Overland Storage SnapServer 210 User manual

Snap Server™ 210
Snap Server™ 110
Quick Start Guide
and User CD
Kurzanleitung und Benutzer-CD
Guía de iniciación rápida y CD del usuario
Guide de mise en route rapide et CD de l’utilisateur
Guida rapida all’uso e CD utente
Р у к о в о д с т в о п о б ы с т р о й у с т а н о в к е и
компакт-диск User CD

Hardware Features
1 Power button 9 USB ports (4)
2 Reset button 10 Service connector
3 Power LED 11 Ethernet port
4 Status LED 12 Ethernet cable
5 Network LED 13 Power supply
6 Disk LED 14 Power connector retention clip
7 Kensington Lock connector 15 Power cables (1 US, 1 UK, 1 EU))
8 Power connector 16 Quick Start Guides and User CDs (3)
Note The USB connectors on the back of the Snap Server cannot be used for administrative purposes. Snap Servers
are managed via the browser-based Administration tool.
12
14
13
2
1
3456
7
8
10 11
9
15 16
Quick Start Guide
and User CD
Kurzanleitung und Benutzer-CD
Guía de iniciación rápida y CD del usuario
Guide de mise en route rapide et CD de l’utilisateur
Guida rapida all’uso e CD utente
Руководство по быстрой установке и
компакт�диск User CD
Quick Start Guide
and User CD
Kurzanleitung und Benutzer-CD
Guía de iniciación rápida y CD del usuario
Guide de mise en route rapide et CD de l’utilisateur
Guida rapida all’uso e CD utente
Руководство по быстрой установке и
компакт�диск User CD
Quick Start Guide
and User CD
Kurzanleitung und Benutzer-CD
Guía de iniciación rápida y CD del usuario
Guide de mise en route rapide et CD de l’utilisateur
Guida rapida all’uso e CD utente
Руководство по быстрой установке и
компакт�диск User CD

About This Guide
This guide shows you how to connect your Snap Server 110 or 210 to your network and configure it using the
Guardian OS. The instructions consist of 5 steps:
Step 1: Verify the contents of your shipping package.•
Step 2: Connect power and network cables.•
Step 3: Turn on the Snap Server.•
Step 4: Connect to the Snap Server for the first time.•
Step 5: Start Using your Snap Server.•
Step 1: Verify the Contents of the Shipping Package
Before you begin installation, check the contents of your Ship Kit to make sure you have all the components
described in the Hardware Features section.
Step 2: Connect Power and Network Cables
1 Use the provided ethernet cable to connect your Snap
Server to the network.
2 Insert the retention clip into the divets above the power
connector (see illustration).
3Connect the power supply to the server, inserting the cord
into the retention clip.
4Connect the power cord to a UPS and/or electrical
outlet.
Note: Snap Servers are designed to work with an APC-
brand, USB- or network-based UPS device to automatically
shut down cleanly in the event of an extended power failure.
You must configure the APC unit in the Administration Tool and in the APC user interface.
Step 3: Turn on the Snap Server
To turn on the server, press the power button on the front of the server.
The server will take a few minutes to initialize. When the Status light
begins to blink steadily (about once per second), your Snap Server is
operational.
Power

Step 4: Connect to the Snap Server for the First Time
Your Snap Server is preset to get an IP Address automatically. If your network does not assign IP Addresses
automatically, use the Connect Using Snap Server Manager procedure below to assign one manually.
1 Find the server name. The default server
name is SNAPnnnnnn, where nnnnnn is the
server number. The server number is a unique,
numerics-only string that appears on a label on
the underside of the server chassis.
2 In a Web browser, enter the following URL:
http://SNAPnnnnnn (where SNAPnnnnnn is
the server name)
3 Press Enter. The Web View screen opens.
Note If the Web View screen does not open,
use the Connect Using SSM procedure below.
4 Log into the Administration Tool. Click the
Administration link. In the login dialog box,
enter admin as the user name and admin as
the password, then click OK.
5 Complete the setup procedure using the Initial
Setup Wizard.
Connect Using Snap Server Manager (SSM)
Use this procedure if your network does not assign IP addresses automatically or cannot resolve the server name
to an IP address.
1 Install SSM. Double-click the Install_SnapServerTools.html file on your Snap Server User CD. Be sure to install
SSM on a computer residing on the same network segment as your Snap Server.
2Launch SSM. SSM will discover all Snap Servers on the local
network segments, and will display IP addresses for servers
with IP assignments and 10.10.10.10 for servers with no IP.
3If you need to assign an IP address, right-click the server name
and select Set IP Address. Enter an IP address and a subnet
mask, then click OK.
4Launch the Administration Tool. Right-click the server name and
select Launch Web Administration, as shown in the illustration.
5 Click the Administration link. In the login dialog box, enter
admin as the user name and admin as the password, then
click OK.
6Complete the setup procedure using the Initial Setup Wizard.
Step 5: Use your Snap Server
Once installed on your network, the Snap Server appears as a server with shared folders. You can use it to
organize and store files in the same way you use the folders on your local hard disk. By default, there are no
security restrictions when accessing the server, but you can configure your access and security settings through the
GuardianOS. See the User’s Guide for the Snap Server 110 and 210 for more information.
3
1
4
5
2

User CD
Warranty
Garantie
Garantía
Garantie
Garanzia
Гарантийные
обязательства
To obtain service or technical support for
your Snap Server, please visit our Web site at
http://www.snapserver.com, or call 1-888-343-SNAP. For immediate
response to a service inquiry, you can submit a question to our technical support
department using our Expert Knowledge Base System
http://www.snapserver.com/kb
Technischen Service
Sie finden den technischen Service oder Kundendienst für Ihren Snap Server auf unserer Website. Wenn Kunden
sofortige Antworten auf eine Serviceanfrage wünschen, können sie mit Hilfe unseres Expert Knowledge Base System
http://www.snapserver.com/kb
Obtención de servicio de asistencia
Para obtener servicio o asistencia técnica para su Snap Server, visite nuestro sitio Web. Para obtener respuesta inmediata a su solicitud de
asistencia, envíelas en la forma de preguntas a nuestro Sistema experto de base de conocimiento en
http://www.snapserver.com/kb
Obtention d‘un entretien
Pour un entretien ou une assistance technique concernant votre Snap Server, vérifiez notre site web. Pour obtenir une réponse immédiate à
une demande de service, vous pouvez envoyer une question à notre service d‘assistance technique en utilisant notre système de base de
connaissances experte
http://www.snapserver.com/kb
Richiesta di assistenza tecnica
Per informazioni su come richiedere assistenza o supporto tecnici sulle unità Snap Server, visiti il nostro website. Per assistenza
immediata su un problema, è possibile inviare una richiesta al reparto di assistenza tecnica tramite il sistema Expert
Knowledge Base, disponibile all’indirizzo
http://www.snapserver.com/kb
Сервисное обслуживание
Сведения о сервисном обслуживании серверов Snap Server посетите наше веб-узле.
Для быстрого получения ответа на технические вопросы от службы поддержки
их можно размещать в базе знаний Expert Knowledge Base System
по адресу
http:// www.snapserver.com/kb

70990872-003 Rev A
Copyright © 2009 Overland Storage, Inc. All rights reserved
worldwide. All other product names or company names are the
property of their respective owners.
Copyright © 2009 Overland Storage, Inc. Alle Rechte weltweit
vorbehalten. Alle anderen Produktnamen und Firmennamen sind
Eigentum der jeweiligen Unternehmen.
Copyright © 2009 Overland Storage, Inc. Reservados todos los
derechos en el ámbito internacional. Todos los otros nombres
de productos o de compañías son propiedad de susrespectivos
priopietarios.
Copyright © 2009 Overland Storage, Inc. Tous droits réservés
dans le monde entier. Tous les autres noms de produit ou de
société appartiennent à leurs détenteurs respectifs.
Copyright © 2009 Overland Storage, Inc. Tutti i diritti riservati in
tutti i paesi del mondo. Tutti i nomi di prodotti e società sono di
proprietà dei rispettivi proprietari.
© Overland Storage, Inc., 2009. Все права защищены во
всех странах. Прочие названия изделий и компаний являются
собственностью соответствующих владельцев.
Locating your Snap Server
In this Operating System Go to...
Microsoft ® Windows Network Neighborhood, My Network Places, or Network (under
Workgroup)
Macintosh ® Chooser, Network Browser, or Connect to Server menu
NFS Mount the desired Snap Server share
www.snapserver.com 1-888-288-4206