Otto OSLO OTOSLHBLBK User manual

ASSEMBLY INSTRUCTIONS
OSLO EXECUTIVE CHAIR
OTOSLHBLBK/OTOSLHBLBR
1/8

Assemble item on a clean flat surface
2/7
Officeworks Pty Ltd. I 236-262 East Boundary Road I East Bentleigh I 3165 I AUSTRALIA

AX5 BX1 CX1
DX1 EX1 FX1
GX1 IX4
JX4 KX6
5/16 X 32MM 1/4 X 25MM M5
3/8
Hx1(L&R)
H(R) H(L)
RL
LX1
1/4X22MM

4/8
A
B
C
B

D
3
E
4
5/8
B
F
I
LIx4
Lx1
FRONT
FRENTE
DEVANT
FRONT
FRENTE
DEVANT
FRONT
M5

5
6/8
J
Jx4
Lx1
G
6
E
K
H(R) H(L)
H
L
E
E
H
Kx6
Lx1
L
FRONT
FRENTE
DEVANT
FRONT
FRENTE
DEVANT
FRONT
FRONT
M5
M5

7/8
FD
7
8
To Adjust Tension On The Tilt: Reach under
the front centre of the chair, grasp the
round knob and turn it counter clockwise
to stiffen the tilt mechanism for a firmer
tilt resistance. Turn the knob clockwise to
loosen the tilt mechanism for a lighter
tilt resistance. Rotate the knob until the
desired resistance is reached.

8/8
WARNING
Do not tighten the screws before all screws are in the right place.
Do not use this chair unless all bolts, screws and knobs are firmly secured.
At least every 4 months, check all bolts, screws and knobs to be sure they
are tight.
If parts are missing, broken, damaged or worn, stop using the product until
repairs are made, using factory authorised parts.
Failure to follow these warnings would result in serious injury.
Thank you for your purchase. Please retain your receipt to validate warranty.
If you’ d like to know more about Officeworks’ furniture product, please visit
www.officeworks.com.au.
9