Outlaw OSB-1 User manual

OSB-1 Outlaw Sound Bar
Amplified Soundbar with DSP Surround
and H-PAS Bass

2
OSB-1 Outlaw Sound Bar
Table of Contents
Table of Contents
This product was designed and manufac-
tured to meet strict quality and safety stan-
dards. There are,however,some installation
and operation precautions which you should
be particularly aware of.
1. Read Instructions. All the safety and
operating instructions should be read
before the system is operated.
2. Retain Instructions. The safety and op-
erating instructions should be retained
for future reference.
3. Heed Warnings. All warnings on the
appliances and in the operating instruc-
tions should be adhered to.
4. Follow Instructions. All operating and
use instructions should be followed.
5. Cleaning.Unplug the appliance from wall
outlet before cleaning.Do not use liquid
cleaners or aerosol cleaners.Use a damp
cloth for cleaning.
6. Attachments.Do not use attachments not
recommended by the product manufac-
turer as they may cause hazards.
7. Water and Moisture. Do not use these
appliances near water: for example,near
a bath tub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near
a swimming pool, and the like.
8. Accessories. Do not place these appli-
ances on an unstable stand, bracket, or
table. The products may fall, causing
serious injury to a child or adult, and
serious damage to the products. Any
mounting of the appliances should
follow the manufacturer’s instructions,
and should use mounting accessories
recommended by the manufacturer.
9. Power Sources. This product should be
operated only from the type of power
source indicated on the marking labels.
If you are not sure of the type of power
supply to your home,consult your appli-
ance dealer or local power company.
10. Grounding or Polarization. This prod-
uct may be equipped with polarized
alternating-current line plugs (plugs
having one blade wider than the other).
This plug will fit into the power outlet
only one way. This is a safety feature. If
you are unable to insert the plug fully
into the outlet, try reversing the plug.
If the plug should still fail to fit, contact
your electrician to replace your obsolete
outlet. Do not defeat the safety purpose
of the polarized plug.
11. Power Cord Protection. Power-supply
cord should be routed so that it is not
likely to be walked on or pinched by
items placed upon or against it, paying
particular attention to cords at plugs,
convenience receptacles, and the point
where they exit from the appliances.
12. Lightning. Unplug the product from the
wall outlet for added protection during
a lightning storm, or when it is left un-
attended and unused for long periods
of time. This will prevent damage to the
product due to lightning and power-line
surges.
13. Overloading.Do not overload wall outlets
and extension cords as this can result in
a risk of fire or electric shock.
14. Object and Liquid Entry. Never push
objects of any kind into this product
through openings, as they may touch
dangerous voltage points or short out
parts that could result in a fire or electric
shock. Never spill liquid of any kind on
this product.
15. Servicing.Do not attempt to service this
product yourself,as opening or removing
covers may expose you to dangerous volt-
age or other hazards. Refer all servicing
to qualified service personnel.
16. Damage Requiring Service. Unplug
this product from wall outlets and refer
servicing to qualified service personnel
under the following conditions:
a. When the power supply cord or plug
is damaged.
b. If liquid has been spilled, or objects
have fallen into the product.
c. If the product has been exposed to
rain or water.
d.If the product does not operate
normally by following the operat-
ing instructions. Adjust only those
controls that are covered by the
operating instructions, as an im-
proper adjustment of other controls
may result in damage and will often
require extensive work by a qualified
technician to restore the product to
its normal operation.
e. If the product has been dropped or
the cabinet has been damaged.
f. When the product exhibits a distinct
change in performance this indicates
a need for service.
17. Replacement Parts. When replacement
parts are required, be sure the service
technician has used replacement parts
specified by the manufacturer or that
the parts have the same characteristics as
the original part.Unauthorized substitu-
tions may result in fire,electric shock or
other hazards.
CAUTION: Danger of EXPLOSION
if battery is incorrectly replaced.
Replace only with the same or
equivalent type. (CR2025)
WARNING: Do not expose batteries
or battery pack to excessive heat
such as sunshine,fire or the like.
18. Safety Check. Upon completion of any
service or repairs to this product, ask
the service technician to perform safety
checks to determine that the products are
in proper operating condition.
19. This product is not intended for use
outdoors.
CAUTION: To prevent electric shock,
match wide blade of plug to wide
slot, insert fully.
CAUTION: No naked flame sources,
such as candles,should be placed on
the apparatus.
PRODUCT DISPOSAL: Cer-
tain international, national
and/or local laws and/or regu-
lations may apply regarding
the disposal of this product.
For further detailed information, please
contact the retailer where you purchased this
product or the Outlaw Audio Importer/Dis-
tributor in your country. A listing of Outlaw
Audio Importer/Distributors can be found on
the OutlawAudio website www.atlantictech-
nology.com or by contacting Outlaw Audio at:
343Vanderbilt Avenue,Norwood,MA 02062,
USA. Phone: [phone].
NOTE: This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to part 15 of the
FCC Rules.These limits are designed to pro-
vide reasonable protection against harmful
interference in a residential installation.This
equipment generates, uses and can radiate
radio frequency energy, and, if not installed
and used in accordance with the instruc-
tions, may cause harmful interference to
radio communications.However,there is no
guarantee that interference will not occur in a
particular installation.If this equipment does
cause harmful interference to radio or televi-
sion reception, which can be determined by
turning the equipment off and on,the user is
encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving an-
tenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
technician for help.
Important Safety Instructions
2 Important Safety Instructions
3 OSB-1 Outlaw Sound Bar
3 Introduction
3 Description
3 What's in the Box?
4 Front Control Panel
5 Rear Connection Panel
6 Remote Control
7 Placement
7 Speaker Placement and Home Theater
8 Setting Display for Orientation
8 Rotating Grille for Orientation
9 Connecting Your System
9 Digital Audio Inputs
9 Analog Audio Inputs
9 Turning Off Your TV's Internal Speakers
11 Modes
11 Surround Modes
11 Speech Enhancement
12 Troubleshooting
12 F.A.Q.
13 Advanced Operations
13 Control Panel Tone Controls
13 Subwoofer Output
13 Front Panel Controls Disable aka "Parental Lock"
13 Restore Factory Defaults
13 Remote Commands
14 Care of Your Speaker
14 Specifications
15 Warranty

Instruction Manual
3
OSB-1 Outlaw Sound Bar
Introduction
Thank you for choosing Outlaw Audio products. Your new speaker com-
ponents are precision-crafted to give you years of enjoyable, trouble-free
service.This manual covers the Outlaw Audio OSB-1 speaker system. This
speaker can be used with all current and past sound formats including
Stereo, Dolby Surround®, Pro Logic II®, Dolby Digital 7.1 and 5.1®, Dolby
Digital EX®, DTS®, DTS ES®, DTS ES Discrete®, DTS Neo:6®, DVD-Audio
and SACD Audio.
IMPORTANT: Although it may seem like asking for driving directions,
please take a few moments to read all of this booklet. It has many
helpful tips and ideas on properly setting up and using your system.
We promise that if you take the time to read and follow these tips
you’ll get better system performance and more enjoyment.
Description
The OSB-1 Outlaw Sound Bar is a 42”-long self-powered soundbar that
delivers multi-channel high-fidelity sound for your home entertainment
system. It features Atlantic’s patented H-PAS bass system, which produces
deep, distortion-free bass without the need for a subwoofer!
Using just two 4” woofers, the OSB-1 Outlaw Sound Bar reaches down to
a solid 47 Hz at very high theater-like SPLs, for an absolutely convincing
and totally satisfying sonic experience. Because of its extended frequency
response and dynamics the OSB-1 Outlaw Sound Bar is the first soundbar
where the subwoofer is truly optional.You no longer have to deal with the
“black box on the floor.” This represents a quantum leap forward in both
acoustic technology and user convenience.
The OSB-1 is powered by an on-board amplifier that supplies 80 total watts
RMS.It also boasts sophisticated Digital Signal Processing with Dolby Digi-
tal®and DTS that effectively develops a 2,3 or 5 channel experience for total
listener immersion in the video program. Dolby and DTS signals are auto-
matically identified and selected by the system. Included is a simple remote
control, but can also be used with most universal remotes.
In addition to its ground-breaking bass capabilities, the OSB-1 Outlaw
Sound Bar’s digital display can be “flipped” to read correctly whether the
unit is sitting on a table or inverted on a flat-screen mount.
Unpacking the Speaker
Use care when unpacking the speaker. Remember to keep the original box
and packing material, in the unlikely event the speaker needs servicing, or
if you move.
For Future Reference
Record the serial number and date of purchase of the speaker here. The serial number is
found on the back of the enclosure.
Serial Number
Date of Purchase
Component Description
What's in the Box?
1 OSB-1 Outlaw Sound Bar
1 OSB-1 Mounting Template
2 tall feet 4 short feet 1 Optical Cable
AC Power Supply Power Supply Cable
Remote Control
(battery included)
Quick Start Guide
Inverse Control Panel Label
SOURCE
MODE
•2-CHANNEL
•3-CHANNEL
•5-CHANNEL
•5-EXPANDED
SPEECH
MUTE
TREBLE
VOLUME
BASS
MODESOURCE S1 IN
BASS
SPEECH
TREBLE

4
OSB-1 Outlaw Sound Bar
1
Front Control Panel
Central Display
This 2-character display offers feedback on various operations
including volume,source selection.
Mode Button
Momentarily press to cycle through various surround modes. See
page 11 for details on surround modes. Also used to adjust Tone
Controls (see pg. 13).
Source Button
Momentarily press to cycle through different Sources.Central Dis-
play will confirm source by temporarily displaying selected source
(S1 through S5).
Volume Up/Down Buttons
Press to adjust volume.Max volume is 30.Also used to adjust Tone
Controls (see pg. 13)
Power Status LED
This will be green for ON condition, amber for STANDBY.
Power/Mute Button
When OSB-1 is in STANDBY, press momentarily to turn unit ON.
When OSB-1 is ON, press momentarily to toggle MUTE. When
OSB-1 is ON, press and hold to turn unit to STANDBY.
IR Receiver
Allows control of unit by included IR remote or Universal Remote.
Source 1 (S1) Input
Front accessible 1/8" mini phono jack input for portable device
such as an iPod, MP3 player or mobile device.
Acoustic Controls Status Display
These status displays will illuminate when adjusting TREBLE or
BASS or when SPEECH ENHANCEMENT is on. Use the remote
to make these adjustments. For adjustment of these controls from
Front Control Panel see Advanced Operation on pg. 13.
1
4
3
2
8
9
Figure 1
5
2 3 5 6 7 8 9
6
7
4
System Components Details

Instruction Manual
5
1
Rear Connection Panel
24VDC 4A IR IN S3 INS2 IN S4 IN S5 IN analog
digital
coaxial optical L R
SUB OUT ON/OFF
24VDC 4A IR IN S3 INS2 IN S4 IN S5 IN analog
digital
coaxial optical L R
SUB OUT ON/OFF
Source 4 (S4) Input
Second of two Digital Optical Audio Inputs.For sources with Opti-
cal (Toslink) style digital outputs.
Source 5 (S5) Input
Analog Stereo Audio Input. For sources without digital outputs.
Sub Out
Analog LFE audio output for connection to an optional subwoofer.
Sub Out On/Off Button
Button toggles Sub Out On/Off.When unit is in STANDBY, press
and hold to turn Sub On (display will read "S1") or Sub Off (dis-
play will read "S0").
Power Input
24Volt DC 4Amp input for power.Use only with appropriate power
supply.
Rear IR Receiver
This rear facing IR window is designed for the application of an
adhesive IR flasher (emitter). Flasher not included.
Source 2 (S2) Input
Digital Coaxial Audio Input. For sources with Coaxial (RCA) style
digital outputs.
Source 3 (S3) Input
First of two Digital Optical Audio Inputs. For sources with Optical
(Toslink) style digital outputs.
1
4
3
2
8
Figure 2
2 3 5 6 7 8
6
6
7
4
System Components Details

6
OSB-1 Outlaw Sound Bar
SOURCE
MODE
•2-CHANNEL
•3-CHANNEL
•5-CHANNEL
•5-EXPANDED
SPEECH
MUTE
TREBLE
VOLUME
BASS
1
2
3
4
6
7
9
8
5
Remote Control
Mute Button
Mutes audio output. Press to toggle mute on/off.
Speech Enhancement Button
Press to toggle Speech Enhancement on/off. Speech Enhancement
circuit adjusts audio to increase intelligibility in environments with
excessive background noise.
Treble Adjustment Buttons
Press buttons to adjust Treble output incrementally up or down.Maxi-
mum adjustment of +/- 8dB in 1dB increments.
Battery Tab
This clear plastic tab must be removed to allow remote to operate.Pull
tab from remote and discard.
Power Button
Press to toggle OSB-1 between ON and STANDBY.
Source Button
Press to cycle through different Sources.
Bass Adjustment Buttons
Press buttons to adjust Bass output incrementally up or down.
Maximum adjustment of +/- 8dB in 1dB increments.
Volume Buttons
Press buttons to adjust volume up or down. Max volume is 30.
Mode Button
Momentarily press to cycle through various surround modes.See
page 11 for details on surround modes.
1
4
5
3
27
8
9
Figure 3
6
System Components Details
The OSB-1 has 3 options for working with remote controls.
• The dedicated remote control provided with your system.
• Universal remote controls. We have provided the source code required
for programming many universal remote controls. (this may need to
be programmed by a professional custom installer)
• Multi device remote controls that are pre-programmed to be used with
many devices, such as ones provided by many cable or satellite TV
providers. If your multi-device remote control has the ability to control
an audio receiver then it will most likely allow you to operate the basic
functions of the OSB-1. Simply follow the instructions for the remote
control and usethecode providedforMarantz receivers. The functions
accessible are: On/Off,Mute,Volume Up/Down

Instruction Manual
7
Placement
Speaker Placement and Home Theater
Remember that the primary goal of a good home theater is not to make you
believe that you are in a movie theater.It’s to make you believe you’re in the
movie. For a home theater system,place the OSB-1 speaker either above or
below your flat screen display, centered horizontally.
The OSB-1 can be used as a set-top or shelf-mounted speaker. Self-adhesive
rubber feet are included to prevent vibration,protect the mounting surface
and serve to angle the speaker up or down if needed. See Figure 4.
You may also simply mount the speaker to the wall using the built-in key-
hole brackets or attach it to a suitably equipped articulating flat-panel TV
wall mount via the threaded inserts on the rear panel of the OSB-1. See
Figure 5.
Placement
Figure 4 - Cabinet or shelf mounting Figure 5 - Wall mounting
CAUTION: Because of the high quality components used, the OSB-1
speaker is very heavy for its size and care must be used when hanging it.Be
sure to use a strong screw to drive into the wall, one whose head and shaft
will fit properly within the keyhole opening and slot.Also be sure to drive
the screw directly into a stud or to use a mounting device (such a molly-
bolt) that is capable of safely holding the speaker’s weight. Never simply
drive a nail or screw into sheet rock or other wall materials, as this mount-
ing method may not be sufficient to safely support the weight of the speaker.
NOTE: Always consult a knowledgeable installer regarding the proper
mounting hardware to use with your speakers. Mounting the speaker
safely and securely is the responsibility of the owner.
For wall mounting (or
mounting on a TV bracket),
orient the speaker with
Control Pod on the bottom
For cabinet or shelf mount-
ing, orient the speaker with
Control Pod on the top.
Use the 4 Small
round rubber spacers
for level placement
Use the 2 large rect-
angular feet with 2
of the small round
rubber spacers for
angled placement
Use 2 of the small
round rubber spacers
to isolate the speaker
from the wall
Rubber foot
Rubber feet
Use taller feet for up or down tilt
Adhesive side
Side view
Side view
Adhesive side
24VDC 4A IR IN S3 INS2 IN S4 IN S5 IN analog
digital
coaxial optical L R
SUB OUT ON/OFF
16" (406mm)
97⁄8" (251mm)
415⁄16"
(125mm)
OSB-1 rear

8
OSB-1 Outlaw Sound Bar
Placement
Setting Display for Orientation
Before you begin setup of your system,you must determine the orientation
you want to use for your OSB-1.The OSB-1 can be oriented with the Con-
trol Pod on either the TOP or the BOTTOM of the unit. The OSB-1 comes
pre-configured for use with the Control Pod on Top. If are planning to use
the OSB-1 on a shelf or cabinet or wall-mounted above a TV,this is the ori-
entation you will use.
If you plan to mount your OSB-1 on the wall or bracket underneath a TV,
you may need to set your orientation for the Control Pod on the BOTTOM.
See Figure 6 below.
NOTE: It is important that the unit be set for correct orientation.
Doing so is essential for display to operate properly and to keep cor-
rect Left-to-Right speaker orientation.
Placement
MODESOURCE S1 IN
BASS
SPEECH
TREBLE
Figure 6
Reconfiguring unit for Control Pod on Bottom
MODESOURCE S1 IN
BASS
SPEECH
TREBLE
Step 3
Turn unit over. Make sure unit is in STANDBY. Press and hold both the
UP and DOWN Volume keys at the same time until the Central Display
reads "UP" as shown.
To switch orientation back, simply perform this operation again.
Step 1
Remove label from Front
Control Panel by peeling
down from the edge.
Step 2
Apply included inverse
control panel label.
Rotating Grille for Orientation
Once you have swapped the Control Panel Label and reconfigured the dis-
play, the last thing you will need to do is remove and rotate the grille so
that the logos are in the correct orientation.To do so,gently pry the grille
free from the cabinet starting at both ends.Continue to gently pry the grill
off moving towards the center of the cabinet.Do not use a tool or pick as
this may damage the cabinet.
Once the grille is free, rotate and reattach. Make sure to line up the grille
trees with the mounting cups. Press firmly until the grille is once again
flush with the cabinet.
MODESOURCE S1 IN
BASS
SPEECH
TREBLE

Instruction Manual
9
Mounting
Connecting Your System
The OSB-1 offers a variety of both analog and digital audio source inputs.
Each were designed for particular uses.
NOTE: For optimum audio performance, we recommend that you
use a source with a digital output (either optical Toslink or coaxial)
connected directly to the OSB-1. It is particularly important to directly
connect digital A/V sources (such as DVD players and cable boxes), as
routing through a TV may cause loss of the multi-channel encoding
used to generate DTS and Dolby Digital.
Digital Audio Inputs
The OSB-1 offers three digital inputs.A digital coaxial (RCA) audio input for
Source 2 (S2) and optical (Toslink) audio inputs for Sources 3 and 4 (S3 and
S4). There is no audible benefit of one connection over the other. Different
source components simply have different types of output connections.See
Figures 7 and 8 for connection diagrams.
Analog Audio Inputs
The OSB-1 offers two analog inputs.The mini-jack analog audio connection
for Source Input 1 (S1) on the front of the unit is designed for quick and
easy connection of a portable audio device such as a mobile phone,iPod or
MP3 player. See pg. 10 for diagrams.
The stereo RCA analog audio connection for Source Input 5 (S5) on the rear
of the unit are designed for audio sources which don't have digital audio
outputs. See pg. 10 for diagrams.
NOTE: When using an analog input, the additional channels required
for multi-channel output will be interpolated by the DSP (Digital Sig-
nal Processor) in the OSB-1.
Turning Off Your TV's Internal Speakers
We recommend that you turn off your TV's internal speakers.It’s impossible
to give specific instructions on how to turn off the speakers for every TV,but
here is a way to do it that covers many of the TVs out there.
1 . On your TV remote control, find a “menu” or “setup” button.
2 . Press this button. You should see an on-screen menu.
3 . Next, look for an option to control audio functions and
select it.
4 . The setting to turn off your TV’s internal speakers should
be here.
Power Supply
A separate power supply and power supply cable has been included with
your system. After the audio connections have been made, connect the
cable from the power supply to the 24VDC jack in the rear of the OSB-1.
Then connect the power supply cable to power supply and plug the cord
into an active outlet.
NOTE: The power supply provided is capable of working with volt-
ages from 100-240 volts.
Rear of TV
Rear of OSB-1
24VDC 4A IR IN S3 INS2 IN S4 IN S5 IN analog
digital
coaxial optical L R
SUB OUT ON/OFF
Optical cable (included) from TV
Digital Audio Out to OSB-1 Source 3
(S3) Optical Input
Figure 7 Simplest Connection Method
The simplest method to connect your OSB-1 is from the digital output on your TV.
This would allow the sources to be switched at the TV. Unfortunately many TV
manufactures down convert their digital output signal and this removes the DTS and
Dolby encoding used to generate detailed multi-channels. Although your system
will function you will not receive the full impact provided by using DTS and Dolby
encoded signal. Please consult the instruction manual for your TV or contact the
manufacturer before using.

10
OSB-1 Outlaw Sound Bar
Connecting Your System
Rear of Cable Box or
Satellite Receiver
Rear of Analog TV
Headphone jack
of Mobile Device
Rear of DVD Player
Rear of OSB-1 Front of OSB-1
24VDC 4A IR IN S3 INS2 IN S4 IN S5 IN analog
digital
coaxial optical L R
SUB OUT ON/OFF
24VDC 4A IR IN S3 INS2 IN S4 IN S5 IN analog
digital
coaxial optical L R
SUB OUT ON/OFF
MODESOURCE S1 IN
BASS
SPEECH
TREBLE
Optical cable 1 (one
included) from Digital
Audio Out to OSB-1 Source
3 (S3) Optical Input
Optical cable 2 (not
included) from Digital
Audio Out to OSB-1 Source
4 (S4) Optical Input
Figure 8 Optimum Audio Performance Method
For optimum performance connect all your sources directly to the OSB-1 using the
digital output from each source. This will guarantee the highest sound quality and
reduce the risk of signal loss.
Figure 9 Mobile Device Connection via Analog mini-jack
COMPONENT OUT DIGITAL
AUDIO OUT
(COAXIAL)
DIGITAL
AUDIO OUT
(OPTICAL)
COMPONENT OUT DIGITAL
AUDIO OUT
(COAXIAL)
DIGITAL
AUDIO OUT
(OPTICAL)
1/8" Mini Cable (not included) from mobile
device to OSB-1 Source 1 (S1) input
Figure 10 TV Connection via Analog RCA
1
INPUTS
2
OUTPUT
Stereo RCA Cable (not included) from TV analog stereo
output to OSB-1 Source 5 (S5) analog input
Rear of OSB-1

Instruction Manual
11
Connecting Your System
Modes
Surround Modes
This product was designed to take advantage of today’s advanced digital
sound recordings. The system automatically detects both DTS and Dolby
soundtracks and processes the signal using sophisticated Digital Signal
Processing (DSP). You have a choice of 4 modes for listening.
As you cycle through the Modes, the central display will show the current
mode for a brief period.
2C: 2-channel mode is like a traditional stereo music system,
optimized for pure audio accuracy.
Front
Left
Front
Right
Front
Left
Front
Right
Center
Right
Surround
Effect
Left
Surround
Effect
Front
Left
Front
Right
Center
Front
Left
Front
Right
Center
Right
Surround
Effect Plus
Left
Surround
Effect Plus
5C: 5-channel mode has moderate virtual surround effect and
moderate vocals. Most people prefer this setting for most pro-
gram material.
3C: 3-channel mode has no virtual surround effects and strong
vocals. Use this setting if vocal clarity is very important to you.
5E: 5-channel Expanded has strong virtual surround effect and
moderate vocals. Many people prefer this setting when watching
movies.
Speech Enhancement Mode
The OSB-1 has a special Speech Enhancement Mode. When engaged, the
DSP boosts the frequency range where human voices are reproduced and
directs more of those frequencies to the front center image.This effect gives
you the ability to boost the intelligibility of speech in situations where there
is a lot of background noise such as those generated by a running air con-
ditioner or dishwasher.
NOTE: Although Speech Enhancement can be engaged in all Sur-
round Modes, it is more effective the less surround effect you use.
It is most effective in 2-Channel and least effective in 5-Channel
Expanded.
Figure 11 Surround Modes

12
OSB-1 Outlaw Sound Bar
Connecting Your System
Troubleshooting
My OSB-1 was responding to commands, but now it isn't. What
should I do?
In this rare event, simply unplug the power cord from the rear of the unit,
wait 10 seconds, and then plug the power cord back in.This should restore
control.
The bar does not power on.
• Ensure you have plugged the power supply into a live wall outlet.
• Ensure that all components of the power supply are connected properly.
• Ensure the power supply is properly connected to the bar power input.
• Ensure that the Battery Tab has been removed from the remote.
No sound from the bar.
• Check that the TV or cable box is providing a signal. Check that the bar
is receiving power and is turned on.
• Turn up the volume of the bar.
• Check the input cables to make sure they are connected securely.
• Turn up the volume of your television or cable box.
• Check mute status: Is the central display showing "––"? If so, press the
Mute buttonontheremoteorpresstheStandby/Mutekey ontheOSB-1.
The sound coming from the bar is distorted.
• Check the signal source to ensure the distortion is not coming from
there.
• Audio processing (see FAQ’s for further information)—there may
be audio processing occurring prior to reaching the bar. Disable this
processing.
F.A.Q.
My TV does not have a digital output. How do I connect my audio?
You have several options for connecting your audio:
• Use the optical or coaxial digital output of your cable/satellite box and
connect directly to the OSB-1.
• Use the headphone output of your TV and connect directly to the OSB-
1 using a 1/8" (3.5mm) stereo phono cable to Stereo RCA cable (not
provided).
• Use the RCA audio outputs (white/red pair) on your TV and connect
directly to the OSB-1 using a stereo RCA cable (not provided).
What if my provided optical cable is too short?
We did our best to provide an adequate sized cable; however, there might
be a few setup instances in which the cable may be too short. If that is
your situation, your local electronics store will have cables that meet your
required length.
My audio sounds strange and distorted.
Your OSB-1 requires a clean,unaltered signal for proper audio performance.
If the sound from your OSB-1 is strange or distorted,then check the audio
menus of whatever source(s) are connected to your OSB-1 and make sure
any audio processing is turned off.
The best results will be attained by using one of the OSB-1's digital inputs.If
given the option, choose either the DTS or the Dolby Digital signal on your
source equipment for optimum performance.
How do I control the OSB-1?
There are three ways to control your OSB-1:
• Use the buttons on the front of the bar.
• Use the provided remote control.
• Program your existing remote to control the OSB-1.
To contact Customer Service:
If you have a question or comment contact us.Call Outlaw Audio Customer
Service: 866-OUTLAWS (688-5297) or 866-OUTLAWA (688-5292). (M-F
9-5 EST) or via our online support at http://support.outlawaudio.com.

Instruction Manual
13
Surround Modes
Advanced Operations
We recommend that you adjust your tone controls via remote from your lis-
tening position.However,you can access all tone controls,Speech Enhance-
ment, and Mute from the front of the OSB-1. That way, in the event you
lose your remote,you can still access every command.There are also other
optional features that can be accessed using the Control Panel buttons.
Control Panel Tone Controls
For all adjustments, the Central Display will show the level of adjustment.
To adjust Tone Controls from the front of the OSB-1 unit:
1. Press and hold the MODE button on the Control Panel until
the word TREBLE illuminates.
2. Release the MODE button and use the VOLUME UP and
VOLUME DOWN keys to adjust.
3. Press the MODE button again to access BASS Controls and
adjust in a similar manner.
NOTE: For BASS and TREBLE adjustments, tone can be adjusted from
"-8" (-8dB) to "8" (+8dB) where "O" represents flat.
4. Press the MODE button once again to access the SPEECH
Enhancement feature. Press VOLUME UP or DOWN to toggle
speech enhancement on/off.
NOTE: For SPEECH Enhancement, display will read "SP" then
"On" (for Speech Enhancement On) or "SP" then "OF" (for Speech
Enhancement Off).
5. Repeated presses of the MODE button will cycle through the
available adjustments.
Subwoofer Output
The OSB-1 was designed to provide deep bass extension without requiring
an additional powered subwoofer. However, if you want to add extra bass
impact and extension, the OSB-1 offers a Sub-Out.When the subwoofer is
added, the system automatically adjusts the frequency range sent to the
front channels so the power is not wasted reproducing effects in the sub-
woofer region.
If you are using a separate subwoofer, it is necessary that you turn on the
Subwoofer Output.Unit must be in STANDBY.Press and hold Sub Out On/
Off button on rear of Connection Panel for 3 seconds.Watch Central Display
for confirmation of changes: "S1" means Sub On,"S0" means Sub is Off.
Front Panel Controls Disable aka "Parental Lock"
If your OSB-1 is mounted in a position where small children can reach it
or if you simply don't want anybody adjusting the OSB-1 from the front
panel,we offer a hidden "Parental Lock".To activate this feature,first make
sure that the unit is in STANDBY.Then press and hold the SOURCE button
(on the front Control Panel) and the SUB OUT ON/OFF button (on the rear
Connection Panel) simultaneously. The Central Display will confirm the
change as follows: "Fd" means Front Disabled, "FE" means Front Enabled.
Restore Factory Defaults
To reset all setting to factory default. Press and hold the following 3 keys
simultaneously for 5 seconds: SOURCE,VOLUME UP,VOLUME DOWN.
Remote Commands
This is a complete list of remote codes that can be used to control the OSB-
1.These codes may be used by custom integrators to allow more advanced
integrated systems remotes to control the OSB-1.This list includes discrete
codes for many functions not available on the standard system remote or
universal remote controls.
NOTE: The code structure is "NEC," type custom code 40H, 40H
OSB-1 Command Code
Power on/off toggle 00H
Power on 03H
S1 input 0AH
S2 input F2H
(spare) CAH
S3 input D2H
S4 input 32H
S5 input 72H
voice mode toggle 01H
mute off 28H
mute on 52H
5E mode 62H
5C mode A2H
3C mode 92H
2C mode E2H
mode cycle 2C-5E AAH
input cycle S1-S5 04H
voice on 12H
voice off 6AH
power off 18H
Volume + A8H
Volume - 68H
mute toggle 48H
Treble + 78H
Treble - F8H
Bass + 02H
Bass - 82H

14
OSB-1 Outlaw Sound Bar
Advanced Operations
Specifications
Specifications OSB-1 Outlaw Sound Bar
Type: Powered 2/3/5 channel soundbar
Inputs (rear panel): (2) Toslink optical connectors,
(1) Digital co-ax, (1) analog L/R
Inputs (front panel): (1) analog mini jack for iPod, MP3, etc.
Drivers: (2) 4” woofers
(2) ¾” tweeters
Frequency Response: 47Hz-20kHz +/-3dB
Crossover frequency: 4kHz
Dimensions (W x H x D): 42¾ x 5½ x 6½” (1086 x 140 x 166mm)
Weight: 20lbs (+1lb with power supply)
Power Requirements: 24VDC, 4.0A (by supplied AC adapter)
AC Adapter: 100-240VAC, 50/60Hz, 100W Max
Remote Control Battery: CR2025
Outlaw Audio and the Outlaw Audio logo are a registered trademarks of Outlaw Audio, LLC.
H-PAS and the H-PAS logo are trademarks of Atlantic Technology International, Corp.
U.S. Patent: 8,094,855 B2 H-PAS is a trademark of Atlantic Technology International, Corp.
All rights reserved.
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol
are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other
U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together
are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All Rights Reserved.
The contents of this manual are Copyright ©2012 by Outlaw Audio, LLC and may
not be duplicated or reproduced by any means, whether physical, electronic or
otherwise without prior written consent from Outlaw Audio, LLC.
Specifications are those in effect at the time of printing. Outlaw Audio, LLC. reserves the right
to change specifications or designs at any time without notice without obligation to modify
existing units.
Care of Your Speaker
Clean your cabinet using a soft, lint-free cloth.If you wish,you can slightly
moisten the cloth with plain water. Do not use any other cleaning agents
or chemicals.Be careful not to get any water on the driver cones or tweeter
domes. After carefully removing the grilles from the speaker, gently clean
them with a very slightly damp,lint-free cloth.To do so,gently pry the grille
free from the cabinet starting at both ends.Continue to gently pry the grill
off moving towards the center of the cabinet. Do not use a tool or pick as
this may damage the cabinet.
Avoid placing your speakers in direct sunlight or near a source of heat that
may, over time, damage the finish.
IMPORTANT: SAVE YOUR BOX! If you can do so, save the carton,
packing pieces, and plastic bags that came with your speaker. They
will be useful in case you move or have to ship your loudspeaker for
any reason. In any case, save all packing materials until you are cer-
tain that the system has suffered no damage in shipment. If you find
such damage, either visible or internal, contact your dealer immedi-
ately.

Instruction Manual
15
Warranty
Outlaw Audio Limited Warranty
This warranty protects the owner of the Outlaw OSB-1 sound bar (the
PRODUCT) for three (3) years from the date of purchase.
This warranty covers all defects in material and workmanship with the fol-
lowing specific exceptions.These are:
• Damage caused by improper installation or adjustment
• Damage caused by accident, unreasonable use or neglect
• Damage from failure to follow instructions contained in this Owner’s
Manual
• Damage from the performance of repairs by someone not authorized
by Outlaw Audio
• Any unit on which the serial number has been defaced, modied, or
removed
• Damage occurring during shipment
• Units which have been altered or modied in design, appearance or
construction
This warranty covers only the actual defects within the PRODUCT itself.IT
DOES NOT cover costs of installation in (or removal from) a fixed installa-
tion,or normal set-up, claims based on any misrepresentation by the seller,
or performance variations resulting from installation related circumstances
such as signal quality,AC power or incompatibilities with speakers and/or
other system components.
During the warranty period, Outlaw Audio will, at its option, either repair
the defect, or replace the defective product, or the defective parts, or com-
ponents thereof at no charge to the owner for parts and labor covered by
this warranty.
If necessary repairs are not covered by this warranty, or if a unit is exam-
ined which is not in need of repair, you will be charged for the repairs and/
or the examination.If non-warranted repairs are needed,we will notify you
of the estimated cost and ask for your authorization to perform said repairs.
You must pay shipping charges incurred in getting your Product to the fac-
tory. We will pay the return shipping charges if the repairs are covered by
the warranty. Please save the original shipping cartons as the unit MUST
be returned in the original carton and packing.
(Replacement cartons are available at a modest charge.)
If your product needs service, please call Outlaw Audio LLC at 866-OUT-
LAWS (688-5297) or 866-OUTLAWA (688-5292).
You will need to present the original bill of sale to establish the date of pur-
chase. In the event that the proof of purchase cannot be established with
the original receipt, the warranty period shall be determined by the earli-
est date of manufacture shown on the unit,provided that the serial number
label has not been altered in any manner, or by our records relating to that
serial number.
In the event that you wish to return your Outlaw sound bar back to us, for
any reason, please call to arrange for a Return Authorization Number. This
will insure that your problem is discussed with a service technician who
will determine if there is a quick solution to your problem.
Outlaw Audio shall not be liable for, in any way responsible for, any inci-
dental or consequential damages of any kind. Some states do not allow
limitations on how long an implied warranty lasts and/or do not allow the
exclusion of incidental or consequential damages,therefore,the limitations
and exclusions stated herein may not apply to you.This warranty gives you
specific legal rights; and you may also have other rights which vary from
state to state.
THERE ARE NO WARRANTIES GIVEN BY OUTLAW AUDIO WHICH
EXTEND BEYOND THE DESCRIPTION GIVEN HEREIN.ANY IMPLIED
WARRANTIES OF FITNESS FOR PURPOSE SOLD, MERCHANTIABIL-
ITY, DESCRIPTION, QUALITY OR ANY OTHER MATTERS ARE LIMITED
TO THE TERMS OF THE EXPRESSED LIMITED WARRANTY STATED
HEREIN.
Products are sold on the basis of specifications applicable at the time of
sales. Outlaw Audio shall have no obligation to modify products once they
have been sold.
This warranty is applicable only in the United States.
For applicability in other countries,please call Outlaw Audio.

Outlaw Audio P.O.Box 975 Easton, MA 02334 866-OUTLAWA (688-5292) www.outlawaudio.com