Otto STOCKHOLM OTSTOCWSBK User manual

ASSEMBLY INSTRUCTIONS
1/16
This design and instruction booklet is subject to copyright. 1 Carton
www.officeworks.com.au
For spare parts or hardware call 1300 OFFICE
STOCKHOLM CORNER WORKSTATION
OTSTOCWSBK
OTSTOCWSWB

2/16
Furniture Assem bly Ins
Estimated Assembly Time:
Assembly Video
Customer Service Contact Details
Spare Parts & Hardware
1300 OFFICE
People Required
General Advice
•To view an assembly video, go to https://www.officeworks.com.au/
•Search the product by item code or name:
•Click on the icon to watch the video.
90minutes

3/16
Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA
Tools Required
CAUTION: Do not use tools other than those required, as this
can damage your new item.
NOTE
•Please check you have all hardware before assembling.
•If you are missing any hardware, please contact the store of purchase.
•Please ensure you have the name of the item, required hardware part and quantity.
•Please retain your receipt as proof of purchase to validate your warranty.
CAUTION
•Do not tighten screws before all screws are in the right place.
•Do not use this product unless all bolts, screws and knobs are firmly secured.
•Check that all bolts, screws and knobs are securely tightened at least every 4 months.
WARNING
•If parts are missing, broken, damaged or worn stop using the product until all repairs
are made using manufacturer authorised parts.
•Failure to follow these warnings could result in serious injury.
DANGER
•CHILDREN MUST BE SUPERVISED.

4/16
1pc 1pc
1pc1pc1pc
1pc1pc1pc
1pc
1pc 1pc 1pc
2pcs 2pcs
2pcs3pcs2pcs
2pcs
Parts List

26 27
10
12
5x50mm
M6x40mm
2pcs
7pcs
28pcs
5x30mm
4x35mm 5x40mm
3x12mm
5/16
G
GG
Q
8pcs
8pcs
3x14mm
(CL)
(DL) (DR)
(CR)
300mm
300mm 300mm
300mm
Φ6x30mm Φ Φ
Φ
ΦΦ
Φ
Φ
Φ
Φ
1pc
1pc
1pc
1pc1pc
2pcs
2pcs
2pcs
2pcs
Included Hardware
Parts List

Step 1
Step 2
6/16
(CL) G(CR)
(CR)
(CR)
CR
(CL)
(CL)
CL
Assembly

Step 3
Step 4
7/16

Step 5
Step 6
8/16

27
Step 7
Step 8
9/16

8pcs
Step 9
Step 10
10/16

2pcs
Step 11
11/16

Step 12
12/16
J
J
Q
Q
J
8pcs 8pcs
Q

Step 13
Step 14
13/16
GG
(DL)
G(DL)
(DR)
G(DR)
DL
DR

Step 15
Step 16
14/16
GG
(DL) (DR)
G(DL)
G(DR)
DL
DR

Step 17
15/16
Step 18
Holes for A4
suspension files
Holes for foolscap
suspension files
Could decide during installation if you want foolscap or A4

Step 20
Step 19
Place the assembled drawers into the frame by aligning the slide runners of the drawers with the
runners on the unit. If the drawer does not slide in smoothly, remove the drawer to ensure the
alignment on both sides are correct. Push the drawers all the way into the unit until it stops.
O
O
Ball bearing
Front
Ball bearing
16/16
NOTE: maximum weight capacity
Desktop 50kg
Stationery drawer 3kg Shelf 15kg
Filing drawer 10kg
CAUTION: This product is intended to hold the maximum weight indicated.
Exceeding the maximum weight will result in instability and may cause injury.
Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products,
please visit www.officeworks.com.au
MAXIMUM WEIGHT CAPACITY