IMPORTANT SAFETY NOTES
When using your hand blender, basic safety precautions should always be followed, including the following:
Check if the main power voltage corresponds to the voltage shown on the marking plate.
This appliance is not intended for persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
The device must be placed on a flat and stable surface.
Always disconnect the blender from the power supply if it is not in use and before assembling,
disassembling or cleaning.
Do not allow children to use the blender without supervision.
Do not switch the appliance ON if it appears to be damage in any way.
Do not immerse the base into the water for cleaning.
Do not start the hand blender or press the control button with wet hands.
The water temperature should not be over 140 °F when cleaning the hand blender.
Do not run the hand blender for a long-time, otherwise the inner parts might be damaged.
When the motor is running, do not insert your finger or other objects into the machine and
container.
If any power cord, plug or other parts and units damage, do not use your hand blender.
Don’t use any foreign accessories that are not recommended by the supplier.
Do not make any modifications in any way or try to extend the power cord.
Do not use outdoors or for any purpose other than its intended use.
Care shall be taken when handling the sharp cutting blades, emptying the container and during
cleaning. Do not try to use the cutting blade or accessory other than its intended use to prevent any
danger.