Outback MS4464 User manual

0359
Assembly and Operating Instructions for Outback®
Meteor Stainless Steel 4 and
Meteor Stainless steel 6 Burner Gas BBQ
Drawings are not to scale.
Specifications subject to change
without prior notice.
WARNING
• For outdoor use only. Not for commercial use.
• Read instructions before using the appliance. Failure to follow instructions could
result in death, serious bodily injury, and/or property loss.
• Warning: accessible parts may be very hot. Keep young children and pets away.
• Do not move the appliance during use.
• Turn off the gas supply at the gas bottle after use.
• Any modification of the appliance, misuse, or failure to follow the instructions may
be dangerous and will invalidate your warranty. This does not affect your statutory
rights.
• Retain these instructions for future reference.
• Leak test annually, and whenever the gas bottle is removed or replaced. Check that
the hose connections are tight and leak test each time you reconnect the gas bottle.
• For Flare-up control please refer to the ‘OPERATION’ section of this manual.
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open barbecue lid or hood.
4. If odour continues, discontinue use and
contact your local dealer.
FOR YOUR SAFETY
1. Do not store or use petrol or other flammable
vapours or liquids in the vicinity of this or any
other appliance.
2. A gas bottle not connected for use must not be
stored in the vicinity of this or any other
appliance.
MS4464 MS5664

2
CODE PART QTY
Outback®
Meteor Stainless Steel
4 Burner Gas BBQ
Outback®
Meteor Stainless Steel
6 Burner Gas BBQ
HOOD
A1 Hood (Pre-Assembled to Body) 1  
A2 Hood Handle 1  
A3 Warming Rack 1  
BODY
B1 Barbecue Body 1  
B2 Burner 4 6
B3 Control Panel 1  
B4 Knob 4 6
B5 Hose and Regulator Assembly 1  
B6 Lava Rock 1  
B7 Lava Rock Basket 1  
B8 Cooking Grill 1  
B9 Cooking Griddle 1  
B10 Drip Tray Left Bracket 1  
B11 Drip Tray Right Bracket 1  
B12 Drip Tray 1  
B13 Drip Pan 1  
B14 Ignition Button 1  
TROLLEY
C1 Side Burner Shelf 1  
C2 Side Burner Shelf Panel 1  
C3 Side Shelf 1  
C4 Side Shelf Panel 1  
C5 Side Burner Grid 1  
C6 Side Burner Lid 1  
C7 Side Burner Lid Axle 1  
C8 Side Burner Firebox 1  
C9 Side Burner Electrode 1  
C10 Knob Bezel 1  
C11 Side Burner Knob 1  
C12 Sear Burner 1  
C13 Side Burner Drip Tray 1  
C14 Body Support A 2  
C15 Body Support B 2  
C16 Left Cabinet Panel Assembly 1 
C17 Right Cabinet Panel Assembly 1 
C18 Upper Support 1  
C19 Door Handle 2 
C20 Left Door 1  
C21 Right Dorr 1  
C22 Basket 1 
C23 Bottom Panel 1  
C24 Front W heel Skirt 1  
C25 Left Wheel Skirt 1 
C26 Right W heel Skirt 1  
C27 Balance Weight 1  
C28 Lockable Caster 2  
C29 Caster 2  
HARDWARE
D1 M6x40 Bolt 16  
D2 M6x15 Bolt 20  
D3 M4 Nut 7  
D4 ST4.0x10 Screw 16  
D5 ST4.0x10 Screw F# 1  
D6 M6 Nut 12  
D7 M5x15 Bolt 2  
D8 M4x10 Bolt 21  
Pre-Assembled Component
Quantity varies according to model purchased
 Appearance, size, and construction may differ according to model purchased
Parts List
Quantity varies according to model purchased. Specifications subject to change without prior notice. For
more details on hardware, please see the corresponding ‘Hardware Reference Diagram’.

3
Parts Diagram
Quantity varies according to model purchased. Specifications subject to change without prior notice. For
more details on hardware, please see the corresponding ‘Hardware Reference Diagram’.
A2
A3
B1
B2
B4
B6
B8
B10 B11
C1
C5
B14
C26
B9
B12
C23
C19
C24
B7
C12
C11
C10
C25
C20 C21
B13
B3
A1
C3
B5
C29
C28
C22
C27
C18
C2 C4
C6
C7
C8
C13
C17C16
C15
C14
C9

4
Hardware Reference Diagram
Specifications subject to change without prior notice.
D1 D2
D4
D6
D8
D3
D5
D7

5
Assembly
IMPORTANT!
• TOOLS NEEDED FOR ASSEMBLY: Medium size flat blade or Phillips/Crosspoint screwdriver,
adjustable spanner or metric spanner set.
• Remove any internal component or packaging from the barbecue body.
• Whilst every care is taken in the manufacture of this product, care must be taken during assembly in
case sharp edges are present.
• Please read the Important Information section carefully before assembly and use of your
barbecue.
1
2
Attach the left cabinet panel assembly (C16) and right cabinet panel assembly (C17) to
the Bottom Panel (C23) using M6x40 Bolts (D1x8pcs) and M6 Nuts (D6x8pcs),
ST4.0x10 Screw (D4x6pcs) as shown.
C23
D1
D4
Carefully turn the cabinet upside-down.
Attach the Casters (C29x2pcs) into the front legs and the Lockable Casters (C28x2pcs)
into the rear legs.
C29
C28
D6
C29
C28
C16 C17

6
Attach the Wheel Skirt (C24, C25, C26) to the bottom panel using M4x10 Bolts (D8x7pcs) and
M4 Nuts (D3x7pcs) as shown, Then fix the left / right wheel skirts onto the front wheel skirt
using ST4.0x10 Screw (D4x2pcs) as shown.
Unscrew the retaining bolts and retaining nuts from the Balance Weight (C27).
Attach the balance weight to the bottom panel using the retaining bolts and
retaining nuts as shown.
3
4
C24
C25
C26
C27
D8
D4
D3
D8
D3

7
Carefully turn the assembled cabinet right side up.
Attach Drip Tray Left Bracket (B10) to the right legs using ST4.0x10 Screws (D4x2pcs) as shown.
Repeat above process for Drip Tray Right Bracket (B11).
5
6
Attach the Upper Support (C18) to the front legs using M6x15 Bolts (D2x4pcs).
C18
Front Side
Rear Side
B10
a
a
b
b

8
Attach the Door Handle (C19) onto the Left Door (C20) using M6x15 Bolts (D2x2pcs).
Repeat above process for Right Door (C21).
7
8
C19
C20
Fit the doors to the cabinet by depressing the spring pins and placing into the cabinet.
Attach the Basket (C22) onto the right door as shown.
C22

9
9
10
Carefully place the Barbecue Body (B1) onto the body supports and fix using M6x40 Bolts
(D1x8pcs) as shown.
Attach Body Support A (C14) onto the left rear leg and right front leg using M4x10 Bolts
(D8x4pcs) , and attach Body Support B (C15) onto the right rear leg and left front leg using
M4x10 Bolts (D8x4pcs) as shown.
e
e
f
f
f
e
C14
C15

10
11
12
Attach Side Shelf Panel (C4) onto Side Shelf (C3) using M6x15 Bolts (D2x2pcs) and
M6 Nut (D6x2pcs) as shown.
Attach the side shelf assembly to the barbecue body using ST4.0x10 Screw (D4x2pcs) and
M6x15 Bolts (D2x4pcs) as shown.
D4
D2
C3
C4