IMPORTANT SAFEGUARDS
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical
shock and injury to persons, including the following:
Read all instructions before using this Fan.
DO NOT use this fan to ventilate areas where flammable liquids or vapors are used,
stored or are present, including paints, gasoline, varnishes, floor refinishing
products or solvents. ALWAYS read and follow all warnings and instructions on the
containers for these products!
ALWAYS be sure the plug fits tightly into the outlet. When plugs fit loosely into
outlets, they may slip partially out of the outlet and create a poor connection. This
may cause outlets to overheat and create a potential fire hazard.
When the fan is not in use, unplug the power cord from the wall outlet. Power
should be also turned off during cleaning, and while moving the fan around.
BE CERTAIN that the power source for the Fan is 120V AC.
If an extension cord is needed, use an extension that have all the certificates and
approval marks of your country regulations.
DO NOT route power cord under rugs, carpets, runners or furniture. This may
damage the cord or cause it to overheat creating a fire hazard.
ALWAYS place the Fan on a stable, flat, level surface while in operation to prevent
the Fan from overturning.
NEVER insert or allow fingers or objects to enter grill openings while Fan is in
operation or injury and/or damage to the Fan may occur.
To reduce the risk of electrical shock and fire please observe the following instructions: