Blend Screen and Attaching and
Removing Steam/Blend Lid).
4. Fill the assembled steam/blend container (1)
with chopped food.
5. Depending on the type of food to be steamed,
fill the water reservoir (13) to the recommended
water level 1 2 3 . (See chart, page 14).
6. Lock the water reservoir lid (14) into place on the
water reservoir (15) by twisting the double arrow
icon clockwise until the blend/warming icon
is aligned with arrow at the base.
7. Place the nutrient collector/measuring cup (17)
over the steam/blend motor drive (16) to catch
the nutrients that release when the food is
steaming.
8. Once the lid (2) is locked into position, ip the
steam/blend container upside down.
• The lid (2) should be on the bottom.
9. Lock the steam/blend assembly into place over
the motor drive (16) by twisting the arrow on
the steam/blend lid (2) from unlocked to locked
The steam/blend assembly is now locked into
position for STEAMING.
10. Plug the power supply cord into an electrical
outlet and press the on/off button (10).
• When you hear a 1-second beep and the
power light turns on, indicating the appliance
is on.
11. Press the steam button (11).
• A 1-second beep and steam light will indicate
STEAMING has begun.
WARNING: During STEAMING, steam
releases through the steam outlet in the
steam/blend lid.
Keep clear of the steam to avoid injury.
• STEAMING is complete when a 3 second
beep is sounded and the steam light turns
off. Time varies depending on food and
water level.
• The OsterTM Baby Nutricenter system is now
in stand-by mode and the heating element is
off.
12. Press on/off button (10).
• The power light turns off indicating that the
OsterTM Baby Nutricenter system is off.
13. Serve as nger food or prepare baby food or
purees using the processor (See “Processing
with the Steam/Blend Container” instructions).
WARNING:Test the temperature of the food
before feeding. If food is not cooked, then cook
for another STEAMING cycle.
IB Oster Baby 1791-033_12EFM1.indd 10-11 5/18/12 10:52 AM

10 11
IMPORTANT:
• Place the appliance on a at and stable surface.
• Make sure the appliance and supply cord are out of
children’s reach.
• To process food that does not require cooking, follow
the PROCESSING steps only, beginning at step 4.
1. Unlock the steam/blend container from the OsterTM
Baby Nutricenter system base (8).
• Twist handle from the locked to unlocked until
steam/blend lid (2) arrow aligns with unlocked .
2. Carefully remove the nutrient collector/measuring
cup (17) from the motor drive (16) and set aside.
WARNING:The liquid may be hot. Be careful when
handling.
3. Flip the steam/blend container (1) so the steam/blend
lid (2) is on top.
4. Lock steam/blend assembly into place over the
motor drive (16) by twisting from unlocked to
locked aligning the arrow on the steam/blend
container (1) to unlocked .
• To lock, twist the arrow to locked .The
steam/blend assembly is now locked into position
for PROCESSING.
5. Slowly pour the contents of the nutrient collector/
measuring cup (17) back into the steam/blend
container (1) through the lid opening (3) on the
steam/blend lid (2).
 WARNING: Liquid nutrients may be hot. Use caution
when handling.
• To achieve desired consistency, adjust the amount
of liquid you add to the baby food from the
nutrient collector/measuring cup (17).
6. Press the pulse button (12) to process the food to
desired consistency.
• Food is now ready to be served.
IMPORTANT:
Carefully remove the blade before serving food.
• Use the food containers (28) to store leftovers.
• To reheat, follow the WARMING instructions.
WARNING:
Food container and lid are not microwave-safe.
PREPARING BABY FOOD AND PUREES
Steaming with the Steam/Blend Container PREPARING BABY FOOD AND PUREES Processing with the Steam/blend Container
IMPORTANT:
• Place the appliance on a at and stable surface.
• Make sure the appliance and supply cord are out
of children’s reach.
• Make sure the nutrient collector/measuring cup
(17) is in place over the steam/blend base motor
drive (16) to catch all the nutrients that are
released when the food is steaming.This also
protects the motor drive (16) from spills.
1. Assemble the steam/blend container (1)
(See “Assembling Steam/Blend Container”
instructions).
2. Before steaming, wash all food thoroughly. For
best results, cut fruits, vegetables and meats
into approximately 1-inch cubes.
3. Assemble the steam/blend container screen (4)
and lid (2) (See attaching and Removing the
Steam/Blend Screen and Attaching and
Removing Steam/Blend Lid).
4. Fill the assembled steam/blend container (1)
with chopped food.
5. Depending on the type of food to be steamed,
fill the water reservoir (13) to the recommended
water level 1 2 3 . (See chart, page 14).
6. Lock the water reservoir lid (14) into place on the
water reservoir (15) by twisting the double arrow
icon clockwise until the blend/warming icon
is aligned with arrow at the base.
7. Place the nutrient collector/measuring cup (17)
over the steam/blend motor drive (16) to catch
the nutrients that release when the food is
steaming.
8. Once the lid (2) is locked into position, ip the
steam/blend container upside down.
• The lid (2) should be on the bottom.
9. Lock the steam/blend assembly into place over
the motor drive (16) by twisting the arrow on
the steam/blend lid (2) from unlocked to locked
The steam/blend assembly is now locked into
position for STEAMING.
10. Plug the power supply cord into an electrical
outlet and press the on/off button (10).
• When you hear a 1-second beep and the
power light turns on, indicating the appliance
is on.
11. Press the steam button (11).
• A 1-second beep and steam light will indicate
STEAMING has begun.
WARNING: During STEAMING, steam
releases through the steam outlet in the
steam/blend lid.
Keep clear of the steam to avoid injury.
• STEAMING is complete when a 3 second
beep is sounded and the steam light turns
off. Time varies depending on food and
water level.
• The OsterTM Baby Nutricenter system is now
in stand-by mode and the heating element is
off.
12. Press on/off button (10).
• The power light turns off indicating that the
OsterTM Baby Nutricenter system is off.
13. Serve as nger food or prepare baby food or
purees using the processor (See “Processing
with the Steam/Blend Container” instructions).
WARNING:Test the temperature of the food
before feeding. If food is not cooked, then cook
for another STEAMING cycle.
IB Oster Baby 1791-033_12EFM1.indd 10-11 5/18/12 10:52 AM

12 13
PREPARING BABY FOOD AND PUREES
Steaming with the Tri-Level Steam Trays Cleaning and Maintenance
1. Always make sure the appliance is off and unplugged from the electrical outlet
before cleaning.
• Disassemble all parts.
• Clean the steam/blend base and OsterTM Baby Nutricenter system base
with a soft, damp cloth.
   WARNING:THESTEAM/BLENDBASEANDAPPLIANCEBASEARENOT
   DISHWASHER-SAFEORWATERPROOF.NEVERIMMERSEINANYLIQUID.
• Wash the following parts on the top shelf of the dishwasher:
- steam/blend container
- steam/blend lid
- steam/blend screen
- stainless steel blade
- water reservoir lid
- nutrient collector/measuring cup
- sterilizing lid
- accessory tray
- bottle tray
- sterilizing base
- warmer holder and warmer base
- tri-level steam trays and lid
- food containers and lids
2. We suggest storing the OsterTM Baby Nutricenter system on a dry counter or
kitchen tabletop for easy access.
The bottle sterilizing module can be conveniently placed in the baby’s room or
kitchen, depending on your needs.
Water Level Guide
Warming
Bottles 8 oz Room
Room
30ml / 1oz
60ml / 2oz
30ml / 1oz
60ml / 2oz
Refrigerated
Refrigerated
Food 8
oz (in food
container
ONLY)
Sterilizing
Tall bottles (Max 8) 236ml /8oz
Wide Bottles (Max 6) 236ml /8oz
IMPORTANT:
• Place the appliance on a at and stable surface.
• Make sure the appliance and supply cord are out
of children’s reach.
• Make sure to place the nutrient collector/
measuring cup (17) over the motor drive (16) to
catch the nutrients that release when the food
is steaming.This also protects the motor drive
(16) from spills.
1. Before steaming, wash foods thoroughly. For best
results, cut fruits, vegetables and meats into
approximately 1-inch cubes.
2. Fill each tri-level steam tray (26) with chopped
foods.
• If steaming a variety of foods at one time,
place meats and fish in the lower trays and
fruits and vegetables in the upper trays.
3. Depending on the type of food to be steamed, fill
the water reservoir (13) to the suggested water
level 1 2 3 (See chart on page 14).
4. Lock the water reservoir lid (14) into place on the
water reservoir (15) by twisting the double arrow
icon clockwise until the blend/warming icon
is aligned with the arrow at the base.
5. Place the nutrient collector/measuring cup (17)
over the motor drive (16) to catch the nutrients
that release when the food is steaming.
6. Lock steam/blend lid (2) into place over the motor
drive by twisting the arrow from unlocked to
locked (see “Attaching and Removing Steam/
Blend Screen“ instructions).
7. Firmly place the tri-level steam trays (26) filled
with food on top of the steam / blend lid (2),
stacking them on top of each other.
8. Cover with the tri-level steam trays lid (27).
9. Plug the power supply cord into an electrical
outlet and press the on/off button (10).
• A 1-second beep and illuminated power light
will turn on, indicate the OsterTM Baby
Nutricenter is on.
10. Press the steam button (11) .
• A 1-second beep and illuminated steam light
(12), indicate STEAMING has begun.
WARNING: During STEAMING, steam
releases through the steam outlet in the steam/
blend lid. Keep clear of the steam to avoid
injury.
• STEAMING is complete when a 3 second beep
is sounded and the steam light turns off. Time
varies depending on food and water level.
• The OsterTM Baby Nutricenter system is now
in stand-by mode and the heating element
is off.
11. Press on/off button (10).
• The power light turns off, indicating the
OsterTM Baby Nutricenter system is off.
12. Serve as nger food or prepare baby food or
purees using the processor (See “Processing with
the Steam/Blend Container”).
WARNING: Steam/blend container is hot after
STEAMING. Allow sufcient time for the steam/
blend container to cool or use oven mitts to
handle immediately.
WARNING:Test the temperature of the food
before feeding. If food is not cooked, then cook
for another STEAMING cycle. Test again before
serving.
Item Temperature WaterLevelInput
Item  WaterLevelInput
236ml /8oz
236ml /8oz
IB Oster Baby 1791-033_12EFM1.indd 12-13 5/18/12 10:52 AM

12 13
PREPARING BABY FOOD AND PUREES
Steaming with the Tri-Level Steam Trays Cleaning and Maintenance
1. Always make sure the appliance is off and unplugged from the electrical outlet
before cleaning.
• Disassemble all parts.
• Clean the steam/blend base and OsterTM Baby Nutricenter system base
with a soft, damp cloth.
   WARNING:THESTEAM/BLENDBASEANDAPPLIANCEBASEARENOT
   DISHWASHER-SAFEORWATERPROOF.NEVERIMMERSEINANYLIQUID.
• Wash the following parts on the top shelf of the dishwasher:
- steam/blend container
- steam/blend lid
- steam/blend screen
- stainless steel blade
- water reservoir lid
- nutrient collector/measuring cup
- sterilizing lid
- accessory tray
- bottle tray
- sterilizing base
- warmer holder and warmer base
- tri-level steam trays and lid
- food containers and lids
2. We suggest storing the OsterTM Baby Nutricenter system on a dry counter or
kitchen tabletop for easy access.
The bottle sterilizing module can be conveniently placed in the baby’s room or
kitchen, depending on your needs.
Water Level Guide
Warming
Bottles 8 oz Room
Room
30ml / 1oz
60ml / 2oz
30ml / 1oz
60ml / 2oz
Refrigerated
Refrigerated
Food 8
oz (in food
container
ONLY)
Sterilizing
Tall bottles (Max 8) 236ml /8oz
Wide Bottles (Max 6) 236ml /8oz
IMPORTANT:
• Place the appliance on a at and stable surface.
• Make sure the appliance and supply cord are out
of children’s reach.
• Make sure to place the nutrient collector/
measuring cup (17) over the motor drive (16) to
catch the nutrients that release when the food
is steaming.This also protects the motor drive
(16) from spills.
1. Before steaming, wash foods thoroughly. For best
results, cut fruits, vegetables and meats into
approximately 1-inch cubes.
2. Fill each tri-level steam tray (26) with chopped
foods.
• If steaming a variety of foods at one time,
place meats and fish in the lower trays and
fruits and vegetables in the upper trays.
3. Depending on the type of food to be steamed, fill
the water reservoir (13) to the suggested water
level 1 2 3 (See chart on page 14).
4. Lock the water reservoir lid (14) into place on the
water reservoir (15) by twisting the double arrow
icon clockwise until the blend/warming icon
is aligned with the arrow at the base.
5. Place the nutrient collector/measuring cup (17)
over the motor drive (16) to catch the nutrients
that release when the food is steaming.
6. Lock steam/blend lid (2) into place over the motor
drive by twisting the arrow from unlocked to
locked (see “Attaching and Removing Steam/
Blend Screen“ instructions).
7. Firmly place the tri-level steam trays (26) filled
with food on top of the steam / blend lid (2),
stacking them on top of each other.
8. Cover with the tri-level steam trays lid (27).
9. Plug the power supply cord into an electrical
outlet and press the on/off button (10).
• A 1-second beep and illuminated power light
will turn on, indicate the OsterTM Baby
Nutricenter is on.
10. Press the steam button (11) .
• A 1-second beep and illuminated steam light
(12), indicate STEAMING has begun.
WARNING: During STEAMING, steam
releases through the steam outlet in the steam/
blend lid. Keep clear of the steam to avoid
injury.
• STEAMING is complete when a 3 second beep
is sounded and the steam light turns off. Time
varies depending on food and water level.
• The OsterTM Baby Nutricenter system is now
in stand-by mode and the heating element
is off.
11. Press on/off button (10).
• The power light turns off, indicating the
OsterTM Baby Nutricenter system is off.
12. Serve as nger food or prepare baby food or
purees using the processor (See “Processing with
the Steam/Blend Container”).
WARNING: Steam/blend container is hot after
STEAMING. Allow sufcient time for the steam/
blend container to cool or use oven mitts to
handle immediately.
WARNING:Test the temperature of the food
before feeding. If food is not cooked, then cook
for another STEAMING cycle. Test again before
serving.
Item Temperature WaterLevelInput
Item  WaterLevelInput
236ml /8oz
236ml /8oz
IB Oster Baby 1791-033_12EFM1.indd 12-13 5/18/12 10:52 AM

14 15
Water Level Guide (cont.) One Year Limited Warranty
Steaming with the steam/blend container Sunbeam Products, Inc. doing business as jarden Consumer Solutions or if
in Canada, sunbeam Corporation (Canada) Limited doing business as Jarden
Consumer Solutions (collectively “JCS”) Limited doing business as Jarden
Consumer Solutions (collectively “JCS”) warrants that for a period of one year
from the date of purchase, this product will be free from defects in material and
workmanship. JCS, at its option, will repair or replace this product or any component
of the product found to be defective during the warranty period. Replacement will
be made with a new or remanufactured product or component. If the product is
no longer available, replacement may be made with a similar product of equal or
greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust
any electrical or mechanical functions on this product. Doing so will void this
warranty.
This warranty is valid for the original retail purchaser from the date of initial retail
purchase and is not transferable. Keep the original sales receipt. Proof of purchase
is required to obtain warranty performance. JCS dealers, service centers, or retail
stores selling JCS products do not have the right to alter, modify or any way change
the terms and conditions of this warranty.
This warranty does not cover normal wear of parts or damage resulting from any of
the following: negligent use or misuse of the product, use on improper voltage or
current, use contrary to the operating instructions, disassembly, repair or alteration
by anyone other than JCS or an authorized JCS service center. Further, the warranty
does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.
What are the limits on JCS’s Liability?
JCS shall not be liable for any incidental or consequential damages caused by the
breach of any express, implied or statutory warranty or condition.
Except to the extent prohibited by applicable law, any implied warranty or condition
of merchantability or fitness for a particular purpose is limited in duration to the
duration of the above warranty.
JCS disclaims all other warranties, conditions or representations, express, implied,
statutory or otherwise.
JCS shall not be liable for any damages of any kind resulting from the purchase, use
or misuse of, or inability to use the product including incidental, special, consequential
or similar damages or loss of profits, or for any breach of contract, fundamental or
otherwise, or for any claim brought against purchaser by any other party.
Some provinces, states or jurisdictions do not allow the exclusion or limitation of
incidental or consequential damages or limitations on how long an implied warranty
lasts, so the above limitations or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights that
vary from province to province, state to state or jurisdiction to jurisdiction.
How To Obtain Warranty Service
In the U.S.A.
If you have any question regarding this warranty or would like to obtain warranty
service, please call 1 800-334-0759 and a convenient service center address will be
provided to you.
In Canada
If you have any question regarding this warranty or would like to obtain warranty
service, please call 1 800-667-8623 and a convenient service center address will be
provided to you.
In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business
as Jarden Consumer Solutions located in Boca Raton, Florida 33431. In Canada,
this warranty is offered by Sunbeam Corporation (Canada) Limited doing business
as Jarden Consumer Solutions, located at 20B Hereford Street, Brampton, Ontario
L6Y 0M1. If you have any other problem or claim in connection with this product,
please write to Consumer Service Department.
PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF
THESE ADDRESSES OR TO THE PLACE OF PURCHASE.
30ml / 1oz
60ml / 2oz
Level 3
Fruits
Vegetables
Chicken
Level 3
Meat
Level 3
Fish
Steaming with the tri-level trays*
Fruits 30ml / 1oz
60ml / 2oz
Level 3
Vegetables
Chicken
Level 3
Meat
Level 3
Fish
* If combining more than one type of food, use highest water level input.
Troubleshooting
OsterTM Baby Nutricenter System Troubleshooting Chart
• OsterTM Baby Nutricenter system is ready for use. Start
STEAMING, WARMING, STERILIZING or PROCESS-
ING.
• To put the appliance in stand-by mode, or to turn power
off, press the power button. Power light will turn off.
OsterTM Baby Nutricenter
system beeps once and
power light turns on.
In STEAMING, WARMING or
STERILIZING mode:
You hear 3 beeps and the
steam light turns off or is
blinking.
• Steamer, warmer, or sterilizer module is not prop-
erly assembled.
• See “Sterilizing”, “Warming” or “Processing Baby
Food and Purees” instructions to properly engage
module with the base, then follow instructions to
operate the module.
• The STEAMING, WARMING or STERILIZING cycle is
complete.
• Water Reservoir is empty; rell with water according
to the recipe, then follow instructions to operate the
module.
In STEAMING, WARMING or
STERILIZING mode:
You hear 1 long beep and the
steam light turns off.
At start of the PROCESSING
mode, you hear 3 beeps. • Processor module is not properly assembled.
• See “Processing Baby Food and Purees” instructions
to properly engage module with the base, then follow
instructions to operate the module.
FoodType  WaterLevel
FoodType  WaterLevel
Situation Solution
IB Oster Baby 1791-033_12EFM1.indd 14-15 5/18/12 10:52 AM

14 15
Water Level Guide (cont.) One Year Limited Warranty
Steaming with the steam/blend container Sunbeam Products, Inc. doing business as jarden Consumer Solutions or if
in Canada, sunbeam Corporation (Canada) Limited doing business as Jarden
Consumer Solutions (collectively “JCS”) Limited doing business as Jarden
Consumer Solutions (collectively “JCS”) warrants that for a period of one year
from the date of purchase, this product will be free from defects in material and
workmanship. JCS, at its option, will repair or replace this product or any component
of the product found to be defective during the warranty period. Replacement will
be made with a new or remanufactured product or component. If the product is
no longer available, replacement may be made with a similar product of equal or
greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust
any electrical or mechanical functions on this product. Doing so will void this
warranty.
This warranty is valid for the original retail purchaser from the date of initial retail
purchase and is not transferable. Keep the original sales receipt. Proof of purchase
is required to obtain warranty performance. JCS dealers, service centers, or retail
stores selling JCS products do not have the right to alter, modify or any way change
the terms and conditions of this warranty.
This warranty does not cover normal wear of parts or damage resulting from any of
the following: negligent use or misuse of the product, use on improper voltage or
current, use contrary to the operating instructions, disassembly, repair or alteration
by anyone other than JCS or an authorized JCS service center. Further, the warranty
does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.
What are the limits on JCS’s Liability?
JCS shall not be liable for any incidental or consequential damages caused by the
breach of any express, implied or statutory warranty or condition.
Except to the extent prohibited by applicable law, any implied warranty or condition
of merchantability or fitness for a particular purpose is limited in duration to the
duration of the above warranty.
JCS disclaims all other warranties, conditions or representations, express, implied,
statutory or otherwise.
JCS shall not be liable for any damages of any kind resulting from the purchase, use
or misuse of, or inability to use the product including incidental, special, consequential
or similar damages or loss of profits, or for any breach of contract, fundamental or
otherwise, or for any claim brought against purchaser by any other party.
Some provinces, states or jurisdictions do not allow the exclusion or limitation of
incidental or consequential damages or limitations on how long an implied warranty
lasts, so the above limitations or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights that
vary from province to province, state to state or jurisdiction to jurisdiction.
How To Obtain Warranty Service
In the U.S.A.
If you have any question regarding this warranty or would like to obtain warranty
service, please call 1 800-334-0759 and a convenient service center address will be
provided to you.
In Canada
If you have any question regarding this warranty or would like to obtain warranty
service, please call 1 800-667-8623 and a convenient service center address will be
provided to you.
In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business
as Jarden Consumer Solutions located in Boca Raton, Florida 33431. In Canada,
this warranty is offered by Sunbeam Corporation (Canada) Limited doing business
as Jarden Consumer Solutions, located at 20B Hereford Street, Brampton, Ontario
L6Y 0M1. If you have any other problem or claim in connection with this product,
please write to Consumer Service Department.
PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF
THESE ADDRESSES OR TO THE PLACE OF PURCHASE.
30ml / 1oz
60ml / 2oz
Level 3
Fruits
Vegetables
Chicken
Level 3
Meat
Level 3
Fish
Steaming with the tri-level trays*
Fruits 30ml / 1oz
60ml / 2oz
Level 3
Vegetables
Chicken
Level 3
Meat
Level 3
Fish
* If combining more than one type of food, use highest water level input.
Troubleshooting
OsterTM Baby Nutricenter System Troubleshooting Chart
• OsterTM Baby Nutricenter system is ready for use. Start
STEAMING, WARMING, STERILIZING or PROCESS-
ING.
• To put the appliance in stand-by mode, or to turn power
off, press the power button. Power light will turn off.
OsterTM Baby Nutricenter
system beeps once and
power light turns on.
In STEAMING, WARMING or
STERILIZING mode:
You hear 3 beeps and the
steam light turns off or is
blinking.
• Steamer, warmer, or sterilizer module is not prop-
erly assembled.
• See “Sterilizing”, “Warming” or “Processing Baby
Food and Purees” instructions to properly engage
module with the base, then follow instructions to
operate the module.
• The STEAMING, WARMING or STERILIZING cycle is
complete.
• Water Reservoir is empty; rell with water according
to the recipe, then follow instructions to operate the
module.
In STEAMING, WARMING or
STERILIZING mode:
You hear 1 long beep and the
steam light turns off.
At start of the PROCESSING
mode, you hear 3 beeps. • Processor module is not properly assembled.
• See “Processing Baby Food and Purees” instructions
to properly engage module with the base, then follow
instructions to operate the module.
FoodType  WaterLevel
FoodType  WaterLevel
Situation Solution
IB Oster Baby 1791-033_12EFM1.indd 14-15 5/18/12 10:52 AM

For product questions contact:
Sunbeam Consumer Service USA: 1.800.334.0759 Canada : 1.800.667.8623
www.oster.ca
©2012 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions.
All rights reserved. Imported and distributed by Sunbeam Corporation (Canada) Limited
doing business as Jarden Consumer Solutions, 20B Hereford Street, Brampton,
Ontario L6Y 0M1.
Pour toutes questions relatives au produit, communiquez
avec le service à la clientèle de Sunbeam –
États-Unis: 1 800 334.0759, Canada: 1 800 667.8623
www.oster.ca
©2012 Sunbeam Products, Inc. faisant affaires sous le nom de Jarden Consumer Solutions.
Tous droits réservés. Importé et distribué par Sunbeam Corporation (Canada) Limited
faisant affaires sous le nom de Jarden Consumer Solutions, 20B Hereford Street,
Brampton (Ontario) L6Y 0M1.
Printed in China Imprimé en Chine
GCDS-OST25589-DL
IB Oster Baby 1791-033_12EFM1.indd 30 5/18/12 10:52 AM