Otto COPENHAGEN OTCOPENGR User manual

OTCOPENGR/OTCOPENBL/OTCOPENPK
1/8
Weight capacity:130kg
This design & instruction booklet is subject to copyright
www.officeworks.com.au
For spare parts or hardware call 1300 OFFICE
ASSEMBLY INSTRUCTIONS
COPENHAGEN HIGH BACK CHAIR
1 CTN

2/ 2
Customer Service Contact Details
Spare Parts & Hardware
1300 OFFICE
People Required
General Advice
2/9
Furniture Assembly Instructions S tyle Guide
Estimated Assembly Time: 20 minutes
Assembly Video
To view an assembly video, go to https://www.officeworks.com.au/
Search the product by item code or name:
Click on the icon to watch the video.

3/9
Officeworks Ltd. 236-262 East Boundary Road Bentleigh East VIC 3165 AUSTRLIA
NOTE
•Please check you have all hardware before assembling.
•If you are missing any hardware, please contact the store of purchase.
•Please ensure you have the name of the item, required hardware part & quantity.
•Please retain your receipt as proof of purchase to validate your warranty.
CAUTION
•Do not tighten screws before all screws are in the right place.
•Do not use this product unless all bolts, screws & knobs are firmly secured.
•Check that all bolts &screws are securely tightened at least every 4 m onths.
WARNING
•If parts are missing, broken, damaged or worn stop using the product until all repairs are made
using manufacturer authorised parts.
•
Failure to follow these warnings could result in serious injury.
DANGER
CHILDREN MUST BE SUPERVISED.
••
•

4/9
Parts List
Hardware List

Step 1
Step 2
5/9
B
A
C
B

Step 3
Step 4
6/9
FRONT
J
H
HHX4
JX1
M5
D
E
E
B
C
D

Step 5
Step 6
7/9
JI
G
R
E
E
L
I
II
I
J
F
F
IX4
M5
M5
JX1
JX1
IX2
Do not tighten screws fully until you have completed assembling of the backrest
Do not tighten screws fully until you have completed assembling of the backrest

Step 7
Step 8
8/9
I
I
I
IX2
JX1
J
M5
K
K
KX8
Once backrest has been completely assembled, you can tighten all screws fully.
Install covers over all screws.

9/9
Padded flip-back armrests
To increase chair height pull
lever upward while lifting body
weight slightly off the seat.
Release lever at desired height.
To lower chair height sit fully into
the chair & pull lever upward.
Chair Height Adjustment
Release lever at desired height.
Your feet should be resting flat on
the floor.
Turn continuously to adjust how
quickly chair tilts back & forth.
Adjustable Tilt Tension Control
Note: if adjusting while sitting in chair
Turn knob left to tighten tension.
Turn knob right to loosen tension.
While seated, reach under the right side of the chair
to find the height adjustment handle.
Pull the handle all the way out (away from the gas lift)
to allow chair to tilt back or forth. To lock the chair
in the upright or vertical position, sit upright & push
the handle in towards the gas lift.
Chair Tilt
Care Instructions-Fabric Chairs
Clean, check & tighten all parts regularly.
Wipe over surfaces with damp cloth rinsed in warm water & mild detergent.
Dust & vacuum chair fabric to remove dust & dirt.